Product Overview

The Aiper Scuba P1 Cordless Robotic Pool Cleaner, Model E1P-US, provides automatic floor, wall, and waterline cleaning for residential in-ground swimming pools up to approximately 1,600 square feet. Its fully cordless design eliminates floating power cables, extension cords, booster pumps, and suction hoses, making setup and daily operation simple.

The Scuba P1 uses WavePath™ Navigation Technology to follow organized cleaning routes instead of moving randomly around the pool. It uses separate movement patterns for pool floors and walls to improve coverage while reducing unnecessary overlap.

Powerful suction rated at approximately 3,960 gallons per hour helps collect leaves, dirt, sand, pollen, and other common pool debris. The replaceable MicroMesh™ filtration system is designed to capture both larger debris and fine particles that may pass through standard cleaner baskets.

A full battery charge provides up to approximately 150 minutes of cleaning time, making the Scuba P1 suitable for many medium and large residential pools. Recharge time is approximately three hours under normal conditions.

Key Features

• Completely cordless robotic pool cleaner
• Cleans floors, walls, and the waterline
• Designed for in-ground pools up to 1,600 square feet
• WavePath Navigation Technology
• Approximately 3,960 GPH suction capacity
• Up to 150 minutes of runtime
• Approximately three-hour recharge time
• Replaceable MicroMesh ultra-fine filter
• Dynamic silicone roller brushes
• LED status indicators
• No hoses or booster pump required
• Independent of the pool filtration system
• Easy-access removable filter basket
• One-button operation

Benefits

The cordless design allows the cleaner to move throughout the pool without becoming tangled in a floating cable. It also keeps the pool deck free from a continuously connected power supply while the cleaner is operating.

Because the Scuba P1 operates independently from the pool pump and filter, it does not reduce skimmer suction or place additional debris into the primary filtration system. Dirt and debris are collected directly inside the robot’s removable filter box.

Its wall-climbing capability allows the cleaner to move beyond the pool floor and scrub vertical surfaces and the waterline. The silicone brushes help loosen attached dirt and algae while the high-flow suction draws debris into the filter.

Specifications

Operating Information

Fully charge the cleaner before its first use. Place it into the pool and allow trapped air to escape before releasing it. The cleaner will begin its selected cycle and automatically navigate the pool.

After cleaning, remove the unit using the handle or supplied retrieval method. Do not lift it by a brush, wheel, or charging-port cover.

Open the filter compartment, remove the basket, and rinse it with clean water after each cycle. Regular filter cleaning helps maintain suction and prevents fine debris from restricting water flow.

Charge the cleaner only when it is completely dry and away from the pool. Never use the charger outdoors in wet conditions or operate the cleaner while swimmers are in the water.

Confirm Before Ordering

Verify the following:

• Your pool is an in-ground residential pool.
• The cleaning area does not exceed approximately 1,600 square feet.
• You need floor, wall, and waterline cleaning.
• Your pool surface and shape are compatible with a wall-climbing robotic cleaner.
• You have a dry, protected location for charging.
• You understand that runtime varies with pool shape, surface, temperature, and cleaning conditions.

Warranty Information

The Aiper Scuba P1 is covered by Aiper’s applicable limited manufacturer warranty when purchased, operated, and maintained according to current warranty terms.

Coverage does not include normal wear, neglected filter maintenance, improper charging, water intrusion caused by an unsecured charging-port cover, battery misuse, chemical damage, impact damage, unauthorized repairs, or operation outside the approved pool conditions. Current warranty terms should be reviewed at the time of purchase.

Customer Q&A

Does the Scuba P1 require a cord while cleaning?
No. It operates from an internal rechargeable battery and is completely cordless during use.

What areas of the pool does it clean?
It is designed to clean the pool floor, walls, and waterline.

Does it connect to the pool pump?
No. It operates independently and collects debris in its own filter box.

How long does it run?
A full charge provides up to approximately 150 minutes of cleaning time, depending on operating conditions.