Product Overview
The Speck Pumps Model 95-X (IG273-1750F-000) is a 7.5 HP, single-speed commercial pool pump with a three-phase 208-230/460V TEFC motor. Its one-piece plastic housing with integrated strainer basket and 4 in quick-disconnect unions gives medium-head, high-flow performance for commercial pools, large residential pools, high-rate sand filter systems and water features such as waterfalls and negative edges.
⚠️ Important Purchase Notice
This is a three-phase commercial pump. It must be installed by a licensed electrician or qualified pool contractor with a properly sized motor starter or drive, following the Speck manual and local codes. At about 124 lb it ships by freight; local pickup is available in Henderson, Nevada. Inspect the shipment upon arrival and report damage promptly.
WARNING: This product can expose you to chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.
Ideal For
- Commercial and semi-commercial pools.
- Large residential pools that need high flow.
- High-rate sand filter systems.
- Waterfalls, negative edges and other water features.
- Replacing several smaller pumps with one high-flow pump.
Key Features
- Large one-piece plastic housing with integrated strainer basket.
- Easy on/off two-piece lid for basket access.
- 4 in quick-disconnect unions on suction and discharge.
- Mechanical shaft seal that lets the pump run dry for up to one hour.
- Heavy-duty, energy-efficient TEFC (totally enclosed fan-cooled) motor, 1.15 service factor.
- Motor removes without disturbing the plumbing.
- Reusable O-rings throughout.
- Suitable for salt pools up to 5,000 ppm.
- Performance tested at the Speck factory before shipping.
Benefits
- High flow from a single plastic pump, with quiet, efficient medium-head operation.
- Quick-disconnect unions and an easy-off lid cut service time.
- Dry-run tolerance protects the seal if the pump loses prime.
- Plastic housing holds up to pool chemicals and outdoor exposure.
Compatibility
Requires three-phase power at 208-230V or 460V (19-18/8.9 A) and 4 in plumbing connections. Confirm the part number IG273-1750F-000, your available voltage and phase, required flow and head, and equipment-pad space before ordering. A single-phase version is sold separately as IG274-1750F-000.
Installation or Upgrade Context
Set the pump on a level pad, connect suction and discharge with the 4 in unions, and have the motor wired to a correctly sized three-phase starter or drive. Prime the strainer housing, check rotation, and confirm flow before putting the system into service.
What’s Included
- Speck Model 95-X 7.5 HP three-phase pump with TEFC motor
- Integrated strainer basket and two-piece lid
- 4 in quick-disconnect unions
- Wrench for unions and lid
Specifications
| Specification | Details |
|---|---|
| Manufacturer | Speck Pumps |
| Product Type | Commercial pool pump, single speed |
| SKU / Model | IG273-1750F-000 (Model 95-X) |
| Horsepower | 7.5 HP, 1.15 service factor |
| Voltage / Amps | 208-230/460V, 19-18/8.9 A |
| Phase | Three phase |
| Motor Enclosure | TEFC |
| Union Size | 4 in quick-disconnect |
| Housing Material / Color | Plastic / Black |
| Application | Commercial and large residential pools, water features |
| Country of Origin | United States |
| Shipping Dimensions | 34 x 13 x 19 in |
| Shipping Weight | 124 lb |
| Warranty | 2 years |
Warranty
Covered by Speck’s 2-year manufacturer warranty, subject to the manufacturer’s terms. Pool Supply Depot can provide proof of purchase for warranty claims.
Customer Q&A
Can I run this pump on single-phase power?
No. This model needs three-phase power. The single-phase version is IG274-1750F-000.
What happens if the pump loses prime?
Its mechanical shaft seal is designed to run dry for up to one hour, giving you time to restore prime.
Can I use it on a saltwater pool?
Yes, with salt levels up to 5,000 ppm.
Is a wrench included?
Yes. A wrench for the unions and lid comes with the pump.
Speck Pumps Model 95-X Commercial Pool Pump, 7.5 HP, 208-230/460V, Three Phase, TEFC | IG273-1750F-000
| Specification | Details |
|---|---|
| Manufacturer | Speck Pumps |
| Product Type | Commercial pool pump, single speed |
| SKU / Model | IG273-1750F-000 (Model 95-X) |
| Horsepower | 7.5 HP, 1.15 service factor |
| Voltage / Amps | 208-230/460V, 19-18/8.9 A |
| Phase | Three phase |
| Motor Enclosure | TEFC |
| Union Size | 4 in quick-disconnect |
| Housing Material / Color | Plastic / Black |
| Application | Commercial and large residential pools, water features |
| Country of Origin | United States |
| Shipping Dimensions | 34 x 13 x 19 in |
| Shipping Weight | 124 lb |
| Warranty | 2 years |
More Pool Pumps
Shop all Pool Pumps →-
Pentair IntelliFlo3 VSF 3.0HP with I/O Relay Board | 011076
-
Pentair IntelliFlo3 VSF Variable Speed Pool Pump 3 HP | 011075
-
Pentair WhisperFlo VST 2.6HP Variable Speed Pool Pump | 011533
-
Pentair SuperFlo VST Variable Speed Pump 2.2 THP | 342002
-
Pentair IntelliFloXF VSF Variable Speed Pump 3.95 THP | 022056
-
Pentair IntelliFlo3 VSF 1.5HP Pool Pump with I/O Board | 011066
-
AquaStar Pipeline Smart Model Variable Speed Pump, 3 HP, 230 V | PLP300S
-
Pentair SuperFlo High Performance Pump Single Speed 1.1 THP | 348190