⚠️ Important Purchase Notice

This product is intended to be purchased and installed by pool professionals. Product support is not provided to homeowners.

Returns are not accepted on this or any electronic equipment.

Damages to product from shipping will be covered and must be reported promptly.

To prevent possible damage during transit, we strongly recommend selecting Freight Only.

By purchasing this item, you agree to the terms above.

Product Overview

The Jandy ePump Variable Speed Pump with SpeedSet Controller | VSSHP270DV2AS is a professional-grade variable speed pool pump designed for efficient, high-performance circulation in compatible residential pool and spa systems. With a 2.7 HP motor, 115/230V single-phase compatibility, 2 AUX relays, and an included SpeedSet Controller, this pump gives pool professionals flexible installation and control options for properly matched pool systems.

Variable speed operation allows the pump to run at different speeds for filtration, heating, spa mode, water features, priming, and cleaning cycles. When properly programmed, this can help reduce energy use compared with traditional single-speed pump operation while still supporting strong circulation when higher flow is needed.

Because this pump contains electronic components and must be matched to the correct plumbing, electrical, automation, and equipment requirements, it should be selected and installed only by qualified pool professionals.

Ideal For

Pool professionals installing Jandy variable speed pump systems
Residential pool and spa circulation systems
Energy-efficient pump upgrades
Compatible Jandy equipment pad installations
Systems requiring a 2.7 HP variable speed pump
Equipment pads with 115V or 230V single-phase electrical service
Installations that need an included SpeedSet Controller
Applications requiring 2 AUX relay capability
Pool systems requiring flexible speed control and scheduling

What’s Included

Jandy ePump variable speed pump
2.7 HP variable speed motor
Integrated pump drive assembly
SpeedSet Controller
2 AUX relays
Factory-installed pump housing and wet end
Manufacturer-supplied installation documentation and packaging

What’s Not Included

Jandy automation system unless separately specified
Additional external controller beyond the included SpeedSet Controller
Plumbing unions unless included by manufacturer packaging
Electrical wiring materials
Breaker or disconnect
Installation labor
Professional programming service beyond installation setup
Additional relays beyond the included 2 AUX relays
Replacement seal kit or spare parts
Automation communication wiring unless supplied by manufacturer packaging

Compatibility Guidance

The Jandy VSSHP270DV2AS is intended for compatible pool and spa systems that require a 2.7 HP variable speed pump with professional installation and proper control configuration.

Before ordering, confirm the following:

You need model VSSHP270DV2AS.
Your system requires a 2.7 HP variable speed pump.
Your electrical setup is compatible with 115/230V single-phase operation.
Your installer has confirmed the correct voltage configuration, breaker, wiring, bonding, and grounding requirements.
Your plumbing size and equipment pad layout are compatible with this pump.
Your filter, heater, valves, salt system, and other connected equipment can handle the expected flow.
You want the version that includes the SpeedSet Controller.
Your existing or planned automation/control setup is compatible with this pump if additional automation is being used.
A qualified pool professional will install and program the pump.

Do not order this pump by horsepower alone. Pump compatibility depends on voltage, plumbing layout, system flow requirements, automation/control setup, equipment ratings, and installation environment.

Confirm Before Ordering

Before purchasing, please verify:

You need the Jandy VSSHP270DV2AS model.
You need a 2.7 HP variable speed pump.
Your installation requires or supports 115/230V single-phase operation.
You want the model that includes the SpeedSet Controller.
Your system needs or can use the included 2 AUX relays.
Your pool professional has confirmed voltage configuration and control compatibility.
Your plumbing and equipment pad layout are compatible.
Your filter, heater, salt system, and other connected equipment are rated for the expected flow.
You understand returns are not accepted on this or any electronic equipment.
You have reviewed and agree to the Important Purchase Notice listed above.

Key Features

Professional-grade Jandy ePump variable speed pump
Model VSSHP270DV2AS
2.7 HP variable speed motor
115/230V single-phase electrical compatibility
Includes SpeedSet Controller
Includes 2 AUX relays
Designed for compatible pool and spa circulation systems
Supports energy-efficient pump operation when properly programmed
Useful for new installations and pump upgrades
Compatible with properly configured professional control setups
Professional installation required
Product support not provided to homeowners
Returns not accepted on electronic equipment

Benefits

The Jandy ePump VSSHP270DV2AS helps improve pool circulation efficiency by allowing pump speed to be adjusted to the specific needs of the system. Lower speeds can support daily filtration while using less energy and producing less noise, while higher speeds can support tasks such as spa mode, heater operation, priming, water features, or cleaning cycles.

