The Century B2849 1.5 HP Pool and Spa Pump Motor is a heavy-duty replacement motor designed for compatible in-ground swimming pool and spa pumps using a 56Y square-flange motor configuration. Built for demanding pool equipment applications, the B2849 combines dependable single-speed performance with durable construction, a corrosion-resistant stainless-steel shaft, sealed ball bearings, and automatic thermal protection.
Rated at 1.5 HP with a 1.50 service factor, the B2849 delivers approximately 2.25 Total Horsepower (THP). The motor operates on 230V, single-phase, 60 Hz power and runs at approximately 3450 RPM.
Its industry-standard 56Y square-flange configuration makes the B2849 a popular replacement motor for many compatible pool pump assemblies.
Key Features
- 1.5 HP full-rated pool pump motor
- 2.25 Total Horsepower (THP)
- 1.50 service factor
- Single-speed operation
- 3450 RPM
- 230V operation
- Single-phase
- 60 Hz
- 56Y square-flange frame
- Permanent Split Capacitor — PSC design
- Threaded stainless-steel motor shaft
- Sealed ball bearings
- Automatic thermal protection
- Open Drip Proof — ODP enclosure
- Continuous-duty rated
- 50°C / 122°F maximum ambient rating
- Switchless motor construction
- Designed specifically for pool and spa pump applications
Product Specifications
| Specification | Details |
|---|---|
| Brand | Century |
| Manufacturer Part Number | B2849 |
| Former Part Number | B849 |
| Product Type | Pool & Spa Pump Motor |
| Horsepower | 1.5 HP |
| Total Horsepower | 2.25 THP |
| Service Factor | 1.50 |
| Speed | Single Speed |
| RPM | 3450 RPM |
| Voltage | 230V |
| Phase | Single Phase |
| Frequency | 60 Hz |
| Amperage | 10.0A |
| Frame | 56Y |
| Flange Type | Square Flange |
| Motor Design | Permanent Split Capacitor |
| Shaft Type | Threaded Stainless Steel |
| Enclosure | Open Drip Proof |
| Thermal Protection | Yes |
| Bearings | Sealed Ball Bearings |
| Duty | Continuous |
| Insulation Class | Class B |
| Maximum Ambient Temperature | 50°C / 122°F |
56Y Square-Flange Motor
The 56Y frame uses the square-flange mounting configuration commonly found on many in-ground pool pumps.
The motor mounts directly to the pump's seal plate, while the threaded shaft connects to the pump impeller.
When replacing an existing motor, customers should verify more than just the listed horsepower. Check the existing motor nameplate for:
- Horsepower
- Service factor
- Total horsepower
- Voltage
- Frame designation
- Flange configuration
- Shaft style
- Pump manufacturer and model
Match Total Horsepower
Replacement motors should be selected according to Total Horsepower (THP) rather than horsepower alone.
The B2849 is rated:
1.5 HP × 1.50 Service Factor = 2.25 THP
A replacement motor should meet the performance requirements of the pump's original motor and impeller configuration.
Durable Pool & Spa Construction
Century designed the B2849 specifically for pool and spa pump environments.
The stainless-steel threaded shaft offers improved resistance to corrosion in pool equipment areas, while sealed ball bearings provide smooth operation and long-term durability.
Its Permanent Split Capacitor motor design provides dependable single-speed performance, while built-in thermal protection helps protect the motor against damaging operating temperatures.
Important: Replace the Pump Shaft Seal
Always install a new mechanical shaft seal when replacing a pool pump motor.
The mechanical seal prevents pool water from traveling along the motor shaft and entering the motor.
Reusing an old shaft seal can result in:
- Water leakage
- Motor bearing failure
- Shaft corrosion
- Electrical damage
- Premature motor failure
The correct shaft seal is determined by the pool pump model, not by motor model B2849.
For best results, identify the exact pump manufacturer and model and install the appropriate shaft seal or pump go-kit during the motor replacement.
Motor Only
The Century B2849 is a replacement motor only.
Unless specifically stated otherwise, the following components are not included:
- Pump housing
- Seal plate
- Diffuser
- Impeller
- Mechanical shaft seal
- Pump gaskets
- O-rings
- Pump unions
- Electrical wiring
Always confirm pump compatibility before ordering.
Energy-Efficiency / Replacement Motor Notice
Federal efficiency requirements affecting dedicated-purpose pool pump replacement motors took effect beginning September 29, 2025. Depending on the application, replacement pool pump motors within the regulated horsepower range may be required to use variable-speed technology.
Customers and installers should confirm whether the B2849 is permitted for their specific replacement application and jurisdiction before installation.
Why Choose Century?
Century is one of the most established names in replacement electric motors for the swimming pool and spa industry. Century motors are widely used by pool service professionals, equipment installers, repair companies, and homeowners looking to restore an existing pump without replacing the complete pump assembly.
The Century B2849 1.5 HP 56Y Square-Flange Pool Pump Motor provides a durable replacement option for compatible 230V pool and spa pumps requiring a 1.5 HP full-rated / 2.25 THP single-speed motor.