Product Overview
The Jandy Infinite WaterColors LED Lights Controller | IWCLC300W is the required power and control center for compatible Jandy Infinite WaterColors RGBW pool and spa lights. This controller combines a 300W low-voltage transformer with advanced lighting control communication, allowing compatible Infinite WaterColors lights to be controlled through Jandy AquaLink RS automation.
Designed for Jandy’s next-generation RGBW lighting platform, the IWCLC300W provides 14VAC output through an isolating transformer and communicates with compatible AquaLink RS systems through RS485. When properly configured, it allows users to access custom color selection, preset colors, light shows, dimming, zones, and app-based lighting control through iAquaLink.
This controller is required for Infinite WaterColors lights and should not be substituted with a standard pool light transformer.
⚠️ Important Purchase Notice
This product is intended to be purchased and installed by pool professionals. Product support is not provided to homeowners.
Returns are not accepted on this or any electronic equipment.
Damages to product from shipping will be covered and must be reported promptly.
By purchasing this item, you agree to the terms above.
Ideal For
- Jandy Infinite WaterColors RGBW pool lights
- Jandy Infinite WaterColors RGBW spa lights
- Infinite WaterColors nicheless LED lights
- Infinite WaterColors niched LED lighting systems
- RGBW pool and spa lighting upgrades
- AquaLink RS automation systems
- iAquaLink app-based lighting control
- New pool construction
- Pool remodels and lighting upgrades
- Replacing or adding the required Infinite WaterColors controller
- Professional pool lighting and automation installations
Key Features
- 300W integrated transformer — supplies power for compatible Jandy Infinite WaterColors LED lights.
- Required Infinite WaterColors controller — designed specifically for Jandy RGBW Infinite WaterColors lighting systems.
- 14VAC low-voltage output — provides the required low-voltage power for compatible Infinite WaterColors fixtures.
- RS485 communication — connects to compatible Jandy AquaLink RS automation systems.
- AquaLink RS compatibility — requires AquaLink RS revision Y or later for proper system operation.
- iAquaLink app control support — enables lighting control from compatible smart devices when paired with supported automation.
- RGBW lighting support — controls Jandy Infinite WaterColors lights with color and dedicated white capability.
- Custom color palette control — allows expanded color selection beyond traditional preset-only pool lighting.
- Preset colors and light shows — supports 10 preset colors and 5 light shows when properly configured.
- Dimming capability — supports adjustable light intensity with compatible Infinite WaterColors systems.
- Zone control support — allows compatible lights to be grouped and controlled by lighting zone.
- Dedicated pool/spa lighting control — engineered for permanent pool and spa lighting installations.
Benefits
The Jandy IWCLC300W gives pool owners the full benefit of the Infinite WaterColors lighting platform. Instead of being limited to cycling through preset colors with a wall switch, users can choose colors, dim lights, run shows, and manage lighting zones through compatible Jandy automation.
For pool professionals, this controller simplifies Infinite WaterColors installations by combining transformer power and communication control in one dedicated unit. It is the correct control solution for compatible Jandy RGBW lights and helps ensure proper voltage, communication, and lighting functionality.
Because Infinite WaterColors lights require this specific controller, using the IWCLC300W helps avoid compatibility issues that may occur with standard transformers or unsupported control systems.
