Product Overview

The Jandy Pro JXi VersaFlo Bypass Accessory Kit | JXIVFKIT is a genuine Jandy accessory kit designed for compatible Jandy Pro Series JXi pool and spa heaters. This kit adds VersaFlo integrated bypass functionality, allowing water to bypass the heat exchanger when the heater is not actively firing.

By reducing unnecessary water flow through the heater during non-heating operation, the VersaFlo bypass can help improve hydraulic efficiency and reduce system restriction. This is especially useful for pools with variable-speed pumps, where lower-speed operation may be possible when the heater is bypassed.

The kit includes the bypass assembly with wiring harness, gasket, installation hardware, wire ties, cable grommet, and wrench needed for compatible JXi heater installations.

⚠️ Important Purchase Notice

This product is intended to be purchased and installed by pool professionals. Product support is not provided to homeowners.

Returns are not accepted on this or any electronic equipment.

Damages to product from shipping will be covered and must be reported promptly.

To prevent possible damage during transit, we strongly recommend selecting Freight.

By purchasing this item, you agree to the terms above.

Ideal For

• Jandy Pro Series JXi heaters
• Pool and spa heater efficiency upgrades
• Variable-speed pump systems
• Reducing hydraulic restriction when not heating
• Heater bypass automation applications
• JXi heater repairs or upgrades
• Professional pool heater installations
• Equipment pad performance upgrades
• Pool systems with Jandy Versa Plumb layouts
• Pool professionals servicing Jandy heater systems

Key Features

• Genuine Jandy accessory kit — designed for compatible Jandy Pro Series JXi pool and spa heaters.
• VersaFlo integrated bypass functionality — allows water to bypass the heat exchanger when heating is not required.
• Improves hydraulic efficiency — helps reduce unnecessary restriction through the heater during normal circulation.
• Variable-speed pump friendly — can help allow lower pump speeds when heater flow is not needed.
• Automatic bypass operation — moves the internal flow gate into bypass position when the heater is not firing.
• No external plumbing modifications required — designed as an internal heater bypass upgrade for compatible models.
• Complete installation hardware included — includes wiring harness, gasket, screws, wire ties, cable grommet, and wrench.
• Compatible with many JXi heater models — supports common JXi 200K, 260K, and 400K heater configurations when verified.
• Professional-grade heater accessory — intended for qualified pool heater technicians and installers.
• Helps support energy savings — by reducing heater restriction, variable-speed pumps may be able to operate more efficiently during non-heating circulation.

Benefits

The Jandy JXIVFKIT VersaFlo Bypass Accessory Kit helps make compatible JXi heater systems more efficient by reducing flow restriction when the heater is not in use. In many pool systems, water continues passing through the heater even when heating is not needed. VersaFlo bypass functionality allows the system to route water around the heat exchanger during non-heating operation.

This can be especially valuable for variable-speed pump systems, where lowering hydraulic resistance may allow the pump to run at a lower speed for everyday filtration. The result can be quieter operation, improved circulation efficiency, and reduced energy use depending on the pool system setup.

For pool professionals, this kit provides a clean internal upgrade path for compatible JXi heaters without requiring a full external bypass manifold.

Specifications

Included Components

• 1 × VersaFlo bypass assembly with wiring harness
• 1 × bypass header gasket
• 6 × attachment screws
• Wire ties
• Cable grommet
• 5/16" wrench
• Manufacturer-supplied installation components

Heater, control board kits, flow sensor kits, plumbing fittings, unions, gas components, electrical supplies, and installation labor are sold separately unless specifically included by the supplier.

Compatibility Notes

This kit is designed for compatible Jandy Pro Series JXi heaters. Always confirm the exact heater model and serial number before ordering.

For some older JXi VersaFlo upgrades, especially units with Serial Number G and earlier, additional components may be required, such as:

• PIB Interface Circuit Board Kit
• Flow Sensor Kit

A qualified pool professional should verify heater revision, model number, and required accessory kits before installation.

Installation Notes

This accessory kit must be installed by a qualified pool professional familiar with Jandy JXi heater systems. Proper installation requires heater disassembly, correct bypass assembly placement, wiring harness routing, gasket installation, fastener torque, system inspection, and operational testing.

Before installation, turn off power and gas to the heater and allow the unit to cool. Confirm that the heater model is compatible and that the installation does not require additional board, sensor, or control components.

After installation, the heater should be tested for proper bypass operation, ignition sequence, flow detection, heating mode, non-heating circulation mode, and leak-free operation.

Customer-Facing Q&A

Q: What is the Jandy JXIVFKIT used for?
A: It is used to add VersaFlo integrated bypass functionality to compatible Jandy Pro Series JXi pool and spa heaters.

Q: What is the SKU?
A: The SKU is JXIVFKIT.

Q: What is the UPC?
A: The UPC is 052337069465.

Q: What is the distributor product number?
A: The distributor product number is LAR-151-3265.

Q: What does the VersaFlo bypass do?
A: It allows water to bypass the heater’s heat exchanger when the heater is not firing, reducing hydraulic restriction during normal circulation.

Q: Does this help with variable-speed pumps?
A: Yes. Reducing heater restriction can help variable-speed pumps operate more efficiently at lower speeds when heating is not needed.

Q: Does this require external plumbing changes?
A: The VersaFlo system is designed as an integrated heater bypass upgrade and typically does not require an external plumbing bypass when installed on compatible heaters.

Q: What heaters does this fit?
A: It fits select Jandy Pro Series JXi heaters, including many JXI200, JXI260, and JXI400 natural gas and propane models. Compatibility should be verified before purchase.

Q: Does this work with JXiQ heaters?
A: Some listings reference compatibility with JXi and JXiQ heater platforms, but exact model and revision should be verified by a pool professional before ordering.

Q: What is included in the kit?
A: The kit includes the bypass assembly with wiring harness, bypass header gasket, six attachment screws, wire ties, cable grommet, and a 5/16" wrench.

Q: Do older heaters need extra parts?
A: Some older JXi heaters, especially Serial Number G and earlier, may require additional interface board or flow sensor components.

Q: Can a homeowner install this kit?
A: No. This product is intended to be purchased and installed by pool professionals.

Q: Are returns accepted on this item?
A: No. Returns are not accepted on this or any electronic equipment.