Pool equipment is not one-size-fits-all. We help homeowners, pool pros, and owner-builders choose the right pumps, filters, heaters, salt systems, automation, lights, valves, and replacement parts.
Get help confirming compatibility before you buy expensive equipment or replacement parts.
Pick up pool equipment and supplies from our Henderson, Nevada location.
We ship pool equipment, parts, and freight items across the United States.
Shop trusted equipment from Pentair, Hayward, Jandy, Raypak, Waterway, and more.
Restore proper operation to your Pentair A&A in-floor pool cleaning system with the Pentair 230069 / A&A 582928 Complete 6-Port Low Profile T-Valve Rebuild Gear Kit.
Designed specifically for compatible 2-inch, 6-port low-profile A&A T-Valve water valves, this genuine replacement kit contains the primary internal components needed to rebuild a worn valve actuator without replacing the complete valve housing.
As an in-floor cleaning system operates, the water valve continuously cycles water between different cleaning zones. Over time, the internal gear assembly, impeller, cam, shaft, washers, and seals can wear, causing the valve to stop advancing correctly or distribute water inefficiently.
The 230069 rebuild kit replaces these critical internal components to help restore smooth valve sequencing, proper zone rotation, and consistent water distribution throughout the in-floor cleaning system.
This kit is the current Pentair part number 230069 and corresponds to A&A Manufacturing part number 582928. It also replaces previous A&A kit 540277.
The Pentair A&A 230069 / 582928 rebuild kit includes:
This kit replaces the primary internal operating components of the valve but does not include the T-valves themselves.
| Specification | Details |
|---|---|
| Brand | Pentair / A&A |
| Pentair Part Number | 230069 |
| A&A Part Number | 582928 |
| Previous Part Number | 540277 |
| Product Type | Water Valve Rebuild / Retrofit Kit |
| Application | In-Floor Pool Cleaning System |
| Valve Style | Low Profile T-Valve |
| Number of Ports | 6-Port |
| Valve Base / Plumbing Size | 2 Inch |
| Gear Plate | Included |
| Impeller | Included |
| Center Shaft | Included |
| T-Valve Cam | Included |
| Body O-Ring | Included |
| Anti-Friction Washers | Included |
| T-Valves | Not Included |
| UPC | 818965012002 |
| Manufacturer | Pentair |
The 230069 / 582928 rebuild kit is used with compatible A&A 2" Low Profile 6-Port T-Valve water valves found in several A&A in-floor cleaning systems, including:
Compatibility depends on the water valve configuration, not simply the name of the in-floor cleaning system.
Before ordering, verify that your existing valve is a:
2" Low Profile
6-Port
T-Valve Style
A&A / Pentair Water Valve
This kit is specifically designed for the 2-inch valve base.
Do not order the 230069 based solely on appearance.
Pentair identifies 230148 / A&A 582936 as the 6-Port Low Profile T-Valve Kit for the 1½-inch configuration.
This is also important.
The 230069 / 582928 kit is intended for the low-profile valve configuration that uses T-Valves / T-Valve clips.
If the bottom of your valve uses large acrylic ball valves rather than T-Valves, a different replacement kit is required.
Always inspect your existing valve before ordering.
Customers replacing an older A&A gear assembly may notice that the new gear plate does not look exactly like the component being removed.
This is normal.
The updated replacement gear plate utilizes a newer 10-gear design instead of the previous 5-gear configuration. The updated design was introduced to promote more even wear across the gear assembly.
The different appearance does not necessarily indicate that the wrong part was ordered.
An in-floor pool cleaning system divides the pool into several cleaning zones.
The water valve directs pressurized water to one zone at a time. As water moves through the valve, the internal impeller drives the gear mechanism. The gears gradually rotate the cam, which changes which T-Valves are open or closed.
This sequencing directs water to different groups of in-floor cleaning heads around the pool.
When the internal gears or other components wear out, the valve may stop sequencing correctly, which can significantly reduce cleaning performance.
Consider inspecting the valve if you experience:
These symptoms can have multiple causes, so verify water pressure, pump operation, filters, plumbing, cleaning heads, and valve condition before replacing components.
If the valve housing, lid, and T-Valves remain in usable condition, replacing the internal gear mechanism can be much more economical than replacing the entire water valve.
The Pentair 230069 provides the primary components involved in the valve's mechanical sequencing system, making it an excellent repair option for an otherwise serviceable valve.
Benefits include:
A&A Manufacturing has long been associated with in-floor pool cleaning and circulation systems. These products are now supported within Pentair's in-floor cleaning product line.
For this kit:
A&A Item Number: 582928
Pentair Item Number: 230069
Previous Kit Number: 540277
These numbers may appear differently in older parts diagrams, invoices, valve documentation, or online listings, but they refer to this replacement application.
Before servicing the water valve:
Professional installation is recommended if you are unfamiliar with A&A water valves or in-floor cleaning systems.
Yes. 582928 is the A&A item number and 230069 is the corresponding Pentair item number for the 2" 6-Port Low Profile T-Valve Kit.
The kit replaces previous A&A kit 540277.
This kit is intended for the 2-inch Low Profile 6-Port T-Valve configuration.
Pentair lists 230148 / 582936 separately for the 1½" 6-Port Low Profile T-Valve configuration. Verify your valve size before ordering.
No. This is an internal rebuild kit, not a complete water valve assembly.
No. The kit replaces the primary internal actuator components but does not include the T-Valves.
Yes. A factory-assembled gear plate is included.
Yes. The impeller is included.
Pentair/A&A updated the gear plate design. The newer assembly may use 10 gears rather than the previous 5-gear configuration, which helps promote more even gear wear.
A worn gear assembly, cam, shaft, or impeller can cause a valve to stop cycling. This rebuild kit replaces those primary mechanical components. However, improper pressure, damaged T-Valves, blocked plumbing, or other system issues can produce similar symptoms.
Confirm that your valve is a 2-inch, Low Profile, 6-Port T-Valve-style A&A/Pentair water valve. Checking the existing valve design and original part numbers before ordering is highly recommended.
