Product Overview
The Hayward TigerShark Robotic Pool Cleaner | RC9950CUB is a professional-quality robotic cleaner designed for residential in-ground swimming pools up to 20' x 40'. Using intelligent microprocessor-based technology, the TigerShark automatically navigates the pool while brushing, scrubbing, vacuuming, and filtering the floor, walls, coves, and waterline.
Unlike pressure-side or suction-side cleaners, the TigerShark operates independently from the pool's circulation system. No booster pump, dedicated cleaner line, or connection to the pool filter is required. Simply connect the power supply to a properly protected 115V outlet, place the cleaner in the pool, and start the cleaning cycle.
Key Features
Complete Pool Coverage
Designed to clean:
- Pool floors
- Walls
- Coves
- Waterline
Intelligent Robotic Navigation
The onboard microprocessor calculates an efficient cleaning pattern to provide thorough coverage of compatible in-ground swimming pools.
Powerful Onboard Vacuum
An integrated pump provides strong vacuum performance for collecting dirt, sand, leaves, and other pool debris.
Independent Filtration
The TigerShark collects debris in its own reinforced cartridge filtration system rather than sending debris through the pool pump and filter.
Easy-Clean Cartridge Filters
Simply remove the filter cartridges from the cleaner and rinse them with a garden hose after use.
Energy-Efficient 24V Motor
The external power supply converts standard 115 VAC, 60 Hz input power to 24V DC for efficient low-voltage cleaner operation.
55-Foot Floating Cord
Provides sufficient reach for compatible residential pools up to approximately 20' x 40'.
Benefits
- Fully robotic pool cleaning
- Cleans floor, walls, coves, and waterline
- Designed for pools up to 20' x 40'
- 55-foot floating power cord
- Intelligent microprocessor navigation
- Powerful onboard vacuum pump
- Dual easy-clean cartridge filtration
- No booster pump required
- No pool hoses required
- No connection to pool filtration required
- Energy-efficient 24V cleaner motor
- Compatible with multiple pool surfaces
- Easy plug-and-clean operation
- Genuine Hayward pool-cleaning equipment
Specifications
| Specification | Details |
|---|---|
| Manufacturer | Hayward |
| Series | TigerShark |
| Manufacturer Part Number | RC9950CUB |
| Product Type | Robotic Pool Cleaner |
| Application | In-Ground Swimming Pool |
| Maximum Pool Size | Up to 20' x 40' |
| Cleaning Coverage | Floor, Walls, Coves & Waterline |
| Cleaning Cycle | 3 Hours |
| Cord Length | 55 ft |
| Power Supply Input | 115 VAC |
| Frequency | 60 Hz |
| Power Supply Output | 24V DC |
| Filter Type | Cartridge |
| Number of Filter Elements | 2 |
| Remote Control | No |
| Booster Pump Required | No |
| Pool Filtration Connection Required | No |
| Cleaner Weight | Approx. 21.5 lb |
| Packaged Weight | Approx. 42 lb |
| Shipping Dimensions | Approx. 19.7" x 19.7" x 21" |
| Warranty | 1 Year |
| Pool360 Product Number | AQV-20-1000 |
| SKU | RC9950CUB |
| UPC / Barcode | 610377312561 |
Compatible Pool Surfaces
The TigerShark is designed for use on compatible:
- Gunite
- Vinyl
- Fiberglass
- Pebble
- Tile
Note: Certain tile surfaces may require an optional foam roller for proper traction.
What's Included
- Hayward TigerShark RC9950CUB Robotic Pool Cleaner
- 55' Floating Power Cord
- External Power Supply
- Two Reinforced Cartridge Filter Elements
- Integrated Brushes and Drive System
- Operating Instructions
Caddy cart is not included unless specifically stated and is available separately.
Installation & Operation
The TigerShark does not require permanent installation or connection to the pool plumbing system.
For operation:
- Position the power supply the required safe distance from the pool.
- Connect the power supply to a properly protected 115V GFCI outlet.
- Connect the cleaner's floating cable.
- Place the cleaner completely into the pool and allow trapped air to escape.
- Start the cleaning cycle.
- After cleaning, remove and rinse the cartridge filter elements.
Always follow Hayward's electrical and operating instructions.
Confirm Before Ordering
Verify that you require:
- Hayward RC9950CUB
- Standard TigerShark model
- 55' cord
- 115 VAC / 60 Hz power supply
- Pool size up to 20' x 40'
This is the standard TigerShark RC9950CUB.
It should not be confused with the TigerShark QC RC9990CUB, which adds a 90-minute Quick Clean cycle, or the TigerShark Plus models equipped with remote-control capability.
Warranty Information
The Hayward RC9950CUB TigerShark carries a 1-year limited manufacturer warranty for qualifying residential applications, subject to Hayward's current warranty terms, authorized sales requirements, proper operation, and exclusions.
Customer Q&A
Q: Does the Hayward TigerShark require a booster pump?
No. The TigerShark is completely robotic and operates independently from the pool's pump and filtration system.
Q: How long is the power cord?
The RC9950CUB includes a 55-foot floating cord.
Q: What size pool can it clean?
Hayward rates the TigerShark for in-ground pools up to approximately 20' x 40'.
Q: Does it clean the walls?
Yes. It is designed to clean the floor, walls, coves, and waterline.
Q: How long is the cleaning cycle?
The standard RC9950CUB uses a 3-hour cleaning cycle.
Q: Does this model have the 90-minute Quick Clean feature?
No. The 90-minute Quick Clean cycle is available on the TigerShark QC model.
Q: Does it have a remote control?
No. RC9950CUB is the standard automatic TigerShark and does not include a remote control.
Q: What type of filter does it use?
It uses two removable cartridge filter elements that can be rinsed clean with a garden hose.
Q: Can it clean a vinyl pool?
Yes. Hayward lists the TigerShark for compatible gunite, vinyl, fiberglass, pebble, and tile pools.
Q: Is the caddy included?
No. The Hayward RC99385 Premium Caddy Cart is an optional accessory and is sold separately.