Product Overview

The J&J Electronics PureWhite LED Spa Light 21102 is a complete underwater LED fixture designed to provide bright, cool-white illumination for compatible in-ground spas. This model operates on 120 volts, includes a 150-foot factory-installed cord, and delivers lighting comparable to a traditional 100-watt incandescent spa light while consuming only 13 watts.

The PureWhite S1W fixture produces approximately 500 lumens with a crisp 6500K cool-white color temperature. Its bright white output enhances the appearance of spa water, improves nighttime visibility, and creates a clean, modern look around the spa area.

This product is a complete sealed wet-niche fixture rather than a replacement bulb. It features a stainless-steel trim ring, compact fixture depth, and a permanently attached power cord. The compact housing helps installers see and align the lower niche catch from the spa deck during installation.

PureWhite LED fixtures are designed as energy-efficient alternatives to traditional incandescent spa lights. Hayward states that the PureWhite line can use up to 90% less energy and provide an operating life of up to approximately 50,000 hours compared with incandescent lighting.

Key Features

• Complete PureWhite underwater LED spa-light fixture
• 120V electrical operation
• 150-foot factory-installed power cord
• Approximately 13 watts of actual energy use
• Comparable to a 100-watt incandescent spa light
• Approximately 500-lumen light output
• Crisp 6500K cool-white illumination
• Stainless-steel trim ring
• Compact fixture depth
• Designed for compatible wet niches
• Single-color white operation
• Suitable for residential and commercial spas
• Rated for up to approximately 50,000 operating hours

Benefits

The PureWhite 21102 delivers dependable spa illumination while using significantly less electricity than a conventional 100-watt incandescent fixture. Its reduced power consumption lowers the electrical load placed on the lighting circuit and may reduce long-term operating costs.

The 6500K cool-white color provides a bright, clear appearance that can make spa water look cleaner and more inviting. The dedicated white LEDs eliminate the need for color-show programming or specialized lighting controls.

Its 150-foot cord is ideal for installations where the approved junction box is located farther from the spa. Because the cord is factory installed, it provides a continuous sealed connection when routed and installed correctly.

The long-life LED engine also reduces the frequency of underwater lighting maintenance compared with traditional incandescent bulbs.

Specifications

Hayward identifies the 21102 as a 120V PureWhite S1W spa fixture with a 150-foot cord, 13-watt power rating, 500-lumen output, stainless-steel trim, three-year parts warranty, and one-year labor warranty.

Installation Information

Disconnect all electrical power before installing or servicing the spa light. Confirm that the existing lighting circuit operates on 120 volts and that the wet niche, conduit, junction box, grounding, bonding, and circuit protection meet applicable electrical codes.

Route the complete 150-foot factory cord continuously through the niche conduit to an approved junction box. Do not cut, splice, shorten, or modify the cord underwater or inside the conduit.

Leave sufficient cord stored behind the fixture so the light can be lifted safely onto the spa deck for future service. The fixture must remain submerged during normal operation for proper cooling.

Installation must be completed by a licensed electrician or qualified pool professional.

Confirm Before Ordering

Verify the following:

• Your spa-lighting circuit operates on 120V.
• You require a 150-foot factory cord.
• Your spa uses a compatible wet niche.
• You want a single cool-white LED light.
• You need a complete sealed fixture rather than a replacement bulb.
• A 100-watt-equivalent output is appropriate for your spa.
• The niche mounting screw and lower retaining catch are compatible.

Warranty Information

The J&J Electronics PureWhite 21102 includes a three-year limited parts warranty and a one-year labor warranty, subject to Hayward’s current written warranty and installation requirements.

Warranty coverage does not include incorrect voltage, incompatible niches, modified cords, improper installation, chemical damage, physical damage, dry operation, or water intrusion caused by installation or servicing errors.

Customer Q&A

Is this actually a 100-watt LED light?
No. It consumes approximately 13 watts while producing illumination comparable to a traditional 100-watt incandescent spa light.

Does this light change colors?
No. The 21102 produces one 6500K cool-white color.

Is the 150-foot cord included?
Yes. The fixture includes a factory-installed 150-foot cord.

Is this a replacement bulb?
No. It is a complete sealed underwater LED spa-light fixture.