Product Overview

The Pentair UltraTemp High Performance Pool Heat Pump 70 | 460930 is an energy-efficient electric pool heat pump designed to help maintain comfortable swimming temperatures in compatible residential pool systems. With a 75,000 BTU heating capacity, 230V single-phase power, and a durable almond cabinet, this model is built for outdoor pool equipment pad installation where efficient temperature maintenance is the goal.

Unlike a gas heater, the UltraTemp heat pump uses electricity to transfer heat from the surrounding air into the pool water. This makes it a strong choice for pool owners who want steady, efficient pool heating over time rather than fast, on-demand heat-up.

This model requires proper electrical service, plumbing flow, equipment pad clearance, and professional installation. Always confirm sizing, electrical requirements, water flow, and climate suitability before ordering.

Ideal For

Residential pool heating
Compatible in-ground pool systems
Pool owners wanting efficient electric pool heating
Customers looking to extend their swimming season
Outdoor pool equipment pad installations
Systems with compatible 230V single-phase electrical service
Pool owners who prefer electric heating over natural gas or propane
Pool professionals installing Pentair UltraTemp heat pumps

What’s Included

Pentair UltraTemp High Performance Pool Heat Pump 70
Factory-installed heat exchanger and internal heat pump components
Almond outdoor-rated cabinet
Digital control interface
Fan and compressor assembly
Manufacturer-supplied installation documentation and packaging

What’s Not Included

Installation labor
Electrical wiring materials
Breaker or disconnect
Plumbing fittings or unions unless included by manufacturer packaging
Pool cover
Automation system
Gas line or propane connection
External bypass plumbing
Condensate drain materials
Equipment pad or mounting base
Professional startup service
Additional accessories unless specifically supplied by manufacturer packaging

Compatibility Guidance

The Pentair UltraTemp 460930 is designed for compatible residential pool systems that require a 75K BTU electric heat pump and have the correct electrical, plumbing, flow, and installation setup.

Before ordering, confirm the following:

You need Pentair part number 460930.
Your pool size and heating expectations match a 75,000 BTU heat pump.
Your electrical service supports 230V, 60 Hz, single-phase operation.
Your electrical setup supports a 40 amp requirement.
Your equipment pad can safely support a unit weighing approximately 300 lbs.
Your plumbing layout can support proper water flow through the heat pump.
Your pump and filter system can provide the required flow rate.
Your equipment pad has adequate clearance for airflow and service access.
Your installation location allows proper condensate drainage.
Your climate is suitable for heat pump operation.
Your installer has confirmed sizing, electrical, plumbing, and equipment compatibility.

Heat pump performance depends on outdoor air temperature, humidity, wind exposure, pool volume, desired water temperature, plumbing flow, and whether a pool cover is used. Confirm sizing with a qualified pool professional before purchasing.

Confirm Before Ordering

Before purchasing, please verify:

You need the Pentair 460930 model.
You want the UltraTemp 70 heat pump.
Your pool system is properly sized for a 75K BTU heat pump.
Your site has compatible 230V single-phase electrical service.
Your installation supports the required 40 amp electrical rating.
Your equipment pad can support the unit’s approximate 300 lb weight.
Your plumbing and water flow are compatible with this heater.
Your equipment pad has proper clearance around the unit.
You understand this is an electric heat pump, not a gas heater.
Professional installation will be completed by a qualified pool professional or licensed electrician.

Key Features

Genuine Pentair UltraTemp high performance heat pump
Model 460930
UltraTemp 70 series heat pump
75,000 BTU heating capacity
230V, 60 Hz, single-phase electrical rating
40 amp electrical requirement
Almond cabinet finish
Approximate unit weight: 300 lbs
Efficient electric heat pump design
Digital control interface
Designed for outdoor pool equipment pad installation
No natural gas or propane line required
Helps maintain comfortable pool water temperatures
Professional installation recommended

Benefits

The Pentair UltraTemp High Performance Pool Heat Pump 70 helps pool owners enjoy warmer, more comfortable water using efficient heat pump technology. Instead of burning fuel, the unit transfers heat from the surrounding air into the pool water, making it a practical choice for many residential pool systems where electric heating is preferred.

