Product Overview
The Caretaker V-Clamp with Nut | 3-9-216 is a genuine replacement clamp assembly used on compatible Caretaker 5-Port Water Valve in-floor pool cleaning systems. This V-clamp helps secure the valve assembly together, supporting a tight, stable connection between key valve components.
Designed for Caretaker-style in-floor cleaning valves, this part helps maintain proper valve alignment, water pressure, and leak-resistant operation. It is commonly replaced when the original clamp is bent, corroded, stripped, cracked, missing, or no longer tightening properly.
This replacement is ideal for pool service professionals and homeowners maintaining Caretaker, EnvironPool, and Dust&Vac in-floor cleaning systems.
Ideal For
- Caretaker 5-Port Water Valve systems
- Zodiac / Jandy Caretaker in-floor cleaning systems
- EnvironPool in-floor cleaning systems
- Dust&Vac in-floor cleaning systems
- Replacing a damaged or corroded valve clamp
- Restoring a tight seal on the water valve assembly
- In-floor pop-up cleaning system repairs
- Preventing valve leaks caused by poor clamping pressure
- Pool service maintenance and equipment pad repairs
Key Features
- Genuine Caretaker / Zodiac-style replacement part — designed for compatible Caretaker water valve assemblies.
- Includes clamp and nut — provides the main hardware needed to secure the valve connection.
- Designed for 5-port water valves — commonly used with Caretaker in-floor cleaning valve systems.
- Helps maintain a tight valve seal — supports leak-resistant operation when used with proper O-rings and valve components.
- Stainless steel clamp construction — built for durability in pool equipment environments.
- Supports proper valve operation — helps keep valve components aligned for correct water distribution.
- No special tool required — designed for straightforward service replacement.
- Useful for leak repair — ideal when the old clamp no longer tightens evenly or securely.
- Professional-grade repair part — commonly used by pool technicians servicing in-floor systems.
Benefits
A worn or damaged V-clamp can cause the Caretaker water valve to leak, shift, or fail to seal correctly under pressure. The Caretaker 3-9-216 V-Clamp with Nut helps restore the secure clamping force needed to keep the valve assembly properly fastened.
By replacing a weak or damaged clamp, pool owners can help reduce water leaks, pressure loss, and poor valve performance. This small but important component helps support the automatic zone rotation that in-floor cleaning systems rely on for proper pop-up head operation and pool circulation.
Specifications
| Specification | Details |
|---|---|
| Product Name | Caretaker V-Clamp with Nut |
| Brand | Caretaker / Zodiac / Jandy |
| Part Number | 3-9-216 |
| Alternate MFG Number | 3-9-0216 |
| Product Code / SKU | CTK-201-930 |
| UPC | 738919035362 |
| Product Type | Water valve V-clamp with nut |
| Application | In-floor pool cleaning water valve |
| Compatible Valve Type | Caretaker 5-Port Water Valve |
| Compatible System | Jandy / Zodiac Caretaker In-Floor Cleaning System |
| Compatible Model | Caretaker 5-9-2000 |
| Additional Compatible Systems | EnvironPool and Dust&Vac in-floor cleaning systems |
| Additional Compatible Models | EnvironPool / Dust&Vac 5-9-3000 and 5-9-3010 |
| Material | Stainless steel clamp with nut hardware |
| Color / Finish | Stainless steel / metallic |
| Function | Secures valve assembly components together |
| Common Repair Use | Leaking valve clamp, damaged clamp, missing nut, poor valve seal, pressure loss |
| Installation Location | Caretaker water valve assembly |
| Equipment Category | In-floor pool cleaning valve parts |
| Product Weight | Approx. 0.8 lb |
| Shipping Dimensions | Approx. 8.75" x 8.75" x 0.75" |
| Sold As | Each |
| Professional Installation Recommended | Yes |
Included Components
- 1 × Caretaker V-clamp
- 1 × nut
Note: Water valve assembly, O-rings, pressure relief valve, pressure gauge, bottom plate, center plate, cup strainer, and rebuild kit components are sold separately unless otherwise stated.
Installation Notes
Turn off the pool pump and relieve all system pressure before servicing the water valve. Never loosen or remove clamp hardware while the system is pressurized.
Inspect the existing O-ring, valve body, center plate, bottom plate, pressure relief valve connection, and sealing surfaces before installing the replacement clamp. A new clamp should be installed evenly and securely to avoid leaks or improper valve alignment.
After installation, restart the system and check for leaks around the valve assembly. If leaking continues, inspect the O-ring and valve components for wear, cracks, or misalignment.
Professional installation is recommended, especially if the valve is leaking under pressure or the system is not cycling correctly.
Customer-Facing Q&A
Q: What is the Caretaker 3-9-216 used for?
A: It is a replacement V-clamp with nut used to secure compatible Caretaker 5-Port Water Valve assemblies.
Q: What is the UPC for this product?
A: The UPC is 738919035362.
Q: Does this include the nut?
A: Yes. This item includes the V-clamp and nut.
Q: What systems does this fit?
A: It fits compatible Caretaker 5-Port Water Valve systems, including Jandy / Zodiac Caretaker 5-9-2000 applications.
Q: Does this fit EnvironPool or Dust&Vac systems?
A: Yes. It is also compatible with EnvironPool and Dust&Vac valve systems, including 5-9-3000 and 5-9-3010 applications.
Q: Is this a complete water valve?
A: No. This listing is for the V-clamp with nut only.
Q: Can this help stop a valve leak?
A: Yes, if the leak is caused by a damaged, loose, corroded, or improperly sealing clamp. If the O-ring or valve body is damaged, additional parts may be required.
Q: Is this made of stainless steel?
A: Yes. This clamp is commonly listed as a durable stainless steel V-clamp.
Q: Do I need special tools to install it?
A: No special tool is typically required, but the system must be turned off and depressurized before service.
Q: Should I replace the O-ring at the same time?
A: It is a good idea to inspect the O-ring during clamp replacement. A worn or flattened O-ring can still cause leaks even with a new clamp.