{"product_id":"jandy-pro-series-levolor-k2300-dual-water-leveler-2-sensors-100-ft-cable-two-1-valves-k2300ckc","title":"Jandy Pro Series Levolor K2300 Dual Water Leveler, 2 Sensors, 100 ft Cable, Two 1\" Valves | K2300CKC","description":"\u003ch2\u003e\u003cstrong\u003eProduct Overview\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003eThe Jandy Pro Series Levolor K2300CKC is an electronic water leveler that keeps two bodies of water topped off automatically. This dual kit pairs two level sensors with two 1\" fill valves on 100 ft of sensor cable, so a pool and spa, or a pool and a water feature basin, can each be maintained on its own. The sensors mount anywhere the water sits at a steady level, such as a skimmer or a standpipe, and the controller opens the matching valve only when that level drops. The unit runs on 110 or 220 volts.\u003c\/p\u003e\n\u003ch2\u003e\u003cstrong\u003e⚠️ Important Purchase Notice\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003eThis is an electrical control product. Installation should be done by a qualified pool technician or electrician following the Jandy installation manual and local codes. Inspect the shipment upon arrival and report damage promptly.\u003c\/p\u003e\n\u003cp\u003eWARNING: This product can expose you to chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.\u003c\/p\u003e\n\u003ch2\u003e\u003cstrong\u003eIdeal For\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003ePools with waterfalls, sheer descents, vanishing edges, or other features that lose water to splash and evaporation.\u003c\/li\u003e\n\u003cli\u003ePool and spa combinations that each need their own fill control.\u003c\/li\u003e\n\u003cli\u003eDesert climates where daily evaporation is high.\u003c\/li\u003e\n\u003cli\u003eAdding automatic fill to an existing pad without cutting the deck.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eDual configuration: two sensors and two 1\" valves.\u003c\/li\u003e\n\u003cli\u003e100 ft of sensor cable for flexible equipment placement.\u003c\/li\u003e\n\u003cli\u003eSolid-state sensing with nothing mechanical to wear out or stick.\u003c\/li\u003e\n\u003cli\u003eBuilt-in fill timer that stops the valve if filling runs too long, helping prevent overflow and making leaks easier to spot.\u003c\/li\u003e\n\u003cli\u003eSealed, water-resistant enclosure rated for equipment rooms.\u003c\/li\u003e\n\u003cli\u003eWorks on 110V or 220V power.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\u003cstrong\u003eBenefits\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eKeeps water at the right level so skimmers and pumps don't run dry.\u003c\/li\u003e\n\u003cli\u003eEliminates manual topping off with a hose.\u003c\/li\u003e\n\u003cli\u003eNo deck-mounted fill canister or pressurized fill line under the deck.\u003c\/li\u003e\n\u003cli\u003eFill time-out protects against wasted water from an unnoticed leak.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\u003cstrong\u003eCompatibility\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003eDesigned for residential pool and spa systems, new or existing. The sensors install at any point with a stable water level, such as a skimmer or standpipe, and no changes to the pool shell or deck are required. Check your fill-water supply size against the 1\" valves before ordering.\u003c\/p\u003e\n\u003ch2\u003e\u003cstrong\u003eInstallation or Upgrade Context\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003eMount the controller at the equipment pad, set each sensor where the water level is steady, route the sensor cables back to the controller, and plumb each 1\" valve into its fill-water line. Wire the unit to 110V or 220V power per the manual, then test each zone and set the fill time-out.\u003c\/p\u003e\n\u003ch2\u003e\u003cstrong\u003eWhat’s Included\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eLevolor K2300 controller\u003c\/li\u003e\n\u003cli\u003eTwo level sensors with 100 ft cable\u003c\/li\u003e\n\u003cli\u003eTwo 1\" fill valves\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetails\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eManufacturer\u003c\/td\u003e\n\u003ctd\u003eJandy (Pro Series)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct Type\u003c\/td\u003e\n\u003ctd\u003eElectronic water leveler, dual\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSKU \/ Model\u003c\/td\u003e\n\u003ctd\u003eK2300CKC (K2300 Series)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSensors\u003c\/td\u003e\n\u003ctd\u003e2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSensor Cable\u003c\/td\u003e\n\u003ctd\u003e100 ft\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eValves\u003c\/td\u003e\n\u003ctd\u003eTwo 1\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVoltage\u003c\/td\u003e\n\u003ctd\u003e110\/220V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColor\u003c\/td\u003e\n\u003ctd\u003eBlue\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eApplication\u003c\/td\u003e\n\u003ctd\u003ePool\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShipping Dimensions\u003c\/td\u003e\n\u003ctd\u003e25 x 12.63 x 8.25 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e16.2 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e1 year\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUPC \/ Barcode\u003c\/td\u003e\n\u003ctd\u003e052337029315\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003e\u003cstrong\u003eWarranty\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003eCovered by a one-year manufacturer warranty, subject to Jandy’s applicable terms. Contact Jandy for warranty claim instructions; Pool Supply Depot can provide proof of purchase.\u003c\/p\u003e\n\u003ch2\u003e\u003cstrong\u003eCustomer Q\u0026amp;A\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eCan one unit control a pool and a spa?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. This dual model has two sensors and two valves, so each body of water fills independently.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo I need to cut the deck to install it?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. The sensors go in a skimmer or standpipe, and the controller and valves mount at the equipment pad.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat happens if there's a leak?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe fill timer shuts the valve off after a set time, so the unit won't keep filling endlessly and the leak is easier to notice.\u003c\/p\u003e","brand":"Jandy","offers":[{"title":"Default Title","offer_id":67917916111158,"sku":"K2300CKC","price":1199.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0873\/1167\/9798\/files\/jandy-pro-series-levolor-k2300-dual-water-leveler-2-sensors-100-ft-cable-two-1-valves-k2300ckc-6868835.jpg?v=1793909887","url":"https:\/\/poolsupplydepot.net\/products\/jandy-pro-series-levolor-k2300-dual-water-leveler-2-sensors-100-ft-cable-two-1-valves-k2300ckc","provider":"Pool Supply Depot","version":"1.0","type":"link"}