Specifications
| Specification | Details |
|---|---|
| Product Name | Jandy Infinite WaterColors LED Lights Controller, 300W Transformer |
| Brand | Jandy |
| Manufacturer | Fluidra / Jandy |
| Part Number | IWCLC300W |
| SKU | IWCLC300W |
| Distributor Product Number | JDY-30-0759 |
| UPC | 052337082020 |
| Product Type | LED light controller / transformer |
| Lighting Series | Infinite WaterColors |
| Compatible Light Type | Jandy Infinite WaterColors RGBW LED lights |
| Transformer Capacity | 300W |
| Output Voltage | 14VAC |
| Transformer Type | Isolating low-voltage pool light transformer |
| Communication Type | RS485 |
| Automation Compatibility | Jandy AquaLink RS |
| Required Automation Revision | AquaLink RS revision Y or later |
| App Compatibility | iAquaLink with compatible AquaLink RS setup |
| Voice Control Compatibility | Alexa-compatible through supported iAquaLink / AquaLink setup |
| Lighting Color Type | RGBW Infinite WaterColors |
| Preset Colors | 10 preset colors with compatible setup |
| Light Shows | 5 light shows with compatible setup |
| Dimming Support | Yes, with compatible Infinite WaterColors system |
| Zone Control | Yes, with compatible Infinite WaterColors system |
| Standard Transformer Substitute | No |
| Installation Type | Pool/spa lighting controller installation |
| Application | Pool and spa lighting control |
| Equipment Category | Pool and spa lighting automation |
| Professional Installation Required | Yes |
| Returns | Not accepted on electronic equipment |
| Sold As | Each |
Included Components
- 1 × Jandy Infinite WaterColors LED Lights Controller
- 1 × integrated 300W transformer
- RS485 communication interface
- Low-voltage lighting output terminals
- Manufacturer-supplied installation documentation
Infinite WaterColors lights, AquaLink RS automation system, iAquaLink hardware if not already installed, electrical conduit, breakers, junction boxes, bonding materials, wiring, wall controls, and installation labor are sold separately unless specifically included by the supplier.
Compatibility Notes
This controller is designed specifically for compatible Jandy Infinite WaterColors LED lighting systems.
Common compatibility references include:
- Jandy Infinite WaterColors nicheless LED lights
- Jandy Infinite WaterColors niched pool and spa LED lights
- Jandy Infinite WaterColors RGBW laminar and water feature lighting where applicable
- Jandy AquaLink RS automation systems
- AquaLink RS revision Y or later
- iAquaLink app control when properly configured
This controller is not a generic transformer replacement. Infinite WaterColors lights are designed to operate with the Jandy Infinite WaterColors LED Light Controller.
Installation Notes
This controller must be installed by a qualified pool professional or licensed electrician. Pool and spa lighting equipment involves electrical work around water and must comply with manufacturer instructions, bonding requirements, grounding requirements, transformer installation requirements, junction box placement, conduit requirements, and all applicable electrical codes.
Before installation, verify that the lighting system uses compatible Jandy Infinite WaterColors fixtures and that the automation system is AquaLink RS revision Y or later. The total connected lighting load must not exceed the controller’s 300W capacity.
Do not connect Infinite WaterColors fixtures to an unsupported transformer or non-compatible lighting controller. Improper wiring or incompatible control equipment can prevent operation or damage the lighting system.
Customer-Facing Q&A
Q: What is the Jandy IWCLC300W?
A: It is the Jandy Infinite WaterColors LED Lights Controller with an integrated 300W transformer and RS485 communication for compatible AquaLink RS automation systems.
Q: What is the SKU?
A: The SKU is IWCLC300W.
Q: What is the UPC?
A: 052337082020
Q: What is the distributor product number?
A: The distributor product number is JDY-30-0759.
Q: What lights does this controller work with?
A: It is designed for compatible Jandy Infinite WaterColors RGBW pool and spa LED lights.
Q: Is this a regular pool light transformer?
A: No. This is a dedicated Infinite WaterColors controller with a 300W transformer and communication control.
Q: What is the transformer capacity?
A: The integrated transformer is rated at 300W.
Q: What voltage does it output?
A: It supplies 14VAC output for compatible Infinite WaterColors lights.
Q: Does this connect to AquaLink RS?
A: Yes. It communicates through RS485 with compatible Jandy AquaLink RS automation systems.
Q: What AquaLink version is required?
A: AquaLink RS revision Y or later is required for proper compatibility.
Q: Does this work with iAquaLink?
A: Yes, when connected to a compatible AquaLink RS and iAquaLink setup.
Q: Does this support dimming and color zones?
A: Yes. Dimming and zone control are supported when the lighting system is properly configured.
Q: Can a homeowner install this controller?
A: No. This product is intended to be purchased and installed by pool professionals.
Q: Are returns accepted on this item?
A: No. Returns are not accepted on this or any electronic equipment.