Product Overview
The Raypak Crosswind 65-I Heat/Cool Pump | 017745 is a compact, energy-efficient pool and spa heat pump designed to provide year-round water temperature control. With 61,000 BTU heat/cool performance, this unit can heat pool water during cooler weather and help cool pool water during hot summer conditions.
Powered by inverter technology, the Crosswind 65-I automatically adjusts output based on heating or cooling demand. At startup, it can run at higher capacity for faster temperature changes, then shift into a lower-output maintenance mode to help hold the desired temperature efficiently and quietly.
Designed for 208/230V single-phase, 60 Hz electrical service, this heat pump is a strong option for above-ground pools, small inground pools, spas, and residential pool systems where quiet electric heating and cooling are preferred over gas heating.
Ideal For
- Above-ground pools
- Small inground pools
- Pool and spa heating applications
- Pool cooling during hot weather
- Residential pools needing year-round temperature control
- Customers wanting electric heat pump efficiency
- Properties without natural gas or propane service
- Quiet backyard equipment pad operation
- Replacing older small heat pumps or electric heaters
- Saltwater and chlorine pool systems with proper chemistry
- Professional pool equipment installations
Key Features
- 61,000 BTU heat/cool capacity — provides both pool heating and cooling for year-round comfort.
- Inverter technology — automatically adjusts output to match temperature demand.
- Heat and cool operation — warms pool water in cooler weather and helps lower water temperature in extreme heat.
- 208/230V single-phase power — designed for standard residential pool equipment electrical service.
- Spiral titanium heat exchanger — provides corrosion resistance for properly maintained saltwater and chlorine pools.
- Digital controls — allows simple temperature adjustment and system monitoring.
- Whisper-quiet operation — inverter compressor and low-speed fan design help reduce operating noise.
- Compact cabinet — smaller footprint helps make installation easier on crowded equipment pads.
- R-410A refrigerant — proven refrigerant platform used in pool heat pump systems.
- Energy-smart heating and cooling — transfers heat instead of generating heat through combustion.
- No gas or venting required — electric heat pump operation eliminates gas line and flue requirements.
- Professional-grade Raypak design — built for dependable pool and spa temperature control.
Benefits
The Raypak Crosswind 65-I gives pool owners more control over water temperature throughout the season. During cooler months, it helps warm the pool or spa for more comfortable swimming. During hot summer conditions, cooling mode can help reduce overly warm pool water for a more refreshing swim.
The inverter-driven design is a major benefit because it can adjust output in smaller increments instead of cycling harshly on and off. This supports quieter operation, more stable water temperature, and improved energy efficiency.
The titanium heat exchanger adds long-term durability, especially in properly maintained saltwater systems. For customers who want a compact, quiet, electric heater and cooler without gas fuel, the Crosswind 65-I is a strong residential option.
Specifications
| Specification | Details |
|---|---|
| Product Name | Raypak Crosswind 65-I Heat/Cool Pump |
| Brand | Raypak |
| Manufacturer | Rheem / Raypak |
| Series | Crosswind |
| Model | 65-I |
| Part Number | 017745 |
| SKU | 017745 |
| UPC / GTIN | 840891042464 |
| Product Type | Pool and spa heat pump |
| Heater Type | Electric inverter heat pump |
| Function | Heat and cool |
| BTU Rating | 61,000 BTU |
| Rated Output Reference | 61,000 BTU/h at 80/80/80 test condition |
| COP Reference | 5.7 at 80/80/80 test condition |
| Secondary Output Reference | 57,650 BTU/h at 80/63/80 test condition |
| Secondary COP Reference | 5.3 at 80/63/80 test condition |
| Low Ambient Output Reference | 24,500 BTU/h at 50/63/80 test condition |
| Low Ambient COP Reference | 4.1 at 50/63/80 test condition |
| Electrical Input | 1.55 kW |
| Voltage | 208/230VAC |
| Phase | Single phase |
| Frequency | 60 Hz |
| Refrigerant | R-410A |
| Heat Exchanger | Spiral titanium heat exchanger |
| Control Type | Digital controls |
| Technology | Inverter technology |
| Water Flow Range | 28.5–37.5 GPM |
| Maximum Water Flow | 37.5 GPM |
| Minimum Water Flow | 28.5 GPM |
| Minimum Circuit Ampacity | 20A |
| Recommended Breaker Size | 25A |
| Application | Pool and spa heating / cooling |
| Pool Type | Above-ground and small inground pools |
| Saltwater Compatibility | Yes, with properly maintained water chemistry |
| Installation Location | Outdoor equipment pad |
| Equipment Category | Pool and spa heat pumps |
| Professional Installation Recommended | Yes |
| Sold As | Each |
Included Components
- 1 × Raypak Crosswind 65-I Heat/Cool Pump
- Integrated spiral titanium heat exchanger
- Digital control interface
- Factory-installed inverter compressor, fan, and heat pump components
- Manufacturer-supplied installation documentation
Electrical disconnect, breaker, wiring, bonding materials, plumbing fittings, valves, automation wiring, equipment pad materials, and installation labor are sold separately unless specifically included by the supplier.
