Product Overview
The Pentair 350122Z RS-485 Low Voltage Communication Cable is a genuine OEM replacement cable designed to provide reliable communication between compatible Pentair IntelliFlo® variable speed pumps and Pentair automation systems or communication interfaces. This 50-foot, two-conductor cable uses the industry-standard RS-485 communication protocol, allowing your pump to receive speed commands, scheduling information, and automation instructions from compatible Pentair control systems.
Whether you're replacing a damaged cable, upgrading an automation system, or installing a new IntelliFlo pump, the 350122Z ensures dependable communication and seamless integration. Unlike power wiring, this low-voltage cable is dedicated solely to data transmission, allowing the automation system to control pump speeds and operating modes without interrupting power to the pump.
Manufactured by Pentair to original equipment specifications, this cable provides the proper fit, connector, and signal quality required for long-term, reliable operation in residential and commercial pool applications.
Key Features
- Genuine Pentair OEM replacement part
- Part Number: 350122Z
- 50-foot (15.2 m) communication cable
- Two-conductor RS-485 low-voltage design
- Provides communication between IntelliFlo pumps and automation systems
- Factory-installed connector for direct pump connection
- 26 AWG cable construction
- Designed for dependable signal transmission
- Weather-resistant jacket for outdoor equipment installations
- Ideal for replacement or new automation installations
Benefits
Maintaining a reliable communication connection is essential for automation systems to properly control variable speed pumps. A damaged or worn communication cable can prevent remote scheduling, speed changes, freeze protection functions, and heater coordination.
Replacing the communication cable with a genuine Pentair 350122Z restores dependable data transmission while eliminating intermittent communication issues caused by damaged wiring or connectors. The generous 50-foot length allows flexible routing between equipment pads and automation panels without requiring splicing or extensions.
Because this is an OEM Pentair component, installation is straightforward and compatibility is maintained with supported Pentair automation products.
Specifications
| Specification | Details |
|---|---|
| Manufacturer | Pentair |
| Manufacturer Part Number | 350122Z |
| SKU | 350122Z |
| Product Type | RS-485 Communication Cable |
| Cable Length | 50 ft (15.2 m) |
| Communication Protocol | RS-485 |
| Conductors | 2 |
| Wire Size | 26 AWG |
| Application | IntelliFlo Pump Communication |
| Pump Connector | Factory Installed |
| Voltage | Low Voltage Communication Only |
| UPC / Barcode | 788379830069 |
Compatible Equipment
Compatible with many Pentair variable-speed pump families, including:
- IntelliFlo® VS
- IntelliFlo® VSF
- IntelliFlo® VF
- IntelliFlo® XF
- IntelliPro® VS
- IntelliPro® XF
- IntelliFlo® 2 VST
- Compatible Pentair automation systems including IntelliCenter®, EasyTouch®, IntelliTouch®, IntelliSync®, and IntelliComm® interfaces where applicable. Always verify compatibility with your specific pump model.
Installation Information
Disconnect power to all pool equipment before installation.
Connect the factory plug into the communication port on the side of the IntelliFlo pump. Route the cable to the automation panel, IntelliSync, IntelliComm, or compatible Pentair controller, then terminate the green and yellow RS-485 conductors according to the installation manual. Avoid routing alongside high-voltage wiring whenever possible to minimize electrical interference.
Professional installation is recommended for automation system wiring.
Confirm Before Ordering
Please verify:
- Your pump supports RS-485 communication.
- You need the Pentair 350122Z communication cable.
- Your automation system is compatible with IntelliFlo RS-485 communication.
- A 50-foot cable length meets your installation requirements.
- The communication issue is not caused by the automation controller or control board.
If you're unsure, send us your pump model number and automation system model, and we'll help verify compatibility before you order.
Warranty Information
This genuine Pentair replacement part is covered by the manufacturer's limited warranty against defects in materials and workmanship. Warranty does not cover improper installation, physical damage, misuse, unauthorized modifications, or damage resulting from incorrect wiring.
Customer Q&A
Does this cable supply power to the pump?
No. This is a low-voltage communication cable only. Pump power must be supplied separately.
Can this cable be used with Pentair automation systems?
Yes. It is designed to connect compatible IntelliFlo pumps with Pentair automation and communication systems using the RS-485 protocol.
Can I splice this cable if it's too short?
While it may be technically possible, Pentair recommends using the proper cable length whenever possible to maintain reliable communication.
Is this a genuine Pentair OEM part?
Yes. Part number 350122Z is an original Pentair replacement communication cable.