Product Overview
The Pentair IntelliPro VSF Drive Assembly with Keypad | 353141Z is a genuine Pentair replacement drive and keypad assembly designed for compatible Pentair IntelliPro VSF variable speed and flow pool pumps. This assembly is used when the original pump drive, keypad, or control interface has failed, become damaged, or is no longer operating properly.
The drive assembly is one of the most important electronic components on a variable speed pump. It controls pump operation, programming, speed/flow settings, and user interface functions. Replacing the drive assembly can help restore pump control when the motor and wet end are still serviceable.
This is a replacement drive assembly with keypad only. It is not a complete pump, motor, wet end, seal kit, or pump housing.
Ideal For
Pentair IntelliPro VSF pump repairs
Replacing a failed drive assembly
Replacing a damaged keypad or pump control interface
Variable speed and flow pump troubleshooting
Pool equipment repairs where the motor and wet end are still usable
Pool professionals servicing Pentair IntelliPro VSF pumps
Restoring pump programming and control functionality
What’s Included
Pentair IntelliPro VSF drive assembly
Integrated keypad / control interface
Factory-supplied replacement components included with manufacturer packaging
What’s Not Included
Complete pump
Pump motor
Pump wet end
Seal plate
Impeller
Diffuser
Mechanical shaft seal
Pump lid or basket
Pump housing / volute
Automation system
Communication cable unless supplied by manufacturer packaging
Installation labor
Additional repair parts not listed as included
Compatibility Guidance
The Pentair 353141Z Drive Assembly with Keypad is designed for compatible Pentair IntelliPro VSF pump models.
Before ordering, confirm the following:
You need part number 353141Z.
Your pump is a compatible Pentair IntelliPro VSF model.
Your pump issue has been diagnosed as a drive/keypad failure.
Your motor, wet end, impeller, diffuser, seals, and pump housing are still usable or will be repaired separately.
You need the drive assembly with keypad, not a complete pump or motor.
Your existing wiring, bonding, automation connection, and pump installation are in safe working condition.
Your installer has confirmed compatibility by pump model, serial number, and part number.
Do not order this part by pump series name alone. Pentair pump electronics are model-specific, and incorrect drive assemblies may not fit or operate correctly.
Confirm Before Ordering
Before purchasing, please verify:
You need the Pentair 353141Z replacement part.
Your pump is a compatible IntelliPro VSF pump.
Your original drive assembly or keypad is the failed component.
You are not trying to replace the motor, wet end, or complete pump.
Your pump has been inspected for water intrusion, wiring issues, electrical damage, or motor faults.
You understand additional parts may be required if the pump has other damage.
A qualified pool professional or electrician will complete installation if needed.
Key Features
Genuine Pentair replacement part
Part number 353141Z
Replacement drive assembly with keypad
Designed for compatible Pentair IntelliPro VSF pumps
Restores pump control and programming functions when properly diagnosed
Supports variable speed and flow pump operation on compatible models
Includes user keypad/control interface
OEM fit for compatible Pentair pump systems
Replacement electronic assembly only
Professional installation recommended
Benefits
The Pentair IntelliPro VSF Drive Assembly with Keypad 353141Z helps restore control functionality to compatible IntelliPro VSF pumps without replacing the entire pump. When the existing motor and wet end are still in good condition, replacing the failed drive assembly can be a practical repair option.
Because this is a genuine Pentair replacement component, it is designed to match compatible pump electronics and control functions. The included keypad allows users or technicians to access pump settings, schedules, speed/flow controls, and operating status once properly installed.
Recommended Use
Use the Pentair 353141Z when a compatible IntelliPro VSF pump has been diagnosed with a failed drive assembly, damaged keypad, display/control issue, or drive-related operational failure.
Before replacing the drive, inspect the pump for possible causes of failure such as water intrusion, electrical surge damage, incorrect voltage, loose wiring, automation communication issues, motor faults, or blocked ventilation.
Installation Notes
This replacement drive assembly should be installed by a qualified pool professional or licensed electrician. Pump drive replacement may involve electrical wiring, control wiring, bonding/grounding verification, drive mounting, keypad setup, programming, and startup testing.
Professional installation is recommended to ensure:
Correct part compatibility
Safe electrical disconnection and reconnection
Proper bonding and grounding verification
Correct drive installation
Proper keypad and control setup
Correct pump programming
Verification of voltage and electrical supply
Inspection for water intrusion or motor-related issues
Safe startup and operation after repair
Improper installation may cause electrical hazards, pump failure, drive damage, communication issues, or voided warranty coverage.
Important Diagnostic Note
Drive assembly failures can sometimes be caused by other issues, including electrical surges, improper voltage, water intrusion, failed motor components, poor ventilation, or wiring problems.
Replacing the drive without diagnosing the root cause may result in repeat failure. Always confirm the failure source before installing a new drive assembly.
Technical Specifications
| Specification | Details |
|---|---|
| Brand | Pentair |
| Model / Part Number | 353141Z |
| Product Type | Pump Drive Assembly |
| Included Interface | Keypad / Control Interface |
| Compatible Pump Series | Pentair IntelliPro VSF |
| Pump Type | Variable Speed and Flow Pump |
| Complete Pump Included | No |
| Motor Included | No |
| Wet End Included | No |
| Seal Kit Included | No |
| Application | IntelliPro VSF Pump Electronic Repair |
| Installation | Professional Installation Recommended |
| SKU | 353141Z |
| UPC / Barcode | 788379878740 |
Customer-Facing Q&A
Q: What is the Pentair 353141Z used for?
A: It is a replacement drive assembly with keypad for compatible Pentair IntelliPro VSF pumps.
Q: Is this a complete pump?
A: No. This is the replacement drive and keypad assembly only. It does not include the motor, wet end, or complete pump.
Q: Does this include the keypad?
A: Yes. This assembly includes the keypad/control interface.
Q: What pump series is this for?
A: This part is intended for compatible Pentair IntelliPro VSF variable speed and flow pumps.
Q: Will this fit every Pentair IntelliPro pump?
A: No. Compatibility must be confirmed by pump model, serial number, and required replacement part number.
Q: Can this fix a pump that will not turn on?
A: It may help if the drive assembly is the diagnosed failed component. However, power supply, wiring, motor, and other electrical issues should be checked first.
Q: Can this fix a damaged display or keypad?
A: Yes, if the issue is with the drive/keypad assembly and the rest of the pump is functioning correctly.
Q: Should I replace the drive myself?
A: Professional installation is recommended because this repair involves electrical components and pump programming.
Q: What should I check before ordering?
A: Confirm that you need part number 353141Z, that your pump is a compatible IntelliPro VSF model, and that the drive/keypad assembly has been properly diagnosed as the failed part.