⚠️ Important Purchase Notice

This product is intended to be purchased and installed by pool professionals. Product support is not provided to homeowners.

Returns are not accepted on this or any electronic equipment.

Damages to product from shipping will be covered and must be reported promptly.

To prevent possible damage during transit, we strongly recommend selecting 2-Day Air or Next Day Air shipping at checkout.

By purchasing this item, you agree to the terms above.

Product Overview

The Jandy ePump 3.8 HP Variable Speed Pump | VSSHP3802A is a professional-grade variable speed pool pump designed for high-performance circulation in compatible residential pool and spa systems. With a 3.8 HP motor, 230V single-phase electrical requirement, and 2 AUX relays, this pump is built for installations where strong flow capability and efficient variable speed operation are needed.

This model is supplied without a controller, making it ideal for systems where a compatible Jandy automation system or separate control setup is already installed or specified by the pool professional.

Because this pump contains electronic components and must be matched to the correct plumbing, electrical, automation, and equipment requirements, it should be selected and installed only by qualified pool professionals.

Ideal For

Pool professionals installing Jandy variable speed pump systems
Residential pool and spa circulation systems
High-performance pump upgrades
Compatible Jandy automation installations
Systems requiring a 3.8 HP variable speed pump
Equipment pads with 230V single-phase electrical service
Installations using external or existing compatible controls
Applications requiring 2 AUX relay capability
Pool systems with higher flow requirements

What’s Included

Jandy ePump variable speed pump
3.8 HP variable speed motor
Integrated pump drive assembly
2 AUX relays
Factory-installed pump housing and wet end
Manufacturer-supplied installation documentation and packaging

What’s Not Included

Controller
Jandy automation system
External keypad or remote controller unless included by manufacturer packaging
Plumbing unions unless included by manufacturer packaging
Electrical wiring materials
Breaker or disconnect
Installation labor
Professional programming service
Additional relays beyond the included 2 AUX relays
Replacement seal kit or spare parts
Automation communication wiring unless supplied by manufacturer packaging

Compatibility Guidance

The Jandy VSSHP3802A is intended for compatible pool and spa systems that require a 3.8 HP variable speed pump with professional installation and proper control configuration.

Before ordering, confirm the following:

You need model VSSHP3802A.
Your system requires a 3.8 HP variable speed pump.
Your electrical setup is compatible with 230V single-phase operation.
Your installer has confirmed the correct breaker, wiring, bonding, and grounding requirements.
Your plumbing size and equipment pad layout are compatible with this pump.
Your filter, heater, valves, salt system, and other connected equipment can handle the expected flow.
You understand this model does not include a controller.
Your existing or planned control setup is compatible with this pump.
A qualified pool professional will install and program the pump.

Do not order this pump by horsepower alone. Pump compatibility depends on voltage, plumbing layout, system flow requirements, automation/control setup, equipment ratings, and installation environment.

Confirm Before Ordering

Before purchasing, please verify:

You need the Jandy VSSHP3802A model.
You need a 3.8 HP variable speed pump.
Your installation requires 230V single-phase operation.
Your system needs or can use the included 2 AUX relays.
You understand this pump is supplied without a controller.
Your pool professional has confirmed automation or control compatibility.
Your plumbing and equipment pad layout are compatible.
Your filter, heater, salt system, and other connected equipment are rated for the expected flow.
You understand returns are not accepted on this or any electronic equipment.
You have reviewed and agree to the Important Purchase Notice listed above.

Key Features

Professional-grade Jandy ePump variable speed pump
Model VSSHP3802A
3.8 HP variable speed motor
230V single-phase electrical requirement
Includes 2 AUX relays
Supplied without controller
Designed for compatible pool and spa circulation systems
Supports energy-efficient pump operation when properly programmed
Useful for high-performance new installations and pump upgrades
Compatible with properly configured professional control setups
Professional installation required
Product support not provided to homeowners
Returns not accepted on electronic equipment

Benefits

The Jandy ePump VSSHP3802A helps improve pool circulation efficiency by allowing pump speed to be adjusted to the specific needs of the system. When properly installed and programmed, a variable speed pump can reduce energy use compared with traditional single-speed operation while still supporting filtration, heating, water features, spa operation, and other circulation needs.

