Product Overview

The S1 Internal LF Gray Jet | 236252 is a low-flow internal pop-up cleaning head designed for compatible A&A Manufacturing / Pentair In-Floor Cleaning & Circulation pool systems.

This Style 1 low-flow head is commonly used in areas where a smaller, more controlled jet of water is needed. The 1/4" low-flow orifice helps direct water through the in-floor system while supporting balanced zone performance. As the system cycles, the head rotates through 12 positions to provide 360-degree cleaning coverage.

Finished in gray, this replacement head is a strong match for gray, dark gray, pebble, quartz, and neutral pool interiors.

Ideal For

• A&A / Pentair in-floor cleaning systems
• Style 1 pop-up head replacements
• Low-flow cleaning zones
• Step, bench, spa, and detail cleaning areas
• MagnaSweep and JetSweep style systems
• Replacing worn, stuck, cracked, or missing cleaning heads
• Balancing in-floor cleaning zone flow
• Gray or neutral pool interior finishes
• Professional pool service repairs
• In-floor cleaning system maintenance

Key Features

• Style 1 low-flow internal head — designed for compatible A&A / Pentair in-floor cleaning systems.
• 1/4" low-flow orifice — provides controlled water output for balanced cleaning zones.
• 12-position rotation — rotates through multiple fixed positions for 360-degree coverage.
• Gray finish — blends well with gray, dark gray, pebble, and neutral pool finishes.
• Direct replacement design — fits compatible Style 1 in-floor cleaning head applications.
• Useful for zone balancing — helps maintain proper flow distribution where lower output is required.
• Improves circulation — helps move treated, filtered water through the pool floor system.
• OEM-style fitment — used with Pentair In-Floor / formerly A&A Manufacturing systems.
• Serviceable pop-up design — removable with the correct Style 1 cleaning head tool.
• Professional-grade pool cleaner part — ideal for pool technicians and in-floor system repairs.

Benefits

The S1 Internal LF Gray Jet helps restore proper flow and cleaning action in compatible in-floor pool systems. When a pop-up head becomes stuck, damaged, clogged, or worn, the system may lose cleaning coverage and water distribution in that zone.

This low-flow version is useful when the system requires controlled output rather than a stronger high-flow jet. It helps maintain balanced water distribution across multiple cleaning heads, especially in areas such as steps, benches, spas, shelves, or zones where too much flow may disrupt system performance.

For service professionals, replacing the correct low-flow head helps keep the in-floor cleaning system operating according to its original design.

Specifications

Included Components

• 1 × S1 Style 1 Low Flow Internal Gray Jet

Cleaning head tool, body, collar, O-ring, in-floor valve parts, and additional system components are sold separately unless specifically included by the supplier.

Compatibility Notes

This cleaning head is intended for compatible Style 1 / S1 low-flow internal in-floor cleaning systems.

Common compatibility references include:

• A&A Manufacturing Style 1 systems
• Pentair In-Floor Cleaning & Circulation Style 1 systems
• MagnaSweep systems using Style 1 heads
• JetSweep systems using Style 1 heads
• Jet Clean / Quick Clean Style 1 applications
• Former part number 521407

Always confirm the existing head style, color, orifice type, flow type, body style, and part number before ordering. Low-flow and high-flow heads are not always interchangeable because the system may be hydraulically balanced for a specific orifice size.

Installation Notes

Turn off the pool pump and relieve pressure before servicing the in-floor cleaning system. Use the correct Style 1 cleaning head removal tool to remove the existing head from the floor body.

Inspect the body, O-ring, locking tabs, and surrounding floor fitting before installing the new head. Make sure the replacement head seats fully and locks into place. After installation, restart the system and confirm that the head pops up, rotates, and retracts properly.

If the head does not pop up or rotate correctly, inspect the in-floor valve, zone pressure, pump flow, filter condition, debris in the line, and cleaning head body.

Customer-Facing Q&A

Q: What is the S1 Internal LF Gray Jet used for?
A: It is used as a replacement low-flow internal pop-up jet for compatible A&A / Pentair in-floor pool cleaning systems.

Q: What is the SKU?
A: The SKU is 236252.

Q: What is the UPC / GTIN?
A: The UPC / GTIN is 818965013306.

Q: What does LF mean?
A: LF means Low Flow, indicating the head uses a smaller orifice for controlled water output.

Q: What size is the orifice?
A: This low-flow head uses a 1/4" orifice.

Q: What color is this cleaning head?
A: This version is gray / dark gray.

Q: What part number does this replace?
A: It is commonly associated with former part number 521407.

Q: Does this rotate?
A: Yes. The head rotates through 12 positions to provide 360-degree cleaning coverage.

Q: Can I replace a high-flow head with this low-flow head?
A: Only if the system design calls for a low-flow head. High-flow and low-flow heads have different orifice sizes and may affect zone performance if swapped incorrectly.

Q: Does this include the removal tool?
A: No. The Style 1 cleaning head tool is sold separately unless specifically included.

Q: Is this a genuine Pentair / A&A part?
A: It is listed under Pentair In-Floor, formerly A&A Manufacturing, for compatible Style 1 in-floor systems.