Product Overview
The Hayward HeatPro MCHX W3HP21405T is a 140,000 BTU electric pool heat pump designed to provide efficient, dependable heating for in-ground swimming pools. Its advanced microchannel heat-exchanger technology improves durability, reduces refrigerant requirements, and provides strong heating performance in cooler outdoor conditions.
This heat-only model uses a single-speed compressor and operates on a 220/240V, single-phase electrical supply. A patent-pending defrost algorithm helps maintain heating capacity when ambient temperatures fall below 50°F, allowing pool owners to extend their swimming season.
The microchannel coil features a durable structure designed to resist fin damage during installation and exposure to outdoor conditions. Hayward’s Trivalent Chromium Process coating provides enhanced corrosion resistance for long-term operation in demanding climates. The reduced number of brazed joints also minimizes potential refrigerant-leak points compared with traditional coil construction.
The W3HP21405T can be integrated with compatible Hayward Omni automation through a low-voltage relay, allowing convenient temperature management and scheduling. This is the Open Line W3 version and includes a one-year parts-only manufacturer warranty with no labor coverage.
Key Features
- 140,000 BTU heating capacity
- Heat-only operation
- Advanced Hayward MCHX microchannel technology
- Improved heating performance in cool weather
- Low-ambient operation down to approximately 40°F
- Corrosion-resistant TCP-coated coil construction
- Robust coil design helps protect against fin damage
- Approximately 85% fewer brazed joints than traditional designs
- Reduced refrigerant requirements
- Single-speed compressor
- Compatible with Hayward Omni automation
- Designed for new pool construction and renovation projects
- Suitable for in-ground swimming pools
Benefits
- Extends the usable swimming season
- Provides efficient electric pool heating without natural gas or propane
- Helps maintain a comfortable and consistent pool temperature
- Durable construction supports long-term outdoor use
- Reduced coil complexity lowers potential leak opportunities
- Automation compatibility provides convenient temperature scheduling
- Lighter design simplifies transport and equipment-pad installation
Specifications
| Specification | Details |
|---|---|
| Manufacturer | Hayward |
| Product Series | HeatPro MCHX |
| Manufacturer Part Number | W3HP21405T |
| Product Type | Electric Pool Heat Pump |
| Operation | Heat Only |
| Heating Capacity | 140,000 BTU/hr |
| Equivalent Heating Output | 40 kW |
| Pool Type | In-Ground |
| Voltage | 220/240V |
| Frequency | 60 Hz |
| Electrical Phase | Single Phase |
| Compressor | Single-Speed |
| Maximum Breaker Size | 50 Amps |
| Minimum Operating Temperature | 40°F |
| Cooling Capability | No |
| Active Defrost | No |
| Low-Ambient Operation | Yes |
| Product Dimensions | 33.6" L × 30.5" W × 44" H |
| Product Weight | Approximately 233 lb |
| Rear Clearance | 12" |
| Side Clearance | 12" |
| Vertical Clearance | 72" |
| SKU | W3HP21405T |
| Barcode / GTIN | 610377424523 |
The specifications above are published by Hayward for the W3HP21405T Open Line model.
Installation Information
Professional installation is strongly recommended. The heat pump requires a properly sized dedicated electrical circuit, correct bonding and grounding, adequate water flow, and sufficient ventilation clearance.
Maintain at least 12 inches of clearance around the rear and sides of the unit and 72 inches of unobstructed vertical clearance. A plumbing bypass is not mandatory when water flow remains below 75 GPM, but a bypass may help optimize flow and heating efficiency.
Confirm Before Ordering
Confirm the following before purchase:
- A heat-only model is required
- The pool has a compatible 220/240V single-phase electrical supply
- A maximum 50-amp breaker is appropriate for the installation
- The equipment pad provides the required ventilation clearances
- The 140,000 BTU capacity is properly sized for the pool
- Professional electrical and plumbing installation is available
Heat-pump sizing depends on pool volume, surface area, desired temperature, local climate, wind exposure, and whether a pool cover is used.
Warranty Information
The W3HP21405T is an Open Line W3 product and carries a one-year parts-only limited manufacturer warranty. Labor coverage is not included. Warranty eligibility is subject to Hayward’s current terms, proof-of-purchase requirements, and proper installation.
Customer Q&A
Does this model cool the pool?
No. The W3HP21405T is a heat-only model.
Can it operate in cooler weather?
Yes. It is designed for low-ambient operation down to approximately 40°F, although heating performance varies with outdoor temperature and humidity.
Can it connect to Hayward Omni automation?
Yes. It can be controlled through a compatible Omni system using a two-wire connection to a low-voltage relay.
Is this a gas heater?
No. This is an electric pool heat pump requiring a 220/240V electrical connection.
What warranty comes with the W3 version?
The Open Line W3 version includes a one-year parts-only warranty with no labor coverage.