The 3.8 HP motor provides strong performance for compatible pool and spa systems with higher flow demands. The included 2 AUX relays add control flexibility for compatible professional installations.

Because this model does not include a controller, it is best suited for systems where a qualified installer has already specified the control method, such as a compatible Jandy automation setup.

Variable Speed Pump Advantage

A variable speed pump can operate at different speeds instead of running at one fixed speed. This allows the pump to be programmed for different tasks, such as filtration, heating, spa mode, water features, priming, or cleaning cycles.

Lower-speed operation can often reduce energy use and noise while maintaining circulation. Higher-speed operation can be used when the system requires more flow, such as for spa jets, heaters, water features, or startup priming.

Actual savings and performance depend on system design, plumbing, equipment, run schedule, water features, and programming.

Recommended Use

Use the Jandy ePump VSSHP3802A when a pool professional has specified a 3.8 HP variable speed pump for a compatible pool or spa system and a separate control method is already planned.

This model is especially useful for professional equipment pad installations where high-performance variable speed operation, 230V single-phase power, and auxiliary relay capability are required.

For systems needing a pump with an included controller, a different model or accessory may be required.

Installation Notes

This pump should be installed by a qualified pool professional or licensed electrician. Installation may involve high-voltage wiring, bonding, grounding, plumbing connections, priming, automation/control wiring, AUX relay setup, pump programming, and startup testing.

Professional installation is required to ensure:

Correct 230V single-phase wiring
Proper breaker sizing
Proper bonding and grounding
Correct plumbing connection and flow direction
Proper pump priming and startup
Safe AUX relay wiring and configuration
Compatible automation or control setup
Correct speed programming for filtration, heating, and other features
Verification that connected pool equipment can handle the flow
Leak-free installation and safe operation

Improper installation may cause electrical hazards, pump failure, equipment damage, poor circulation, automation issues, water leaks, or voided warranty coverage.

Important Electronic Equipment Notice

This pump contains electronic components, including the variable speed drive and control electronics. Electronic equipment is sensitive to improper wiring, voltage issues, water intrusion, shipping damage, and incorrect installation.

Inspect the product immediately upon delivery. Any shipping damage must be reported promptly. Returns are not accepted on this or any electronic equipment.

For added protection during transit, 2-Day Air or Next Day Air shipping is strongly recommended.

Technical Specifications

Customer-Facing Q&A

Q: Does this pump include a controller?
A: No. This model is supplied without a controller.

Q: Who should purchase this pump?
A: This product is intended to be purchased and installed by pool professionals.

Q: Is product support provided to homeowners?
A: No. Product support is not provided to homeowners for this item.

Q: Can this pump be returned?
A: No. Returns are not accepted on this or any electronic equipment.

Q: What happens if the pump is damaged during shipping?
A: Shipping damage will be covered, but it must be reported promptly after delivery.

Q: What shipping method is recommended?
A: To help prevent possible damage during transit, 2-Day Air or Next Day Air shipping is strongly recommended.

Q: What horsepower is this pump?
A: This model is rated at 3.8 HP.

Q: What voltage does this pump use?
A: This model requires 230V single-phase electrical service.

Q: Does this pump include AUX relays?
A: Yes. This model includes 2 AUX relays.

Q: Is this a variable speed pump?
A: Yes. This is a Jandy ePump variable speed pump.

Q: Can I order this pump by horsepower alone?
A: No. Pump compatibility depends on voltage, plumbing, flow requirements, automation/control setup, and connected pool equipment.

Q: Can a homeowner install this pump?
A: No. Professional installation is required. This pump involves electrical wiring, bonding, grounding, plumbing, control setup, and programming.

Q: What should I check before ordering?
A: Confirm that you need model VSSHP3802A, that your system requires a 3.8 HP variable speed pump, that your electrical setup supports 230V single-phase, and that your pool professional has confirmed control compatibility.