Product Overview
Replace the filter module in a compatible Sta-Rite System:2 modular D.E. filter with genuine Pentair part 27002-0036S. This 36-square-foot module is specified for the PLD70 and PLDE36 filter models. It replaces the internal filtration element while allowing you to keep a serviceable filter tank and other components.
A worn or damaged module can affect filtration even after cleaning. Replace it if the media is torn, its structure is damaged, or it no longer performs properly after maintenance. Match the part to the model label on your filter before ordering; the System:2 PLD models use different module sizes.
Key Features
- Genuine Pentair / Sta-Rite replacement filter module
- 36 sq. ft. of filter area
- Fits specified System:2 PLD70 and PLDE36 D.E. filters
- Replaces the internal module without replacing the complete filter
- Pentair part number 27002-0036S
Compatibility & Specifications
| Specification | Details |
|---|---|
| Manufacturer | Pentair / Sta-Rite |
| Part number | 27002-0036S |
| Product type | Modular D.E. filter replacement module |
| Filter series | System:2 |
| Compatible models | PLD70, PLDE36 |
| Filter area | 36 sq. ft. |
| Quantity | 1 filter module |
Check your model number: The PLD50 uses a different 30 sq. ft. module, part 27002-0030S. The PLDE48 also uses a different module, 27002-0048S. Do not select a replacement by tank appearance alone.
Installation & Maintenance
Turn off the pump and fully release pressure through the air relief valve before opening the filter. Remove the existing module and inspect the tank, O-ring, closure ring, and internal fittings. Install the replacement in the correct position, then reassemble and start the filter according to the instructions for your model.
This is a D.E. filter module. After cleaning or replacing the element, recharge the filter with the amount of D.E. specified in your filter’s manual. For the PLDE36, Pentair lists 5.4 lb of D.E. Use the instructions for your exact filter model when measuring and adding D.E.
Frequently Asked Questions
Does 27002-0036S fit the PLD70?
Yes. Pentair lists it as the PLD70 replacement filter module.
Does it fit the PLDE36?
Yes. Pentair also lists it for the System:2 PLDE36.
Will it fit a PLD50?
No. Pentair lists 27002-0030S for the PLD50.
Is this a complete filter?
No. This listing is for the internal replacement filter module only.
Is PLDE36 a System:3 filter?
No. The PLDE36 belongs to Pentair’s System:2 modular D.E. filter line.