Product Overview

The Raypak E3T Electric Spa Heater | 100-10000665 is a compact, high-performance electric heater designed for spas, hot tubs, and compatible pool heating applications. With 18kW electric output and approximately 61,419 BTU/hr, this heater provides dependable water heating without gas fuel or venting requirements.

Built with titanium heating elements and 316L stainless steel construction, the E3T is engineered for demanding water environments, including properly maintained saltwater systems. Its solid-state control design helps eliminate noisy contactors, while the digital control center displays set point, inlet/outlet temperatures, flow rate, and diagnostic alerts.

This Type P configuration requires 240V single-phase power and two 40A breakers, making it a professional-grade electric heating solution for installations where proper electrical capacity is available.

Ideal For

• Spas and hot tubs
• Small pool heating applications
• Electric pool and spa heating systems
• Installations without natural gas or propane access
• Saltwater pool and spa systems
• Equipment pads requiring compact heater sizing
• Replacing older electric spa heaters
• Customers wanting digital heater controls
• Professional pool and spa equipment installations
• Indoor or outdoor equipment areas where gas venting is not preferred

Key Features

• 18kW electric heating output — provides strong electric heating performance for compatible spa and pool applications.
• Approximately 61,419 BTU/hr — converts 18kW electric power into dependable heat output.
• Titanium heating elements — designed for durability in harsh pool and spa water environments.
• 316L stainless steel construction — marine-grade stainless steel body helps resist corrosion.
• 240V single-phase operation — designed for professional electrical installations with adequate service capacity.
• Type P breaker configuration — requires two 40A breakers for proper installation.
• Solid-state controls — reduces noisy mechanical contactor operation for quieter performance.
• Digital control center — displays set point, inlet temperature, outlet temperature, flow rate, and diagnostic alerts.
• Flow sensor technology — helps monitor water movement for safe and efficient operation.
• Power modulation — advanced design uses only the energy needed to maintain the desired temperature.
• 2" union connections — supports professional plumbing installation and easier service access.
• Compact size — easier to place in tight equipment areas and replacement installations.

Benefits

The Raypak E3T 18kW heater gives spa owners and pool professionals a compact electric heating option with advanced controls and corrosion-resistant materials. Because it runs on electricity, it does not require a gas line, propane tank, or gas venting system.

The titanium elements and 316L stainless steel construction make it a strong option for spas, saltwater systems, and demanding water conditions when chemistry is properly maintained. The digital display and built-in diagnostics also make operation and troubleshooting easier for service professionals.

For applications with sufficient electrical capacity, the E3T provides a clean, compact, and reliable way to heat spa water quickly and consistently.

Specifications

Included Components

• 1 × Raypak E3T 18kW electric heater
• Titanium heating element assembly
• Digital control center
• 2" union connection set
• Manufacturer-supplied installation documentation

Electrical breakers, wiring, disconnect, bonding materials, plumbing valves, additional fittings, GFCI protection where required, and installation labor are sold separately unless specifically included by the supplier.

Installation Notes

This heater must be installed by a qualified pool professional and licensed electrician. Proper installation requires correct electrical service, breaker sizing, wire sizing, bonding, grounding, GFCI protection where required, plumbing flow verification, and startup testing.

Before installation, confirm that the electrical service can support an 18kW, 240V single-phase heater requiring two 40A breakers. The system must provide at least 15 GPM of water flow through the heater.

Do not energize the heater without proper water flow. Water chemistry should be maintained within recommended ranges to protect the titanium elements, stainless steel body, and connected pool/spa equipment.

Customer-Facing Q&A

Q: What is the Raypak 100-10000665?
A: It is a Raypak E3T Electric 3-Series Titanium pool and spa heater rated at 18kW / approximately 61,419 BTU/hr.

Q: What is the SKU?
A: The SKU is 100-10000665.

Q: What is the UPC?
A: The UPC is 840891046090.

Q: What is the former part number?
A: This model was formerly listed as 017123.

Q: What is the distributor product number?
A: The distributor product number is RAY-15-0014.

Q: How many kilowatts is this heater?
A: This model is rated at 18kW.

Q: How many BTUs does it produce?
A: It produces approximately 61,419 BTU/hr.

Q: What voltage does it require?
A: It requires 240V single-phase electrical service.

Q: What breakers are required?
A: This Type P model requires two 40A breakers.

Q: What plumbing size does it use?
A: It comes standard with 2" union connections.

Q: What is the minimum flow rate?
A: The minimum flow rate is 15 GPM.

Q: Is this safe for saltwater systems?
A: It is built with titanium elements and 316L stainless steel, making it suitable for properly maintained saltwater pool and spa systems.

Q: Does this require gas or venting?
A: No. This is an electric heater and does not require natural gas, propane, or gas venting.

Q: Should this be professionally installed?
A: Yes. Professional pool and licensed electrical installation is required due to the heater’s electrical load, bonding, grounding, plumbing, and safety requirements.