Product Overview
The Pentair 42001-0402 2 in. Slip Half Union is a genuine Pentair replacement water connection union for Pentair MasterTemp and Sta-Rite Max-E-Therm gas pool and spa heaters. It connects the heater's water inlet or outlet to 2 in. PVC plumbing, allowing the heater to be disconnected from the plumbing for service.
Ideal For
Replacing a cracked, leaking, or worn heater union
Re-plumbing a MasterTemp or Sta-Rite heater during heater replacement
Service technicians performing heater repairs that require disconnecting the plumbing
Key Features
Genuine Pentair part: replacement under part number 42001-0402.
2 in. slip connection: solvent-welds to 2 in. PVC pipe.
Half union design: the union nut threads onto the heater water connection so the heater can be removed without cutting pipe.
Specifications
| Specification | Details |
|---|---|
| Brand | Pentair |
| Part Number | 42001-0402 |
| Product Type | Heater Half Union |
| Connection Size | 2 in. slip |
| Compatible Heaters | Pentair MasterTemp and Sta-Rite Max-E-Therm |
| Replacement O-Ring | 5057-26 |
Warranty & Compatibility
Compatibility Notes
This union is used on the water connections of Pentair MasterTemp and Sta-Rite Max-E-Therm heaters. Confirm that your heater uses a 2 in. slip union and match the part number on your heater's parts list before ordering. Quantity per package can vary by listing; check the listing quantity before ordering.
Installation Notes
Turn off the pump and heater and close isolation valves before removing the old union. Solvent-weld the slip end to clean 2 in. PVC pipe using the correct primer and cement, allow full cure time, and make sure the union O-ring is clean, lubricated with a pool-rated lubricant, and seated before hand-tightening the union nut. Check for leaks at startup.
Customer-Facing Q&A
Q: What is the part number for this union?
A: Pentair part number 42001-0402.
Q: Which heaters does it fit?
A: It is used on Pentair MasterTemp and Sta-Rite Max-E-Therm heaters. Confirm your heater's parts list before ordering.
Q: What pipe size does it connect to?
A: It has a 2 in. slip connection for 2 in. PVC pipe.
Q: Is the O-ring available separately?
A: Yes. The replacement O-ring for this union is Pentair part 5057-26.
Q: Can I reuse my old union?
A: If the union body or threads are cracked or damaged, replace it. A leak at the union is often caused by a worn O-ring, which can be replaced separately.
Pentair MasterTemp & Sta-Rite 2 in. Union Slip Kit | 42001-0402
| Specification | Details |
|---|---|
| Brand | Pentair |
| Part Number | 42001-0402 |
| Product Type | Heater Half Union |
| Connection Size | 2 in. slip |
| Compatible Heaters | Pentair MasterTemp and Sta-Rite Max-E-Therm |
| Replacement O-Ring | 5057-26 |
More Sta-Rite Max-E-Therm Heaters & Parts
Shop all Sta-Rite Max-E-Therm Heaters & Parts →-
Pentair Max-E-Therm Gas Heater, 200K BTU, Natural Gas | SR200NA
-
Pentair Sta-Rite Max-E-Therm 200 Propane Gas Heater | SR200LP
-
Sta-Rite Max-E-Therm 400k BTU Natural Gas Heater | SR400NA
-
Sta-Rite Max-E-Therm 400 High Performance Pool & Spa Heater, Propane Gas, 400K BTU, 120/240 VAC, 60 Hz | SR400LP
-
Sta-Rite Max-E-Therm 400 HD High Performance Heater, Natural Gas, 400K BTU, 120/240 VAC, 60 Hz, 127 lbs | SR400HD
-
Pentair Max-E-Therm Heater Propane Gas, ASME, 400K BTU, 120/240 VAC | 460764
-
Pentair MasterTemp / Max-E-Therm Control PCBA & Membrane Pad Replacement Kit – New Version | 461105Z
-
Pentair MasterTemp & Sta-Rite Max-E-Therm Thermal Regulator Kit | 77707-0010