Product Overview
The Raypak 006707F is a factory replacement polymer return header with gasket for Raypak pool and spa heaters with a polymer heat exchanger, including models 206A-406A atmospheric, 207A-407A Low NOx, and 206A-406A Versa II and millivolt heaters. The return header sits on the heat exchanger and routes water through the tubes; a cracked, leaking or heat-damaged header should be replaced to restore proper flow and stop leaks.
⚠️ Important Purchase Notice
Raypak specifies installation by qualified personnel. Confirm your heater model and that it has a polymer (not brass or cast iron) header before ordering. Please inspect your shipment on arrival and report any damage promptly.
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Ideal For
- Raypak 206A, 266A, 336A and 406A atmospheric pool heaters with polymer heat exchangers
- Raypak 207A, 267A, 337A and 407A Low NOx pool heaters
- Raypak 206A-406A Versa II and millivolt pool heaters
- Leaking or cracked return headers and heat exchanger service
Key Features
- Genuine Raypak replacement kit
- Polymer (Capron nylon) return header
- Includes header gasket (O-ring), refractory retainer assemblies with insulation, and front and rear refractory support brackets
- Pool360 lists a flange nut kit as included
Benefits
- A new factory header seals properly against the heat exchanger, stopping leaks that waste water and can damage heater components.
- The kit includes the retainers and brackets the job calls for, so the repair can be completed without hunting for small parts.
Compatibility
For Raypak heaters with a polymer heat exchanger: models 206A, 266A, 336A, 406A atmospheric; 207A, 267A, 337A, 407A Low NOx; and 206A-406A Versa II and millivolt pool heaters. Check your rating plate and please confirm the part number for your heater before ordering.
Installation or Upgrade Context
Shut off power, gas and water before servicing. Remove the old header, install the new header with its gasket, and tighten the header nuts in sequence to about 7 ft-lb per Raypak instructions. If the old header shows heat damage, Raypak notes the heat exchanger must be removed for inspection, which mainly affects older units built before mid-2000.
What’s Included
- (1) Polymer return header
- (1) Header gasket (O-ring)
- (2) Refractory retainer assemblies with insulation
- (2) Front and (2) rear refractory support brackets
- Flange nut kit (per Pool360)
Specifications
| Specification | Details |
|---|---|
| Manufacturer | Raypak |
| Product Type | Heater Return Header Kit |
| SKU / Model | 006707F |
| Material | Polymer (Capron) |
| Color | Black, Silver |
| Compatible models | 206A, 266A, 336A, 406A atmospheric; 207A, 267A, 337A, 407A Low NOx; 206A-406A Versa II and millivolt (polymer heat exchanger) |
| Header Nut Torque | 7 ft-lb (per Raypak instructions) |
| Application | Residential pool heaters |
| Shipping Dimensions | 18 x 6.5 x 6.5 in |
| Shipping Weight | 4 lb |
| Warranty | Manufacturer's warranty |
| UPC / Barcode | 840891002581 |
Warranty
Covered by Raypak's manufacturer warranty, subject to the manufacturer's terms. Pool Supply Depot can provide proof of purchase for warranty claims.
Customer Q&A
Which heaters does this fit?
Raypak heaters with a polymer heat exchanger: 206A-406A atmospheric, 207A-407A Low NOx, and 206A-406A Versa II and millivolt models.
Does it come with a gasket?
Yes. A header gasket (O-ring) is included, along with refractory retainers and support brackets.
Will it fit a heater with a cast iron or brass header?
No. This is a polymer header for heaters with a polymer heat exchanger.
Can I install it myself?
Raypak recommends installation by a qualified service technician.
Is this the inlet/outlet header?
No. This is the return header. The inlet/outlet header is a different part.
Raypak Polymer Return Header Kit with Gasket, 206A-406A Pool Heaters | 006707F
| Specification | Details |
|---|---|
| Manufacturer | Raypak |
| Product Type | Heater Return Header Kit |
| SKU / Model | 006707F |
| Material | Polymer (Capron) |
| Color | Black, Silver |
| Compatible models | 206A, 266A, 336A, 406A atmospheric; 207A, 267A, 337A, 407A Low NOx; 206A-406A Versa II and millivolt (polymer heat exchanger) |
| Header Nut Torque | 7 ft-lb (per Raypak instructions) |
| Application | Residential pool heaters |
| Shipping Dimensions | 18 x 6.5 x 6.5 in |
| Shipping Weight | 4 lb |
| Warranty | Manufacturer's warranty |
| UPC / Barcode | 840891002581 |
More Raypak Pool Heater Parts
Shop all Raypak Pool Heater Parts →-
Raypak Polymer Header O-Ring Gasket 2-Pack | 006713F
-
Raypak Thermocouple Pilot Generator 750mV | OEM Replacement | RAY600019B
-
Raypak Heat Pump Digital Control Board 9350/9353 5450-8450 | 100-10000347
-
RayPak Element Tube Assembly 0005/0011 Kit | 017139F
-
Raypak Flat Header Gasket 3/4" ID | 800014B
-
Raypak Sensor Well 105A–405/206–408 Heater Models | 003765F
-
Raypak Digital Heater Bypass Valve Kit | 016194F
-
Raypak Switch/Decal Membrane | OEM Heater Control Replacement | 009492F