Product Overview
The Hayward IDXLTER1930 thermistor is the water temperature sensor for Hayward H-Series Low NOx induced-draft (IDL2) heaters and H150-H400 electronic ignition (ED2 style) pool and spa heaters. It reads the water temperature and reports it to the heater control board, so the heater knows when to fire and when to shut off.
⚠️ Important Purchase Notice
Hayward has made this part obsolete, and supply is limited. Hayward lists the H-Series thermistor FDXLTER1930 as its replacement. Check your heater model and revision on the rating plate before ordering.
Turn off power and gas before servicing the heater. Heater repairs should be done by a qualified technician. Please inspect your shipment on arrival and report any damage promptly.
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Ideal For
- Hayward H-Series Low NOx IDL2 heaters (H250IDL2, H350IDL2, H400IDL2)
- Hayward H-Series electronic ignition heaters H150-H400 (ED2 style)
- Heaters showing a sensor or water-temperature fault
- Service techs repairing H-Series heaters
Key Features
- Water temperature thermistor for H-Series heaters
- Genuine Hayward replacement part
- Fits H150-H400 IDL / ED2 / P1 / PED2 versions
- Compact part, about 0.14 lb
Benefits
- A failed thermistor can cause wrong temperature readings or keep the heater from running; replacing it restores accurate heating control.
- Using the Hayward part number for your heater version avoids guesswork compared with generic sensors.
Compatibility
Fits Hayward H-Series Electronic ED2 style, Low NOx induced-draft heaters H250IDL2, H350IDL2 and H400IDL2, and electronic ignition H150, H200, H210, H250, H300, H350 and H400 pool and spa heaters (IDL1 / IDL2 / IDPL, ED2, P1 and PED2 versions). Universal H-Series FD heaters (H150FD-H400FD) use thermistor FDXLTER1930. Please confirm the part number for your heater before ordering.
Installation or Upgrade Context
Replace the thermistor when the heater shows a sensor fault, reads the water temperature incorrectly or will not fire. Turn off power and gas, remove the old sensor from the heater header, install the new thermistor in the same position and reconnect it to the control board harness.
What’s Included
- (1) Hayward IDXLTER1930 heater thermistor
Specifications
| Specification | Details |
|---|---|
| Manufacturer | Hayward |
| Product Type | Heater Thermistor / Temperature Sensor |
| SKU / Model | IDXLTER1930 |
| Product Line | H-Series |
| Measures | Water temperature |
| Compatible models | H250IDL2, H350IDL2, H400IDL2; H150-H400 electronic ignition (ED2, P1, PED2) |
| Not For | H-Series FD / Universal H-Series (use FDXLTER1930) |
| Application | Pool and spa / hot tub heaters, in-ground pools |
| Shipping Dimensions | 2.69 x 2.48 x 2.05 in |
| Shipping Weight | 0.14 lb |
| Warranty | 1 year (parts) |
| UPC / Barcode | 0610377626385 |
Warranty
Covered by Hayward's 1-year parts warranty, subject to the manufacturer's terms. Pool Supply Depot can provide proof of purchase for warranty claims.
Customer Q&A
Does this fit my H400FD heater?
No. Universal H-Series FD models use thermistor FDXLTER1930.
What does the thermistor do?
It measures the water temperature and reports it to the heater control board.
Which heaters does it fit?
H-Series Low NOx IDL2 heaters and H150-H400 electronic ignition heaters (ED2, P1 and PED2 versions).
Is this part still made?
Hayward has made IDXLTER1930 obsolete and supply is limited. Hayward lists FDXLTER1930 as the replacement.
Is it a genuine Hayward part?
Yes, IDXLTER1930 is a Hayward part number.
Hayward H-Series Heater Temperature Sensor Thermistor, IDL2 / ED2 | IDXLTER1930
| Specification | Details |
|---|---|
| Manufacturer | Hayward |
| Product Type | Heater Thermistor / Temperature Sensor |
| SKU / Model | IDXLTER1930 |
| Product Line | H-Series |
| Measures | Water temperature |
| Compatible models | H250IDL2, H350IDL2, H400IDL2; H150-H400 electronic ignition (ED2, P1, PED2) |
| Not For | H-Series FD / Universal H-Series (use FDXLTER1930) |
| Application | Pool and spa / hot tub heaters, in-ground pools |
| Shipping Dimensions | 2.69 x 2.48 x 2.05 in |
| Shipping Weight | 0.14 lb |
| Warranty | 1 year (parts) |
| UPC / Barcode | 0610377626385 |
More Pool Equipment Sensors & Thermistors
Shop all Pool Equipment Sensors & Thermistors →-
Pentair Air & Water Temperature Sensor, 10K Thermistor, 20 ft Cable | 520272
-
Pentair IntelliChem ORP Sensor | 522187
-
Pentair Heater Thermistor for MasterTemp & Sta-Rite Max-E-Therm, Water Temperature Sensor | 42001-0053S
-
Pentair IntelliChem pH Sensor | 522186Z
-
Pentair SolarTouch Solar Control System, Power Center/Control Panel, 3-Way Solar drain-down, 2 Temp Sensors (20' water, 40" solar) | 521592
-
Pentair Stack Flue Sensor for MasterTemp & Sta-Rite Max-E-Therm Heaters | 42002-0024S
-
Jandy Levolor with Sensor 100' and 1" Valve Series K1100 | K1100CKC
-
Pentair IntelliChem ORP Sensor | 522187Z