Product Overview

The Raypak 009832 D-2 Power Vent is a genuine Raypak power venting kit for Raypak 206A and 266A-size digital (IID) pool heaters. It mechanically exhausts flue products through a 4" diameter exhaust connection, and its solid-state control lets the blower purge any residual gas buildup in the heater after the heater shuts down.

Ideal For

Indoor installations of Raypak 206A and 266A-size digital (IID) pool heaters that require power venting

Installations where a natural-draft vent is not practical

Pool heater technicians and installers completing a code-compliant vent system

Key Features

Power vent kit: for Raypak 206 and 266K BTU heaters.

Works with Raypak digital pool heaters: for IID (electronic ignition) models.

Certified to ANSI Z21.56.

4" diameter exhaust connection: must be vented with stainless steel gas-tight venting.

130 CFM blower with solid-state post-purge control.

Up to 100 ft equivalent vent length (Category III).

Specifications

Warranty & Compatibility

Compatibility Notes

The 009832 is the D-2 power vent for Raypak 206A and 266A-size digital heaters with electronic (IID) ignition. It is not for millivolt heaters. Larger 336A/407A-size heaters use a different power vent. Confirm the heater model and ignition type before ordering.

Installation Notes

Installation should be performed by a qualified gas appliance technician following Raypak's instructions and local codes. The 4" exhaust must be run in stainless steel gas-tight vent pipe, and total vent length must stay within the rated equivalent length. Verify 240V electrical supply and correct wiring to the heater before startup.

Customer-Facing Q&A

Q: What is the part number and UPC?
A: Raypak part number 009832, UPC 840891018360.

Q: Which heaters does this power vent fit?
A: Raypak 206A and 266A-size digital (IID) pool heaters. Confirm your heater model before ordering.

Q: Will it work on a millivolt heater?
A: No. This power vent is for IID (electronic ignition) heaters only.

Q: What size vent pipe does it use?
A: It has a 4" diameter exhaust connection and must be vented with stainless steel gas-tight venting.

Q: What voltage does it require?
A: 240V.