The 75K BTU heating capacity is well suited for properly sized pools where steady temperature maintenance is more important than rapid heat-up. With the right pool size, flow rate, climate, and cover use, this heat pump can help extend the swimming season and improve overall pool comfort.

Because this model does not require natural gas or propane, it can be a strong option for installations where gas service is not available or where the customer prefers electric pool heating.

Heat Pump vs. Gas Heater

A heat pump uses electricity to transfer heat from the surrounding air into pool water. Heat pumps are often selected for efficient temperature maintenance and longer daily heating cycles.

A gas heater burns natural gas or propane to create heat quickly. Gas heaters are often selected for fast spa heat-up, occasional-use pools, or colder outdoor air conditions.

Choose the Pentair UltraTemp 460930 if your goal is efficient electric pool heating and your climate supports heat pump performance. If you need rapid heating or strong performance in colder air temperatures, a gas heater may be a better fit.

Recommended Use

Use the Pentair UltraTemp 70 | 460930 for compatible residential pool systems where a 75K BTU electric heat pump is properly sized for the pool volume, climate, desired water temperature, and heating schedule.

For best performance, use a pool cover when the pool is not in use. A pool cover helps reduce heat loss, especially overnight, and can improve heating efficiency and recovery time.

This model is best suited for maintaining comfortable pool temperatures over time rather than rapidly heating a cold pool or spa.

Installation Notes

This heat pump should be installed by a qualified pool professional and licensed electrician. Installation may involve electrical wiring, breaker sizing, bonding, grounding, plumbing connections, water-flow verification, equipment pad placement, condensate management, and startup testing.

Professional installation is recommended to ensure:

Correct electrical wiring and breaker sizing
Proper bonding and grounding
Correct plumbing connection and water flow
Adequate airflow clearance around the unit
Level equipment pad placement capable of supporting the unit weight
Proper condensate drainage
Safe startup and temperature programming
Compatibility with pumps, filters, automation, and pool controls
Verification that the system is heating and flowing correctly

Improper installation may cause poor heating performance, system errors, electrical hazards, water leaks, freeze damage, or voided warranty coverage.

Important Sizing Note

Heat pump performance depends on several factors, including pool size, outdoor air temperature, humidity, wind exposure, desired water temperature, plumbing flow, equipment placement, and whether a pool cover is used.

A 75K BTU heat pump may not perform the same in every climate or installation. Always confirm sizing and compatibility with a qualified pool professional before ordering.

Technical Specifications

Customer-Facing Q&A

Q: What size is this Pentair UltraTemp heat pump?
A: This model is the UltraTemp 70 and has a 75,000 BTU heating capacity.

Q: What voltage does this heat pump require?
A: It requires 230V, 60 Hz, single-phase electrical service.

Q: What amp rating is listed for this model?
A: This model is listed with a 40 amp electrical rating.

Q: What color is the cabinet?
A: The cabinet color is almond.

Q: How much does this unit weigh?
A: This model is listed at approximately 300 lbs.

Q: Is this a gas heater?
A: No. This is an electric heat pump. It transfers heat from the surrounding air into the pool water.

Q: Does this require natural gas or propane?
A: No. This model does not require a natural gas or propane connection.

Q: Is this good for fast spa heating?
A: Heat pumps are generally better for maintaining pool temperature over time. If you need rapid spa heating, a gas heater may be more appropriate.

Q: Does this include installation materials?
A: Basic manufacturer packaging is included, but electrical materials, plumbing fittings, breakers, disconnects, equipment pad materials, and labor are not included unless specifically stated.

Q: Should I use a pool cover with this heat pump?
A: Yes. A pool cover is strongly recommended because it helps reduce heat loss and can improve heating efficiency.

Q: Can I install this myself?
A: Professional installation is recommended. Heat pump installation requires electrical wiring, bonding, grounding, plumbing, water-flow verification, and startup testing.

Q: What should I check before ordering?
A: Confirm that you need part number 460930, that your pool is properly sized for a 75K BTU heat pump, and that your site supports 230V single-phase power with the required electrical capacity.