Product Overview

The Jandy AquaLink RS Spa Side Remote | 7441 is a genuine Jandy 4-function spa-side control designed for convenient operation of selected pool and spa features from the spa area or nearby outdoor location.

This remote is made for use with compatible Jandy AquaLink RS and AquaLink PDA automation systems. It allows users to control up to four assigned functions, such as spa mode, jets, lights, heater control, water features, or other programmed equipment depending on the automation setup.

The 7441 remote includes a 100-foot cable, a white weather-resistant housing, and a compact 2-3/4" diameter face. It is designed for above-water installation in the spa tile line, decking, or other suitable outdoor location and is commonly referenced for 1" to 1-1/2" installation fittings. Jandy states this 4-function spa-side remote is weather resistant and designed for installation above water level with AquaLink RS or AquaLink PDA systems.

⚠️ Important Purchase Notice

This product is intended to be purchased and installed by pool professionals. Product support is not provided to homeowners.

Returns are not accepted on this or any electronic equipment.

Damages to product from shipping will be covered and must be reported promptly.

By purchasing this item, you agree to the terms above.

Ideal For

• Jandy AquaLink RS automation systems
• Jandy AquaLink PDA systems
• Pool and spa combination systems
• Spa-side equipment control
• Replacing worn or failed spa-side remotes
• Adding remote control near a spa
• Controlling spa jets, lights, heater, and programmed features
• Outdoor pool automation access points
• New pool and spa construction
• Pool automation remodels
• Professional Jandy automation installations

Key Features

• 4-function spa-side control — allows control of four programmed AquaLink functions from the spa area.
• 100-foot cable included — supports longer wiring runs from the spa-side location to the automation control system.
• White weather-resistant housing — designed for outdoor pool and spa environments.
• AquaLink RS compatible — works with any model AquaLink RS system when properly installed and programmed.
• AquaLink PDA compatible — also designed for use with compatible AquaLink PDA systems.
• Above-water installation design — intended for spa tile line, decking, or other outdoor above-water mounting locations.
• Compact 2-3/4" diameter face — provides a clean, low-profile control point near the spa.
• Supports multiple remotes — up to three spa-side remotes can be installed on one AquaLink RS system when properly configured.
• Custom function labeling — supports labeling of assigned functions for easier user operation.
• Convenient spa control — reduces the need to walk back to the main control panel or indoor control interface.
• OEM Jandy automation accessory — designed for proper integration with supported Jandy automation systems.

Benefits

The Jandy 7441 Spa Side Remote gives users convenient control of key pool and spa features directly from the spa area. Once programmed through the AquaLink automation system, the remote can activate assigned functions such as spa mode, jets, lighting, heating, or other connected equipment.

Its weather-resistant design allows it to be installed outdoors above the waterline, making it practical for spa tile lines, decking, or nearby control locations. The 100-foot cord gives installers flexibility when routing wiring back to the automation control system.

For pool professionals, the 7441 is a reliable OEM Jandy remote option for automation upgrades, replacement jobs, and spa-side convenience control.

Specifications

Included Components

• 1 × Jandy AquaLink RS 4-function spa-side remote, white
• 1 × attached 100-foot cable
• Precut custom labels / function labels, depending on packaging
• Manufacturer-supplied installation documentation

Automation power center, AquaLink RS system, AquaLink PDA system, conduit, fittings, wall sleeve, sealant, junction materials, additional remotes, and installation labor are sold separately unless specifically included by the supplier.

Compatibility Notes

This remote is designed for compatible Jandy AquaLink RS and AquaLink PDA automation systems.

Common compatibility references include:

• Any model Jandy AquaLink RS automation system
• Jandy AquaLink PDA systems
• Pool and spa systems requiring 4-function spa-side control
• Outdoor above-water remote control installations
• Replacement applications requiring Jandy part number 7441

Always confirm automation system model, control board compatibility, wiring route, mounting location, and desired programmed functions before ordering.

Installation Notes

This spa-side remote must be installed by a qualified pool professional familiar with Jandy AquaLink automation systems. The remote is designed for installation above water level in the spa tile line, decking, or another approved outdoor location.

Before installation, confirm wiring distance, automation compatibility, mounting size, conduit path, and programmed function requirements. After installation, the AquaLink system must be configured so each button controls the desired function.

Because this is an electronic automation accessory, improper wiring, water intrusion, or incorrect mounting can damage the remote or automation system.

Customer-Facing Q&A

Q: What is the Jandy 7441?
A: It is a Jandy AquaLink RS 4-function spa-side remote with a white weather-resistant housing and 100-foot cord.

Q: What is the SKU?
A: The SKU is 7441.

Q: What is the UPC / GTIN?
A: The UPC / GTIN is 052337003063.

Q: What is the distributor product number?
A: The distributor product number is JDY-30-6434.

Q: How many functions can it control?
A: It can control 4 programmed functions through a compatible AquaLink automation system.

Q: How long is the cord?
A: This model includes a 100-foot cord.

Q: What color is the remote?
A: This model is white.

Q: Is it weather resistant?
A: Yes. It is designed as a weather-resistant outdoor spa-side remote.

Q: What systems is it compatible with?
A: It is designed for compatible Jandy AquaLink RS and AquaLink PDA automation systems.

Q: Can it be installed underwater?
A: No. It is designed for above-water installation in the spa tile line, decking, or another approved outdoor location.

Q: Can more than one spa-side remote be installed?
A: Yes. Up to three spa-side remotes can be installed on one AquaLink RS system when properly configured.

Q: Can a homeowner install this remote?
A: No. This product is intended to be purchased and installed by pool professionals.

Q: Are returns accepted on this item?
A: No. Returns are not accepted on this or any electronic equipment.