Product Overview
The Pentair PSD1.5HPK PowerEnd Kit is a complete bolt-on replacement power end designed to help restore pump performance without replacing the entire pump system. This kit is built around an OEM Pentair 1.5 HP single speed TEFC motor and includes the key pump components needed for a professional power-end replacement.
The included motor operates on 120/240V, 60Hz power and includes a 2-year manufacturer warranty on the motor.
This kit is ideal when the existing pump housing or wet end is still in usable condition, but the motor-side assembly needs to be replaced. It is commonly used for compatible Pentair-style pump repairs where a complete motor, seal plate, diffuser, impeller, shaft seal, and required gaskets are needed together in one convenient package.
Always verify your existing pump model, horsepower, voltage, impeller size, and wet-end compatibility before ordering.
Ideal For
Pentair-style pump power-end replacement
Replacing a failed or worn 1.5 HP pump motor assembly
Pool pump repairs where the wet end is still reusable
WhisperFlo-style compatible pump applications
SuperFlo-style compatible pump applications, if verified by installer
Pool professionals completing complete power-end repairs
Customers who want a pre-selected motor-side repair kit instead of sourcing parts individually
What’s Included
OEM Pentair 1.5 HP single speed TEFC motor
Seal plate
Impeller
Diffuser
Mechanical shaft seal
Required gaskets included with the kit
Bolt-on PowerEnd assembly components
What’s Not Included
Complete pump assembly
Pump housing / volute
Strainer pot
Pump lid and basket
Union kit
Plumbing fittings
Electrical whip or conduit unless specified
Automation controls
Timer or relay
Installation labor
Additional parts not listed in the included kit contents
Compatibility Guidance
The PSD1.5HPK PowerEnd Kit is intended for compatible Pentair-style pump repairs where the motor-side assembly can be replaced while reusing the existing pump housing or wet end.
Before ordering, confirm the following:
You need a 1.5 HP replacement PowerEnd kit.
Your existing pump housing is compatible with this bolt-on assembly.
Your existing pump wet end is still in usable condition.
Your system voltage and wiring are compatible with the included 120/240V, 60Hz motor.
Your installer has confirmed the correct impeller size and pump fitment.
The seal plate, diffuser, impeller, and gasket configuration match your pump repair needs.
You do not need a complete new pump.
Do not order this kit by horsepower alone. Pump repair parts must match the pump housing, seal plate, impeller, diffuser, and motor requirements.
Confirm Before Ordering
Before purchasing, please verify:
You need the PSD1.5HPK kit.
Your pump repair requires a 1.5 HP single speed PowerEnd assembly.
Your pump housing is compatible with this kit.
Your voltage requirement matches the included 120/240V, 60Hz motor.
Your existing wet end, plumbing, and pump body are still serviceable.
You understand this is not a complete pump.
Your pool professional has confirmed fitment before installation.
Important: If your current listing or internal notes mention a 1 HP impeller, verify the correct impeller before publishing. For a 1.5 HP PowerEnd kit, the impeller listing should be checked and corrected so the title, included parts, and specifications all match.
Key Features
Genuine OEM Pentair TEFC motor
Complete 1.5 HP bolt-on PowerEnd kit
120/240V, 60Hz motor rating
2-year manufacturer warranty on motor
Single speed motor design
Includes key wet-end repair components
Designed to simplify pump power-end replacement
Helps avoid replacing the entire pump when the wet end is reusable
Useful for compatible Pentair-style pump repairs
Convenient kit format reduces individual part sourcing
Professional installation recommended
Built for reliable pool circulation repair applications
Benefits
The Pentair PSD1.5HPK PowerEnd Kit gives pool owners and service professionals a practical way to repair a compatible pump without replacing the full pump assembly. By bundling the motor and key replacement components together, this kit helps reduce part-matching guesswork and makes the repair process more efficient.
The included TEFC motor helps provide added protection compared with open-style motor designs, making it a strong option for pool equipment environments where durability and long-term reliability are important.
For compatible systems, this kit can restore pump operation while preserving the existing pump housing, plumbing connections, and equipment pad layout.
Recommended Use
Use the PSD1.5HPK PowerEnd Kit when the motor-side assembly of a compatible pump needs replacement and the existing pump housing or wet end is still in good condition.
