Product Overview
The Pentair 355008S Replacement Motor is a genuine Pentair square flange pool and spa pump motor designed for compatible Pentair pump systems. This motor features 3/4 HP performance, single-speed operation, single-phase power, and 115/208-230V electrical compatibility, depending on the installation setup.
Built with a 56Y square flange frame, this motor mounts directly to compatible pump seal plates and wet ends. It is commonly referenced for select Pentair WhisperFlo, SuperFlo, and related pump applications when the motor horsepower, voltage, service factor, frame type, and impeller sizing match the existing pump setup.
The 355008S is commonly cross-referenced with 071313S and is often used with WhisperFlo models WFE-2, WFE-3, and WFE-24 when compatibility is confirmed.
Ideal For
- Replacing failed Pentair pool pump motors
- Select Pentair WhisperFlo pump repairs
- Select Pentair SuperFlo pump repairs
- 3/4 HP pump motor replacement applications
- 115V, 208V, or 230V compatible installations
- Single-speed pump motor repairs
- Square flange pump wet ends
- Residential pool and spa circulation systems
- Pool pump rebuilds
- Professional pool service repairs
Key Features
- Genuine Pentair replacement motor — designed for compatible Pentair pool and spa pump applications.
- 3/4 HP motor performance — supports dependable circulation for properly matched pump systems.
- Single-speed operation — direct replacement for compatible 1-speed motor setups.
- Single-phase electrical design — suitable for standard residential pool equipment installations.
- 115/208-230V compatibility — supports multiple wiring configurations when installed correctly.
- 56Y square flange frame — common pool pump frame that attaches to compatible pump seal plates.
- Almond finish — matches many Pentair replacement motor and pump assemblies.
- 60 Hz operation — built for standard North American electrical frequency.
- Compatible with select Pentair pumps — commonly referenced for WhisperFlo and SuperFlo pump applications.
- Energy-efficient replacement reference — commonly listed as an energy-efficient square flange motor.
- Reliable pump repair option — replaces the motor without replacing the complete pump when the wet end is serviceable.
- Professional service part — ideal for motor replacements, seal service, and wet-end repairs.
Benefits
The Pentair 355008S motor helps restore pump operation when the existing motor has failed, overheated, become noisy, or stopped running. If the pump housing, seal plate, impeller, diffuser, and plumbing are still in good condition, replacing only the motor can be a cost-effective repair.
The 3/4 HP, single-speed, 56Y square flange design makes this motor suitable for specific Pentair pump configurations. Correct motor matching is important because horsepower, service factor, voltage, frame type, and impeller size all need to match the pump wet end.
For pool professionals, the 355008S is a practical OEM replacement motor for compatible Pentair WhisperFlo and SuperFlo service jobs.
Specifications
| Specification | Details |
|---|---|
| Product Name | Pentair 355008S Replacement Motor |
| Brand | Pentair |
| Part Number | 355008S |
| Replacement Reference | 071313S |
| Additional Cross References | BPA449, EB661A, ASB661A, 355008SZ |
| SKU | 355008S |
| UPC / GTIN | 788379665432 |
| Product Type | Pool and spa pump replacement motor |
| Motor Type | Energy-efficient pool pump motor |
| Horsepower | 3/4 HP / 0.75 HP |
| Voltage | 115/208-230V |
| Phase | Single phase |
| Frequency | 60 Hz |
| Speed | 1-speed |
| RPM Reference | 3450 RPM |
| Frame Type | Square flange |
| Common Frame Reference | 56Y square flange |
| Color | Almond |
| Compatible Pump Series | Select Pentair WhisperFlo and SuperFlo pumps |
| Common WhisperFlo Compatibility | WFE-2, WFE-3, WFE-24 |
| Common SuperFlo Compatibility | Select SuperFlo applications when verified by model and motor label |
| Complete Pump Included | No |
| Pump Wet End Included | No |
| Impeller Included | No |
| Diffuser Included | No |
| Shaft Seal Included | No |
| Seal Plate Included | No |
| Equipment Category | Pool pump replacement motors |
| Professional Installation Recommended | Yes |
| Sold As | Each |
Included Components
- 1 × Pentair 355008S 3/4 HP square flange replacement motor
Pump housing, seal plate, impeller, diffuser, shaft seal, gaskets, O-rings, wiring, conduit, bonding wire, unions, pump base, and installation labor are sold separately unless specifically included by the supplier.
Compatibility Notes
The Pentair 355008S is designed for compatible pool and spa pump assemblies requiring a 3/4 HP, single-phase, single-speed, square flange motor.
Common compatibility references include:
- Pentair WhisperFlo High Performance Pump WFE-2
- Pentair WhisperFlo High Performance Pump WFE-3
- Pentair WhisperFlo High Performance Pump WFE-24
- Select Pentair SuperFlo pump applications
- Replacement applications using 071313S
- Cross references BPA449, EB661A, and ASB661A
Always confirm the existing pump model, motor label, horsepower, service factor, voltage, frame, impeller size, seal plate style, and wiring requirements before ordering. Motor appearance alone is not enough to confirm fitment.
Installation Notes
This motor should be installed by a qualified pool professional or licensed electrician. Turn off all power at the breaker before servicing the pump.
When replacing a pump motor, inspect the shaft seal, seal plate, diffuser, impeller, gaskets, O-rings, wiring, conduit, and bonding connection. It is strongly recommended to replace the shaft seal any time the motor is replaced to help prevent water from leaking into the new motor.
After installation, verify correct voltage, bonding, grounding, motor rotation, pump priming, pressure, flow, and leak-free operation. Incorrect voltage, improper wiring, or mismatched impeller sizing can damage the motor.
Customer-Facing Q&A
Q: What is the Pentair 355008S?
A: It is a 3/4 HP square flange replacement motor for compatible Pentair WhisperFlo and SuperFlo pool pumps.
Q: What is the SKU?
A: The SKU is 355008S.
Q: What part number does this replace?
A: It is commonly used as a replacement for 071313S.
Q: What is the UPC / GTIN?
A: 788379665432
Q: What horsepower is this motor?
A: This motor is rated at 3/4 HP / 0.75 HP.
Q: What voltage does it require?
A: It is commonly listed for 115/208-230V operation.
Q: Is this motor single phase?
A: Yes. This is a single-phase motor.
Q: Is this a variable-speed motor?
A: No. This is a single-speed replacement motor.
Q: What frame style is this motor?
A: This is a square flange motor, commonly referenced as a 56Y square flange style.
Q: What color is the motor?
A: This motor is almond.
Q: What pumps does this fit?
A: It is commonly referenced for Pentair WhisperFlo WFE-2, WFE-3, and WFE-24, plus select SuperFlo applications when verified by model and motor label.
Q: Does this include the complete pump?
A: No. This listing is for the motor only.
Q: Does this include the shaft seal?
A: No. The shaft seal is sold separately unless specifically included by the supplier.
Q: Should I replace the shaft seal when replacing the motor?
A: Yes. Replacing the shaft seal is strongly recommended whenever the motor is replaced.
Q: Should this be professionally installed?
A: Yes. Professional installation is recommended to ensure correct wiring, bonding, seal replacement, pump alignment, and safe operation.