Product Overview
The Hayward SPX3000B is a genuine OEM replacement diffuser designed for Hayward Super IIĀ® pool pumps rated at 2.5 HP and 3.0 HP. The diffuser directs water from the impeller into the volute, maximizing hydraulic efficiency and maintaining proper pump performance. A worn or cracked diffuser can reduce flow, lower filter pressure, create excessive noise, and decrease overall pump efficiency.
Important: This diffuser is intended for Super II pumps manufactured in 1989 and earlier. If your pump was manufactured in 1990 or later, verify compatibility before ordering, as a different diffuser may be required.
Key Features
Genuine Hayward OEM replacement part
Designed for Super II 2.5 HP and 3 HP pool pumps
Fits pre-1990 Super II pump models
Heavy-duty corrosion-resistant molded thermoplastic construction
Restores proper water flow and pump efficiency
Precision fit for reliable performance
Direct replacement for damaged or worn diffusers
Easy installation during impeller or seal replacement
Benefits
Restores original hydraulic performance
Improves water circulation
Helps eliminate reduced flow caused by diffuser wear
Reduces pump noise and turbulence
Extends pump service life
OEM quality ensures proper fit and durability
Specifications
| Specification | Details |
|---|---|
| Manufacturer | Hayward |
| Part Number | SPX3000B |
| SKU | HAYSPX3000B |
| Product Type | Pump Diffuser |
| Pump Series | Hayward Super II |
| Compatible Horsepower | 2.5 HP & 3.0 HP |
| Compatibility | Super II Pumps Manufactured 1989 & Earlier |
| Material | High-strength Thermoplastic |
| Diffuser Base OD | Approximately 6-5/8" |
| Diffuser Eye OD | Approximately 2-1/8" |
| Diffuser Height | Approximately 3-1/2" |
| Mounting Style | 5-Tab Design |
| UPC | 610377041157* |
| Weight | 0.555 lb |
| Dimensions (Shipping) | 5.8 x 5.8 x 4.41 in. |
*UPC commonly associated with this OEM part. Verify with your inventory if required.
Warranty & Compatibility
Installation Information
- Turn off all electrical power before servicing the pump.
- Inspect the diffuser gasket/O-ring and replace if worn.
- Check the impeller and shaft seal while the pump is disassembled.
- Ensure all mounting tabs fully engage before reassembling the pump housing.
Professional installation is recommended.
Confirm Before Ordering
Please verify:
- Your pump is a Hayward Super II.
- Your pump was manufactured in 1989 or earlier.
- Your motor is 2.5 HP or 3 HP.
- Your existing diffuser matches the 5-tab configuration.
If you're unsure, send us your pump model number or a photo of the pump label and we'll help verify the correct replacement.
Warranty Information
This genuine Hayward replacement part is covered by the manufacturer's limited warranty against defects in materials and workmanship. Warranty does not cover improper installation, misuse, freeze damage, or normal wear.
Customer-Facing Q&A
Q: Will this fit all Super II pumps?
A: No. It is specifically designed for 2.5 HP and 3 HP Super II pumps manufactured before 1990.
Q: Is this an OEM Hayward part?
A: Yes, SPX3000B is a genuine Hayward replacement diffuser.
Q: Should I replace anything else while installing this diffuser?
A: It's recommended to inspect or replace the shaft seal, diffuser gasket, and impeller if they show signs of wear.
Hayward Super II Pump Diffuser 2-1/2 to 3HP | SPX3000B
| Specification | Details |
|---|---|
| Manufacturer | Hayward |
| Part Number | SPX3000B |
| SKU | HAYSPX3000B |
| Product Type | Pump Diffuser |
| Pump Series | Hayward Super II |
| Compatible Horsepower | 2.5 HP & 3.0 HP |
| Compatibility | Super II Pumps Manufactured 1989 & Earlier |
| Material | High-strength Thermoplastic |
| Diffuser Base OD | Approximately 6-5/8" |
| Diffuser Eye OD | Approximately 2-1/8" |
| Diffuser Height | Approximately 3-1/2" |
| Mounting Style | 5-Tab Design |
| UPC | 610377041157* |
| Weight | 0.555 lb |
| Dimensions (Shipping) | 5.8 x 5.8 x 4.41 in. |
More Hayward Super Pump & Super II Parts
Shop all Hayward Super Pump & Super II Parts →-
Aladdin GO-KIT2 for Hayward Super II Pump 3000 Series | AEQGOKIT2
-
Hayward Super II Pump Basket | SPX3000M
-
Hayward Super Pump 1HP Drive Train Upgrade Kit | SPX2607CKIT
-
Hayward Super Pump 1.1 Total HP Pool Pump, High Efficiency | W3SP2607X10
-
Hayward Super II Pump 1HP Impeller | SPX3010C
-
Hayward Super Pump VS Variable-Speed Pool Pump, 1.65 HP, 230V | W3SP2603VSP
-
Hayward Super Pump Standard Efficiency Medium Head Up Rated ā 1 HP, 115/230 V
-
Hayward Super Pump 0.75 Total HP Pool Pump, High Efficiency | W3SP2605X7