Product Overview
The Raypak Element Tube Assembly 0005/0011 Kit | 017139F is a genuine Raypak replacement part designed for compatible Raypak heater applications. This kit is used when the existing element tube assembly is worn, damaged, leaking, corroded, or no longer performing properly.
Raypak heater parts must be matched carefully by model, serial number, part number, and heater configuration. Always confirm that 017139F is the correct replacement kit for your specific Raypak unit before ordering.
This is a replacement element tube assembly kit only. It is not a complete heater.
Ideal For
Raypak heater repair
Replacing a worn or damaged element tube assembly
Compatible Raypak 0005 / 0011 heater applications
Pool and spa heater service work
Professional heater maintenance and repair
Customers replacing OEM Raypak heater components
Pool professionals servicing Raypak equipment
What’s Included
Raypak element tube assembly kit
Factory-supplied replacement components included with kit packaging
Manufacturer replacement part packaging
What’s Not Included
Complete heater
Gas valve
Burner tray
Control board
Ignition components
Pressure switch
Header assembly unless included by manufacturer packaging
Additional gaskets, seals, or hardware unless included by manufacturer packaging
Installation labor
Diagnostic service
Plumbing or gas line materials
Compatibility Guidance
The Raypak 017139F Element Tube Assembly 0005/0011 Kit is intended for compatible Raypak heater models that require this exact replacement part.
Before ordering, confirm the following:
You need Raypak part number 017139F.
Your heater model is compatible with the 0005/0011 element tube assembly kit.
Your heater serial number and configuration match this replacement part.
The issue has been properly diagnosed as requiring the element tube assembly.
You are not looking for a complete heater, burner tray, gas valve, control board, or header assembly.
Any required seals, gaskets, or hardware are included or will be purchased separately if needed.
A qualified pool heater technician has confirmed fitment if you are unsure.
Do not order this part by appearance alone. Raypak heater parts can look similar but vary by model, series, fuel type, and configuration.
Confirm Before Ordering
Before purchasing, please verify:
You need part number 017139F.
Your heater uses the compatible 0005/0011 kit configuration.
Your heater model and serial number match this replacement part.
Your technician has confirmed the element tube assembly is the failed component.
You understand this is a replacement kit, not a complete heater.
You have confirmed whether additional gaskets, seals, or hardware are required.
Installation will be completed by a qualified pool heater technician.
Key Features
Genuine Raypak replacement part
Part number 017139F
Element tube assembly 0005/0011 kit
Designed for compatible Raypak heater applications
Used for heater repair and service
OEM-style replacement component
Helps restore proper heater operation when the original assembly is damaged or worn
Important fitment part requiring model verification
Professional diagnosis and installation recommended
Benefits
The Raypak 017139F Element Tube Assembly Kit helps service professionals repair compatible Raypak heaters without replacing the entire unit. When the element tube assembly is the confirmed failed component, replacing it with the correct Raypak part can help restore heater function and extend the usable life of the equipment.
Using the correct replacement part is especially important for heater performance and safety. Proper fitment helps reduce the risk of leaks, poor operation, repeated service issues, or damage to related heater components.
Recommended Use
Use the Raypak 017139F kit when a compatible Raypak heater has been diagnosed as needing an element tube assembly replacement.
This part is best used during professional heater service where the technician has verified the heater model, serial number, part number, and required repair components.
For heaters with ignition failure, gas supply issues, control board errors, pressure switch issues, or burner problems, additional troubleshooting may be required before replacing this part.
Installation Notes
This replacement kit should be installed by a qualified pool heater technician. Heater repair may involve water connections, electrical components, combustion components, pressure testing, leak inspection, startup testing, and safety checks.
Professional installation is recommended to ensure:
Correct heater model verification
Proper part fitment
Safe heater disassembly and reassembly
Correct gasket or seal replacement
Leak-free installation
Proper water flow verification
Safe startup and heater operation
Inspection of related heater components
Compliance with manufacturer instructions and local code
Improper installation may cause leaks, equipment damage, poor heating performance, unsafe operation, or voided warranty coverage.
Important Fitment Note
This item is the Raypak Element Tube Assembly 0005/0011 Kit, part number 017139F. It is not a universal heater part.
Always match the replacement part to the heater model and serial number before ordering. If you are unsure, have a qualified pool heater technician verify compatibility.
Technical Specifications
| Specification | Details |
|---|---|
| Brand | Raypak |
| Model / Part Number | 017139F |
| Product Type | Heater Replacement Part |
| Part Description | Element Tube Assembly Kit |
| Kit Configuration | 0005 / 0011 |
| Application | Compatible Raypak Heater Repair |
| Complete Heater Included | No |
| Universal Fit | No |
| Installation | Professional Installation Recommended |
| SKU | 017139F |
| UPC / Barcode | 840891042365 |
Customer-Facing Q&A
Q: What is the Raypak 017139F used for?
A: It is a replacement element tube assembly kit for compatible Raypak heater applications.
Q: Is this a complete heater?
A: No. This is a replacement part kit only. It is not a complete heater.
Q: What does 0005/0011 mean?
A: It refers to the compatible kit configuration or heater application group. Always confirm compatibility using your heater model and serial number.
Q: Will this fit every Raypak heater?
A: No. Raypak heater parts are model-specific. Confirm part number 017139F before ordering.
Q: Can I order this part by appearance?
A: No. Heater parts can look similar but differ by model, series, and configuration. Always verify the exact part number.
Q: Does this include gaskets or seals?
A: Only the components supplied in the manufacturer’s kit packaging are included. Confirm whether additional gaskets, seals, or hardware are needed before installation.
Q: Who should install this part?
A: A qualified pool heater technician should install this part.
Q: What should I check before ordering?
A: Confirm that your heater requires part number 017139F, that your heater is compatible with the 0005/0011 kit, and that the element tube assembly has been properly diagnosed as the part needing replacement.