Product Overview
The Pentair PKG 188Z is a genuine OEM 2-inch slip half union kit used on a wide range of Pentair and Sta-Rite pool and spa equipment, including pumps, modular filters and MasterTemp and Max-E-Therm heaters. The pipe slides into the slip side of the union and is secured with PVC cement, while the threaded union connection lets you disconnect equipment for service or replacement without cutting pipe. An O-ring seal creates a tight, watertight connection.
⚠️ Important Purchase Notice
Plumbing connections should be made by a qualified pool professional in line with local codes and the equipment manufacturer's instructions. Please inspect your shipment on arrival and report any shipping damage promptly.
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Ideal For
- Plumbing 2-inch pipe to Pentair and Sta-Rite pumps, filters and heaters
- Replacing cracked, worn or leaking unions
- Equipment replacements where a union connection makes future service easier
- Pool service technicians and installers
Key Features
- 2-inch slip connection, secured with PVC cement
- Half union design that completes the union connection on the equipment
- O-ring seal for a leak-free connection
- Chemical-resistant construction for pool and spa systems
- Genuine Pentair OEM part
Benefits
- Disconnect equipment for maintenance or replacement without cutting pipe
- Tight, watertight seal helps prevent plumbing leaks
- OEM fit with Pentair and Sta-Rite equipment
- Straightforward installation
Compatibility
The PKG 188Z is used across many Pentair and Sta-Rite products, including:
- Pumps: Max-E-Pro, Dyna-Pro and Dyna-Pro E, Dyna-Glas and Dyna-Max series, Dyna-Wave series, and the IntelliPro VS 3050. Some IntelliFlo models, such as IntelliFlo3, may use a different union kit (e.g. 410028Z).
- Filters: Sta-Rite System 3 Modular Media SM-Series (e.g. S7M120, S7M400, S8M150, S8M500), System 2 Modular D.E. PLDE-Series (e.g. LDE36, PLDE70) and System 3 Modular D.E. SMD-Series inground filters.
- Heaters: Pentair MasterTemp and Sta-Rite Max-E-Therm heaters.
Before ordering, check your equipment's manual or existing union and confirm the part number PKG 188Z matches.
Installation or Upgrade Context
Half unions are installed where the plumbing meets the pump, filter or heater, so the equipment can be removed later without cutting pipe. They are commonly replaced when a union cracks or leaks, or when new equipment is installed. Lubricate the O-ring with a pool-safe lubricant and hand-tighten the union nut.
What’s Included
- Pentair PKG 188Z 2-inch slip half union package (1 package)
Specifications
| Specification | Details |
|---|---|
| Manufacturer | Pentair |
| Product Type | Half union kit |
| SKU / Model | PKG 188Z |
| Connection Size | 2 in. slip |
| Compatible Models | Pentair and Sta-Rite pumps, modular filters, MasterTemp and Max-E-Therm heaters (see Compatibility) |
| Application | Pool and spa equipment plumbing |
| Shipping Dimensions | 7.62 x 5.75 x 6 in. |
| Shipping Weight | 1.09 lbs |
| Warranty | Manufacturer's warranty |
| UPC / Barcode | 788379885878 |
Warranty
This product is covered by Pentair's manufacturer warranty, subject to Pentair's terms and conditions. Pool Supply Depot can provide proof of purchase for warranty claims.
Customer Q&A
What size is this union?
It is a 2-inch slip half union, cemented onto 2-inch pipe.
Will it fit my MasterTemp or Max-E-Therm heater?
Yes, the PKG 188Z is used on Pentair MasterTemp and Sta-Rite Max-E-Therm heaters. Please confirm against your heater's manual.
Does it fit IntelliFlo pumps?
It fits the IntelliPro VS 3050. Some IntelliFlo models, such as IntelliFlo3, may use a different union kit, so confirm your pump's part number.
Is this a genuine Pentair part?
Yes, it is a genuine Pentair OEM part.
Pentair & Sta-Rite 2" Slip Half Union Kit for Pumps, Filters & Heaters | PKG 188Z
| Specification | Details |
|---|---|
| Manufacturer | Pentair |
| Product Type | Half union kit |
| SKU / Model | PKG 188Z |
| Connection Size | 2 in. slip |
| Compatible Models | Pentair and Sta-Rite pumps, modular filters, MasterTemp and Max-E-Therm heaters (see Compatibility) |
| Application | Pool and spa equipment plumbing |
| Shipping Dimensions | 7.62 x 5.75 x 6 in. |
| Shipping Weight | 1.09 lbs |
| Warranty | Manufacturer's warranty |
| UPC / Barcode | 788379885878 |
More Sta-Rite Max-E-Therm Heaters & Parts
Shop all Sta-Rite Max-E-Therm Heaters & Parts →-
Pentair Max-E-Therm Gas Heater, 200K BTU, Natural Gas | SR200NA
-
Pentair Sta-Rite Max-E-Therm 200 Propane Gas Heater | SR200LP
-
Sta-Rite Max-E-Therm 400k BTU Natural Gas Heater | SR400NA
-
Sta-Rite Max-E-Therm 400 High Performance Pool & Spa Heater, Propane Gas, 400K BTU, 120/240 VAC, 60 Hz | SR400LP
-
Sta-Rite Max-E-Therm 400 HD High Performance Heater, Natural Gas, 400K BTU, 120/240 VAC, 60 Hz, 127 lbs | SR400HD
-
Pentair Max-E-Therm Heater Propane Gas, ASME, 400K BTU, 120/240 VAC | 460764
-
Pentair MasterTemp / Max-E-Therm Control PCBA & Membrane Pad Replacement Kit – New Version | 461105Z
-
Pentair MasterTemp & Sta-Rite Max-E-Therm Thermal Regulator Kit | 77707-0010