Compatibility Notes
The Raypak Crosswind 65-I is designed for compatible residential pool and spa systems requiring electric heat pump heating and cooling.
Common application references include:
- Above-ground pools
- Small inground pools
- Pool and spa systems requiring 61K BTU class heating/cooling
- 208/230V single-phase electrical installations
- Systems requiring titanium heat exchanger durability
- Saltwater and traditional chlorine pools with properly maintained chemistry
Always confirm pool size, climate, desired temperature rise, cooling needs, electrical service, breaker requirements, plumbing flow, and equipment pad clearance before ordering.
Installation Notes
The Raypak Crosswind 65-I should be installed by a qualified pool professional or licensed electrician. Proper installation requires correct electrical service, breaker sizing, bonding, grounding, plumbing flow, equipment pad placement, airflow clearance, and startup verification.
Before installation, confirm that the site can support 208/230VAC, single-phase, 60 Hz electrical service and that the water flow falls within the required 28.5–37.5 GPM range.
Heat pump performance varies based on outdoor air temperature, humidity, water temperature, wind exposure, plumbing design, pool size, pool cover usage, and runtime. Proper airflow clearance around the unit is required for efficient heating and cooling performance.
Customer-Facing Q&A
Q: What is the Raypak 017745?
A: It is a Raypak Crosswind 65-I electric heat/cool pool and spa heat pump rated at 61,000 BTU.
Q: What is the SKU?
A: The SKU is 017745.
Q: What is the UPC / GTIN?
A: The UPC / GTIN is 840891042464.
Q: Does this unit heat and cool?
A: Yes. The Crosswind 65-I is designed for both pool heating and pool cooling.
Q: How many BTUs is this model?
A: This model is rated at 61,000 BTU.
Q: What voltage does it require?
A: It requires 208/230VAC, single-phase, 60 Hz electrical service.
Q: What type of heat exchanger does it use?
A: It uses a spiral titanium heat exchanger.
Q: What refrigerant does it use?
A: This model uses R-410A refrigerant.
Q: What is the required water flow range?
A: The listed water flow range is 28.5–37.5 GPM.
Q: What breaker size is recommended?
A: The listed breaker size is 25A, with a minimum circuit ampacity reference of 20A.
Q: Is this good for saltwater pools?
A: Yes. The titanium heat exchanger is suitable for properly maintained saltwater pools.
Q: Is this a gas heater?
A: No. This is an electric heat pump and does not require natural gas, propane, or gas venting.
Q: What size pool is this best for?
A: It is commonly used for above-ground and small inground pools. Final sizing depends on pool gallons, climate, desired temperature rise, pool cover use, and seasonal goals.
Q: Should this be professionally installed?
A: Yes. Professional installation is recommended because the unit requires correct electrical wiring, bonding, plumbing, airflow clearance, and startup setup.