Product Overview
The Hayward AquaRite Pro Main Circuit Board | GLX-PCB-AR-PRO is a genuine OEM replacement main printed circuit board designed specifically for compatible Hayward and Goldline AquaRite Pro salt chlorine generator systems.
The main PCB is the central electronic control board within the AquaRite Pro power center. Replacing a failed GLX-PCB-AR-PRO can restore the system's primary control functions without requiring replacement of the complete AquaRite Pro control unit.
Important Compatibility Notice: The GLX-PCB-AR-PRO is specifically designed for AquaRite Pro systems. It is not the replacement board for standard AquaRite, ProLogic, or AquaLogic systems.
Key Features
Genuine Hayward OEM Replacement
Factory replacement electronic component manufactured specifically for compatible AquaRite Pro salt chlorination systems.
AquaRite Pro Main PCB
Serves as the primary control circuit board inside the AquaRite Pro control unit.
Direct Replacement Design
Designed to replace a failed original AquaRite Pro PCB while allowing compatible existing components to remain in service.
For AquaRite Pro Systems
Hayward identifies GLX-PCB-AR-PRO as the Main PCB for the AquaRite Pro platform.
Separate Display Assembly
The AquaRite Pro membrane keypad/display and dead-front assembly are separate components and are not included with the main PCB.
Benefits
- Genuine Hayward OEM replacement
- Designed specifically for AquaRite Pro
- Restores central salt-system electronic control
- Allows board-level repair instead of replacing the complete control unit
- Direct replacement for compatible original AquaRite Pro boards
- Designed for professional pool equipment repair
- Compatible with existing AquaRite Pro system components when properly matched
Specifications
| Specification | Details |
|---|---|
| Manufacturer | Hayward |
| Manufacturer Part Number | GLX-PCB-AR-PRO |
| Product Type | Main Printed Circuit Board |
| Component Type | Salt Chlorinator Main Control PCB |
| Compatible System | Hayward AquaRite Pro |
| Application | Pool Salt Chlorination |
| Board Only | Yes |
| Complete Control Unit Included | No |
| Display / Membrane Keypad Included | No |
| Salt Cell Included | No |
| OEM / Aftermarket | Genuine Hayward OEM |
| Product Weight | Approx. 0.8 lb |
| Shipping Dimensions | Approx. 9.73" x 7.7" x 6.89" |
| Pool360 Product Number | GLD-451-1022 |
| Warranty | 6-Month General Warranty |
| SKU | GLX-PCB-AR-PRO |
| UPC / Barcode | 761418009879 |
What's Included
- Hayward GLX-PCB-AR-PRO Main Circuit Board
Unless specifically stated otherwise, this listing does not include:
- AquaRite Pro control enclosure
- Display / membrane keypad
- Dead-front panel
- Transformer
- TurboCell salt cell
- Flow switch
- Sense & Dispense components
- Complete AquaRite Pro system
Related AquaRite Pro Components
Hayward identifies the following primary AquaRite Pro service components:
- GLX-PCB-AR-PRO – Main PCB
- GLX-CTL-AR-PRO – Complete AquaRite Pro Control Unit
- GLX-AR-PRO-MEM – Display, Membrane Keypad & Dead Front
If the problem is limited to the display or keypad, replacing the main PCB may not be necessary.
Important Compatibility Information
The GLX-PCB-AR-PRO is specifically intended for AquaRite Pro systems.
Do not confuse it with:
- GLX-PCB-RITE – Standard AquaRite Main PCB
- GLX-PCB-PRO – ProLogic / AquaPlus Main PCB
- GLX-PCB-MAIN – Older AquaLogic Main PCB
- GLXS3PCB – AquaRite S3 Printed Circuit Board Kit
These electronic boards are not automatically interchangeable.
Installation Information
Replacing the AquaRite Pro main circuit board requires working inside an electrical control enclosure and should be performed by a qualified pool professional or electrician familiar with Hayward salt chlorination equipment.
Before servicing:
- Completely disconnect electrical power to the AquaRite Pro.
- Verify that the system is de-energized.
- Document all existing wire and connector locations.
- Disconnect the original PCB carefully.
- Install the replacement GLX-PCB-AR-PRO.
- Reconnect all wiring and harnesses to their correct locations.
- Inspect connections before restoring power.
- Confirm proper system operation after installation.
Electronic components should never be connected, disconnected, or serviced while energized.
Confirm Before Ordering
Verify all of the following before purchasing:
- Hayward part number GLX-PCB-AR-PRO
- Existing system is AquaRite Pro
- Existing main PCB has been properly diagnosed
- Display/keypad is functioning or has been separately diagnosed
- Transformer and power supply are operating correctly
- Salt cell and flow switch have been checked when applicable
Do not order this board solely because the salt system is displaying an error. Cell failure, flow-switch issues, transformer problems, wiring faults, or other components can produce symptoms that may be mistaken for a failed main PCB.
⚠️ Important Purchase Notice
This product is intended to be purchased and installed by pool professionals. Please verify the exact system and required part number before ordering.
Returns are not accepted on this or any electronic equipment once installed, connected, energized, or used. Shipping damage will be covered and must be reported promptly.
Warranty Information
Pool360 currently lists the GLX-PCB-AR-PRO with a 6-month general warranty.
Warranty coverage is subject to Hayward's current replacement-part warranty terms, authorized seller requirements, proper installation, and applicable exclusions.
Damage caused by incorrect wiring, power surges, lightning, water intrusion, improper voltage, or installation in an incompatible system may not qualify for warranty coverage.
Customer Q&A
Q: What system does GLX-PCB-AR-PRO fit?
It is the main replacement circuit board for compatible Hayward AquaRite Pro salt chlorine generator systems.
Q: Is this the board for a standard AquaRite system?
No. Standard AquaRite systems use GLX-PCB-RITE. GLX-PCB-AR-PRO is specifically for AquaRite Pro.
Q: Does this fit Hayward ProLogic?
No. ProLogic systems use GLX-PCB-PRO, not GLX-PCB-AR-PRO.
Q: Is the display included?
No. Hayward lists the AquaRite Pro display, membrane keypad, and dead-front assembly separately as GLX-AR-PRO-MEM.
Q: Is this the complete AquaRite Pro control unit?
No. This listing is for the main PCB only. The complete AquaRite Pro control unit is GLX-CTL-AR-PRO.
Q: Does the salt cell come with this board?
No. The TurboCell is sold separately.
Q: Is this a genuine Hayward part?
Yes. GLX-PCB-AR-PRO is a genuine Hayward OEM replacement main PCB.