Product Overview

The Pentair IntelliBrite® Architectural Series White Pool Light 602140 is a complete underwater LED fixture designed to provide bright, evenly distributed white illumination for compatible in-ground swimming pools. This model operates on 12 volts, includes a 50-foot factory-installed cord, and produces light comparable to a traditional 500-watt incandescent pool light while consuming approximately 31 watts.

Pentair’s Architectural Series uses refined optics and a high-performance lens to project light more evenly throughout the pool. The improved beam pattern helps reduce bright hot spots and dark areas, creating a cleaner and more consistent nighttime appearance. Pentair states that the Architectural Series provides up to 60% more brightness compared with previous-generation models while improving energy efficiency.

The 602140 is a single-color white fixture. It does not change colors or provide programmed light shows. It is well suited for homeowners, commercial facilities, and pool professionals seeking a bright white LED upgrade for a compatible full-size wet niche.

Key Features

• Genuine Pentair complete LED pool-light fixture
• IntelliBrite Architectural Series design
• Bright white LED illumination
• 500-watt incandescent-equivalent output
• Uses approximately 31 watts
• Operates on 12V low-voltage power
• Includes a 50-foot factory-installed cord
• Refined optics for more even light distribution
• Stainless-steel face ring
• Energy-efficient LED technology
• Factory-sealed light assembly
• Suitable for compatible full-size wet niches
• Designed for residential and commercial in-ground pools

Benefits

The IntelliBrite Architectural Series provides a substantial reduction in energy use compared with traditional incandescent pool lighting. Its LED light source also produces less heat and typically requires less routine maintenance because there is no conventional incandescent bulb to replace.

The improved optical design spreads light more evenly across the pool, helping enhance nighttime visibility and the appearance of the pool interior. This can be especially beneficial in larger pools where older lights may create uneven lighting or shadowed areas.

The 50-foot cord supports installations where the approved junction box or transformer is located within the appropriate distance from the pool niche. Because the cord is factory installed, it must remain continuous and should not be spliced inside the conduit or underwater.

Specifications

Installation Information

Disconnect all electrical power before servicing or installing the light. This fixture requires an approved 12V pool-light transformer that is properly sized for the connected lighting load.

Route the factory cord continuously through the niche conduit to an approved junction box or transformer connection. Do not cut, splice, or repair the cord. Pentair states that if the external cord becomes damaged, the complete fixture must be replaced.

Leave sufficient cord stored behind the fixture so the light can be raised to the pool deck for future service. Installation must comply with applicable electrical, grounding, bonding, and pool-lighting codes.

Professional installation by a licensed electrician or qualified pool professional is strongly recommended.

Confirm Before Ordering

Please verify:

• Your lighting system operates on 12V.
• You need a 50-foot cord.
• Your pool uses a compatible full-size wet niche.
• You want a white-only light rather than a color-changing fixture.
• You need a complete sealed fixture, not a replacement bulb.
• Your transformer can support the light’s electrical requirements.
• Your niche mounting screw and lower retaining tab are compatible.

Warranty Information

The Pentair 602140 is covered by the applicable Pentair limited manufacturer warranty when purchased and installed according to Pentair requirements. Warranty coverage may require professional installation and proof of purchase.

Coverage does not include incorrect voltage, improper transformer selection, modified or damaged cords, installation errors, chemical damage, water intrusion caused by improper installation, or use in an incompatible niche.