During installation, inspect the pump housing, diffuser area, sealing surfaces, lid, basket, drain plugs, and plumbing connections. Any worn or damaged parts should be replaced before startup to help prevent leaks, poor performance, or damage to the new PowerEnd assembly.
Installation Notes
This kit should be installed by a qualified pool professional or licensed electrician. Pool pump repair may involve electrical wiring, bonding, grounding, pump disassembly, seal installation, impeller installation, gasket placement, alignment, priming, and startup testing.
Professional installation is recommended to ensure:
Correct electrical wiring
Proper bonding and grounding
Correct voltage configuration
Correct seal installation
Proper impeller and diffuser fitment
Correct PowerEnd alignment
Leak-free reassembly
Safe startup and priming
Proper system pressure and flow after installation
Improper installation may cause leaks, electrical hazards, poor pump performance, premature motor failure, or damage to the pump assembly.
Important Fitment Note
This is a PowerEnd kit, not a complete pump.
The pump housing, strainer pot, plumbing connections, and other external pump components are not included. If your pump housing is cracked, warped, leaking, or otherwise damaged, a complete pump replacement may be needed instead of a PowerEnd repair.
Technical Specifications
| Specification | Details |
|---|---|
| Brand | Pentair / PSD Kit |
| Kit Model | PSD1.5HPK |
| Product Type | Bolt-On PowerEnd Kit |
| Motor Type | TEFC Single Speed Motor |
| Horsepower | 1.5 HP |
| Voltage | 120/240V |
| Frequency | 60Hz |
| Speed | Single Speed |
| Included Motor | OEM Pentair TEFC Motor |
| Motor Warranty | 2-Year Manufacturer Warranty |
| Included Components | Motor, seal plate, impeller, diffuser, shaft seal, gaskets |
| Complete Pump Included | No |
| Pump Housing Included | No |
| Strainer Pot Included | No |
| Union Kit Included | No |
| Application | Compatible pool pump power-end replacement |
| Compatible Pump Style | Verify WhisperFlo / SuperFlo-style compatibility before ordering |
| Installation | Professional Installation Recommended |
| SKU | PSD1.5HPK |
| UPC / Barcode | Verify before publishing |
| Important Verification | Confirm impeller size and pump compatibility before publishing or installing |
Customer-Facing Q&A
Q: Is this a complete pool pump?
A: No. This is a PowerEnd kit. It includes the motor-side repair components, but it does not include the full pump housing, strainer pot, lid, basket, or plumbing connections.
Q: What is a PowerEnd kit used for?
A: A PowerEnd kit is used to replace the motor-side assembly of a compatible pump when the existing pump housing or wet end is still usable.
Q: Does this include the motor?
A: Yes. This kit includes an OEM Pentair 1.5 HP single speed TEFC motor.
Q: What voltage is the motor?
A: The included motor is rated for 120/240V, 60Hz operation.
Q: Does the motor include a warranty?
A: Yes. The motor includes a 2-year manufacturer warranty.
Q: Does this include the seal plate, diffuser, and impeller?
A: Yes. This kit is intended to include the main power-end repair components, including the seal plate, diffuser, impeller, shaft seal, and gaskets.
Q: Does this fit every Pentair pump?
A: No. Compatibility must be verified before ordering. Pump parts must match the pump housing, horsepower, impeller, seal plate, diffuser, and voltage requirements.
Q: Can I order this kit by horsepower only?
A: No. Horsepower alone is not enough to confirm fitment. Always verify your pump model and repair requirements before ordering.
Q: Does this include a new pump housing?
A: No. The pump housing or wet end is not included.
Q: Should I replace seals and gaskets during installation?
A: Yes. This kit includes key seals and gaskets, and proper seal replacement is important to help prevent leaks and protect the new motor.
Q: Can I install this myself?
A: Professional installation is recommended because this repair may involve electrical wiring, bonding, grounding, seal installation, and pump reassembly.
Q: What should I check before ordering?
A: Confirm that you need part number PSD1.5HPK, your pump housing is compatible, your system requires a 1.5 HP single speed TEFC PowerEnd, your voltage requirement matches 120/240V, 60Hz, and your installer has verified the correct impeller and fitment.