Product Overview

The Jandy Compool Conversion Kit to AquaLink RS Pool/Spa 8 with iAquaLink | IQ-COMP-RSPS8 is a professional automation upgrade kit designed to convert compatible older Compool® pool and spa control systems to a modern Jandy AquaLink RS Pool/Spa 8 automation platform.

This conversion kit allows pool owners to keep much of the existing Compool infrastructure while upgrading to AquaLink RS control and iAquaLink smart connectivity. Once installed and configured, compatible pool and spa equipment can be controlled from a smartphone, tablet, or web-connected device through iAquaLink.

The IQ-COMP-RSPS8 is commonly used to upgrade legacy Compool 100, 1000P, 2000, 3000/T, 3400/T, 3600/T, 3800/T, Swim Master, and Time Master systems to AquaLink RS Pool/Spa 8 functionality. It includes the iAquaLink web-connect device, power center bezel with PC board, plate adapters, and temperature sensors.

⚠️ Important Purchase Notice

This product is intended to be purchased and installed by pool professionals. Product support is not provided to homeowners.

Returns are not accepted on this or any electronic equipment.

Damages to product from shipping will be covered and must be reported promptly.

By purchasing this item, you agree to the terms above.

Ideal For

• Upgrading older Compool automation systems
• Pool and spa combination systems
• Converting Compool controls to AquaLink RS Pool/Spa 8
• Adding iAquaLink smart-device control
• Modernizing older pool equipment pads
• Reusing compatible existing power center infrastructure
• Controlling pumps, heaters, lights, valves, and auxiliary equipment
• Replacing outdated indoor Compool control interfaces
• Professional pool automation upgrades
• Service technicians converting legacy automation systems

Key Features

• Compool-to-AquaLink conversion kit — upgrades compatible legacy Compool systems to Jandy AquaLink RS Pool/Spa 8 automation.
• iAquaLink included — enables compatible smartphone, tablet, and web-based control after proper setup.
• Pool/Spa 8 configuration — supports AquaLink RS pool/spa automation functionality with expanded equipment control.
• Designed for legacy Compool systems — commonly supports Compool 100, 1000P, 2000, 3000/T, 3400/T, 3600/T, 3800/T, Swim Master, and Time Master systems.
• Power center bezel with PC board included — provides the updated AquaLink RS control board interface for conversion.
• Plate adapters included — supports installation into compatible existing Compool equipment setups.
• Temperature sensors included — supports air and water temperature monitoring for automation and heater control.
• No full power center replacement required in many conversions — intended to modernize compatible existing Compool installations.
• Control multiple equipment functions — supports compatible pumps, heaters, lights, valves, water features, and auxiliary circuits.
• Professional-grade Jandy automation platform — designed for reliable pool/spa automation and connected control.

Benefits

The Jandy IQ-COMP-RSPS8 gives pool owners a practical way to modernize older Compool automation without starting from scratch. Instead of replacing the entire system, this kit converts compatible legacy controls to AquaLink RS Pool/Spa 8 functionality while adding the convenience of iAquaLink.

With iAquaLink, users can manage pool and spa operation from compatible smart devices. This allows easier access to spa mode, heater control, lighting, scheduling, auxiliary equipment, and system status from nearly anywhere with supported internet access.

For pool professionals, this kit provides a cleaner upgrade path for older Compool systems, helping bring aging automation equipment up to modern Jandy control standards while reusing compatible wiring and equipment where possible.

Specifications

Included Components

• 1 × iAquaLink web-connect device
• 1 × power center bezel with PC board
• Plate adapters
• Temperature sensors
• Manufacturer-supplied installation components and documentation

Smartphone, tablet, computer, Wi-Fi/network equipment, additional relays, actuators, breakers, electrical wiring, bonding materials, conduit, pumps, heaters, lights, valves, and installation labor are sold separately unless specifically included by the supplier.

Compatibility Notes

This kit is designed to convert compatible legacy Compool automation systems to Jandy AquaLink RS Pool/Spa 8 control.

Common compatible legacy system references include:

• Compool 100
• Compool 1000P
• Compool 2000
• Compool 3000/T
• Compool 3400/T
• Compool 3600/T
• Compool 3800/T
• Swim Master
• Time Master

Always confirm the existing system model, power center condition, relay requirements, actuator wiring, sensor wiring, heater control wiring, and desired auxiliary functions before ordering. Not every older or modified Compool installation will convert the same way.

Installation Notes

This conversion kit must be installed by a qualified pool automation professional or licensed electrician familiar with Compool and Jandy AquaLink RS systems.

Before installation, verify the existing Compool system model and confirm that the power center, relays, actuators, wiring, sensors, breakers, and connected equipment are compatible and serviceable. The system must be configured correctly after installation for pool/spa operation, heater control, valve control, lighting, schedules, and auxiliary circuits.

iAquaLink setup requires compatible internet/network access and user-supplied smart devices or computers. Final system setup, labeling, programming, and testing should be completed by the installer.

Customer-Facing Q&A

Q: What is the Jandy IQ-COMP-RSPS8?
A: It is a Jandy conversion kit that upgrades compatible legacy Compool automation systems to AquaLink RS Pool/Spa 8 with iAquaLink smart control.

Q: What is the SKU?
A: The SKU is IQ-COMP-RSPS8.

Q: What is the UPC / GTIN?
A: The UPC / GTIN is 052337062220 / 0052337062220.

Q: Does this include iAquaLink?
A: Yes. The kit includes the iAquaLink web-connect device.

Q: What systems does this convert?
A: It commonly converts legacy Compool 100, 1000P, 2000, 3000/T, 3400/T, 3600/T, 3800/T, Swim Master, and Time Master systems to AquaLink RS Pool/Spa 8.

Q: Is this for pool-only or pool/spa systems?
A: This kit is for Pool/Spa 8 automation configurations.

Q: What is included in the kit?
A: The kit includes the iAquaLink web-connect device, power center bezel with PC board, plate adapters, and temperature sensors.

Q: Can this control my heater, lights, and valves?
A: Yes, when properly installed and configured, it can control compatible heaters, lights, valves, pumps, water features, and auxiliary equipment.

Q: Does this include a smartphone or tablet?
A: No. The web-connected device used for control is supplied by the user.

Q: Does this include new pumps, heaters, or lights?
A: No. This is an automation conversion kit only. Pool equipment is sold separately unless specifically included.

Q: Can a homeowner install this kit?
A: No. This product is intended to be purchased and installed by pool professionals.

Q: Are returns accepted on this item?
A: No. Returns are not accepted on this or any electronic equipment.