Product Overview
The Speck Pumps Model 21-80/33 GS (SA104-1400F-000) is a 4 HP high-efficiency, self-priming plastic pool pump for 208-230V single-phase power. It is built for commercial vacuum and sand filters, hydrotherapy, swim spas, waterfalls, water slides and vanishing-edge pools, with 4 in quick-disconnect unions and a thermally protected motor that needs no motor starter.
⚠️ Important Purchase Notice
Installation should be done by a licensed electrician or qualified pool contractor, following the Speck installation guide and local codes. The motor is open drip proof, so protect it from direct rain and spray. Inspect the shipment upon arrival and report damage promptly.
WARNING: This product can expose you to chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.
Ideal For
- Commercial vacuum and sand filter systems.
- Hydrotherapy installations and swim spas.
- Waterfalls, water slides and vanishing-edge pools.
- Salt pools up to 5,000 ppm.
- Replacing an existing Speck 21-80 pump.
Key Features
- Self-priming design simplifies start-up.
- Mechanical shaft seal that lets the pump run dry for up to one hour.
- Non-corrosive, chemical- and UV-resistant plastic, rated to 175°F water.
- 4 in quick-disconnect unions.
- Heavy-duty 56-frame energy-efficient motor, thermally protected (no motor starter required), PSC switchless design.
- Open drip proof (ODP) motor, 1.25 service factor, 5 total HP.
Benefits
- Self-priming saves time at start-up and after service.
- No motor starter needed, which simplifies the electrical install.
- Dry-run tolerance protects the seal if the pump loses prime.
- Plastic body resists corrosion, chemicals and UV.
Compatibility
Requires 208-230V single-phase power and 4 in plumbing connections. Confirm the part number SA104-1400F-000, your voltage, plumbing size and required flow and head before ordering, and compare it with your existing Speck 21-80 setup if replacing.
Installation or Upgrade Context
Set the pump on a level, protected pad, connect suction and discharge with the 4 in unions, and wire the motor to a correctly sized single-phase circuit. Fill the strainer housing, start the pump and let it self-prime, then confirm flow before putting the system into service.
What’s Included
- Speck Model 21-80/33 GS 4 HP self-priming pump with motor
- 4 in quick-disconnect unions
Specifications
| Specification | Details |
|---|---|
| Manufacturer | Speck Pumps |
| Product Type | Self-priming commercial pool pump, single speed |
| SKU / Model | SA104-1400F-000 (Model 21-80/33 GS) |
| Horsepower | 4 HP, 1.25 service factor (5 THP) |
| Voltage / Phase | 208-230V, single phase |
| Motor | ODP, 56 frame, thermally protected |
| Union Size | 4 in quick-disconnect |
| Max Water Temperature | 175°F |
| Max Salt Concentration | 5,000 ppm |
| Housing Material / Color | Plastic / Black |
| Product Size | 16 in H x 11 in W |
| Country of Origin | United States |
| Shipping Dimensions | 30 x 14 x 13 in |
| Shipping Weight | 71 lb |
| Warranty | 2 years |
Warranty
Covered by Speck’s 2-year manufacturer warranty, subject to the manufacturer’s terms. Pool Supply Depot can provide proof of purchase for warranty claims.
Customer Q&A
Do I need a motor starter?
No. The motor is thermally protected, so no motor starter is required.
Is this pump self-priming?
Yes. It self-primes once the strainer housing is filled.
Can I use it on a saltwater pool?
Yes, with salt levels up to 5,000 ppm.
Does it need three-phase power?
No. It runs on 208-230V single-phase power.
Speck Pumps 21-80/33 GS Self-Priming Commercial Pool Pump, 4 HP, 208-230V, Single Phase | SA104-1400F-000
| Specification | Details |
|---|---|
| Manufacturer | Speck Pumps |
| Product Type | Self-priming commercial pool pump, single speed |
| SKU / Model | SA104-1400F-000 (Model 21-80/33 GS) |
| Horsepower | 4 HP, 1.25 service factor (5 THP) |
| Voltage / Phase | 208-230V, single phase |
| Motor | ODP, 56 frame, thermally protected |
| Union Size | 4 in quick-disconnect |
| Max Water Temperature | 175°F |
| Max Salt Concentration | 5,000 ppm |
| Housing Material / Color | Plastic / Black |
| Product Size | 16 in H x 11 in W |
| Country of Origin | United States |
| Shipping Dimensions | 30 x 14 x 13 in |
| Shipping Weight | 71 lb |
| Warranty | 2 years |
More Speck Commercial Pool Pumps
Shop all Speck Commercial Pool Pumps →-
Speck Pumps Normblock Multi 125/250 Commercial Pool Pump, 20 HP, 208-230/460V | NB715-1020F-016
-
Speck Pumps Normblock Multi Series Commercial Pool Pump, 20 HP, 208-230/460V, Three Phase | NB715-1020F-000
-
Speck Pumps Normblock Multi Series Commercial Pool Pump, 15 HP, 208-230/460V, Three Phase | NB715-1015F-000
-
Speck Pumps Model 95-XI Commercial Pool Pump, 10 HP, 208-230/460V, Three Phase, TEFC | IG273-1100F-000
-
Speck Pumps Model 95-X Commercial Pool Pump, 7.5 HP, 208-230V, Single Phase | IG274-1750F-000
-
Speck Pumps Model 95-IX Commercial Pool Pump, 5 HP, 208-230V, Single Phase, TEFC | IG274-1500F-000
-
Speck Pumps Model 95-X Commercial Pool Pump, 7.5 HP, 208-230/460V, Three Phase, TEFC | IG273-1750F-000
-
Speck Pumps Model 95-IX Commercial Pool Pump, 5 HP, 208-230/460V, Three Phase, TEFC | IG273-1500F-000