The 2.7 HP motor provides strong circulation performance for compatible residential pool and spa systems. The 115/230V single-phase capability gives installers flexibility when matching the pump to the available electrical service.

The included SpeedSet Controller allows local pump control and programming without requiring a separate controller purchase, while the 2 AUX relays provide additional control capability for compatible professional installations.

SpeedSet Controller Advantage

The included SpeedSet Controller provides a local control interface for setting pump operation, schedules, and speed functions when properly installed and configured.

This is especially useful for installations where a dedicated pump controller is needed at the equipment pad or where the pump is not being controlled entirely through a larger automation system.

Your pool professional should confirm how the SpeedSet Controller will be used with your equipment layout and whether any additional automation accessories are required.

Variable Speed Pump Advantage

A variable speed pump can operate at different speeds instead of running at one fixed speed. This allows the pump to be programmed for different tasks, such as filtration, heating, spa mode, water features, priming, or cleaning cycles.

Lower-speed operation can often reduce energy use and noise while maintaining circulation. Higher-speed operation can be used when the system requires more flow, such as for spa jets, heaters, water features, or startup priming.

Actual savings and performance depend on system design, plumbing, equipment, run schedule, water features, and programming.

Recommended Use

Use the Jandy ePump VSSHP270DV2AS when a pool professional has specified a 2.7 HP variable speed pump with SpeedSet Controller for a compatible pool or spa system.

This model is especially useful for professional equipment pad installations where variable speed operation, 115/230V single-phase compatibility, local SpeedSet control, and auxiliary relay capability are required.

For systems that need a pump without a controller, or require a different horsepower or voltage configuration, a different model may be required.

Installation Notes

This pump should be installed by a qualified pool professional or licensed electrician. Installation may involve high-voltage wiring, voltage configuration, bonding, grounding, plumbing connections, priming, SpeedSet Controller setup, automation/control wiring, AUX relay setup, pump programming, and startup testing.

Professional installation is required to ensure:

Correct 115V or 230V configuration
Proper breaker sizing
Proper bonding and grounding
Correct plumbing connection and flow direction
Proper pump priming and startup
Correct SpeedSet Controller setup
Safe AUX relay wiring and configuration
Compatible automation or control setup if used
Correct speed programming for filtration, heating, and other features
Verification that connected pool equipment can handle the flow
Leak-free installation and safe operation

Improper installation may cause electrical hazards, pump failure, equipment damage, poor circulation, automation issues, water leaks, or voided warranty coverage.

Important Electronic Equipment Notice

This pump contains electronic components, including the variable speed drive, controller, relays, and control electronics. Electronic equipment is sensitive to improper wiring, voltage issues, water intrusion, shipping damage, and incorrect installation.

Inspect the product immediately upon delivery. Any shipping damage must be reported promptly. Returns are not accepted on this or any electronic equipment.

For added protection during transit, 2-Day Air or Next Day Air shipping is strongly recommended.

Technical Specifications

Customer-Facing Q&A

Q: Does this pump include a controller?
A: Yes. This model includes the SpeedSet Controller.

Q: Who should purchase this pump?
A: This product is intended to be purchased and installed by pool professionals.

Q: Is product support provided to homeowners?
A: No. Product support is not provided to homeowners for this item.

Q: Can this pump be returned?
A: No. Returns are not accepted on this or any electronic equipment.

Q: What happens if the pump is damaged during shipping?
A: Shipping damage will be covered, but it must be reported promptly after delivery.

Q: What shipping method is recommended?
A: To help prevent possible damage during transit, 2-Day Air or Next Day Air shipping is strongly recommended.

Q: What horsepower is this pump?
A: This model is rated at 2.7 HP.

Q: What voltage does this pump use?
A: This model supports 115/230V single-phase operation. A qualified installer must confirm the correct voltage configuration.

Q: Does this pump include AUX relays?
A: Yes. This model includes 2 AUX relays.

Q: Is this a variable speed pump?
A: Yes. This is a Jandy ePump variable speed pump.

Q: What is the SpeedSet Controller used for?
A: The SpeedSet Controller provides local pump control and programming when properly installed and configured.

Q: Can I order this pump by horsepower alone?
A: No. Pump compatibility depends on voltage, plumbing, flow requirements, automation/control setup, and connected pool equipment.

Q: Can a homeowner install this pump?
A: No. Professional installation is required. This pump involves electrical wiring, bonding, grounding, plumbing, control setup, and programming.

Q: What should I check before ordering?
A: Confirm that you need model VSSHP270DV2AS, that your system requires a 2.7 HP variable speed pump, that your electrical setup supports 115/230V single-phase, and that your pool professional has confirmed control compatibility.