⚠️ Important Purchase Notice

This product is intended to be purchased and installed by pool professionals. Product support is not provided to homeowners.

Returns are not accepted on this or any electronic equipment.

Damages to product from shipping will be covered and must be reported promptly.

To prevent possible damage during transit, we strongly recommend selecting 2nd Day Shipping.

By purchasing this item, you agree to the terms above.

Product Overview

The Jandy AquaLink RS P4 Pool Only Kit with iAquaLink RS Web-Connect Device | IQ904-P is a professional-grade pool automation kit designed to control a single-body pool-only system. This kit gives pool professionals a complete automation platform for managing compatible pool equipment such as pumps, lights, cleaners, heaters, and water features.

The included iAquaLink RS Web-Connect Device allows compatible systems to be controlled from a smartphone, tablet, or web-connected device when properly installed and configured. Jandy describes AquaLink RS kits as app-enabled automation systems for controlling pool or spa equipment, and notes that additional interfaces such as spa-side or in-house remotes are sold separately.

This is a P4 pool-only automation kit, meaning it is intended for pool systems only, not shared pool/spa combinations. Always confirm the required body-of-water configuration, relay count, power center requirements, equipment compatibility, and installation plan before ordering.

Ideal For

Pool professionals installing Jandy automation systems
Pool-only systems with one body of water
Customers upgrading from manual timers and switches
App-based pool control through iAquaLink
Managing compatible pumps, lights, heaters, cleaners, and water features
Equipment pads requiring up to 4 relay control capability
New automation installations
Replacing or upgrading compatible AquaLink RS pool-only systems

What’s Included

Jandy AquaLink RS P4 pool-only automation system components
iAquaLink RS Web-Connect Device
RS system board / power center electronics included with manufacturer kit
Relays included with manufacturer kit
Temperature sensors included with manufacturer kit
Manufacturer-supplied installation documentation and packaging

What’s Not Included

Pool/spa combination control
Valve actuators unless specifically included by manufacturer packaging
Spa-side remote
In-house wall remote
Additional user interfaces
Additional relays beyond included kit capacity
Salt chlorinator unless separately specified
Pump, heater, filter, or lights
Electrical wiring materials
Breaker or disconnect
Internet router, Wi-Fi extender, or network equipment
Installation labor
Professional programming or startup service

Compatibility Guidance

The Jandy IQ904-P is designed for compatible pool-only AquaLink RS automation installations.

Before ordering, confirm the following:

You need model IQ904-P.
Your system is pool-only, not pool/spa.
Your automation needs match a P4 / RS4-style control configuration.
Your equipment list fits within the available relay and control capacity.
Your pumps, lights, heater, cleaner, and water features are compatible with AquaLink RS control.
Your site has suitable internet access for iAquaLink web/app control.
Your equipment pad and electrical layout can support the power center and wiring requirements.
Additional interfaces, valve actuators, relays, or automation accessories are purchased separately if needed.
A qualified pool professional or licensed electrician will install and program the system.

Do not order this automation kit by part number alone. AquaLink systems must match the body-of-water configuration, relay count, equipment type, voltage/control requirements, and desired automation features.

Confirm Before Ordering

Before purchasing, please verify:

You need the Jandy IQ904-P kit.
You need pool-only automation.
You do not need pool/spa combination automation.
Your system equipment can be controlled within the P4 kit configuration.
Your installer has confirmed relay needs, equipment wiring, and system layout.
Your internet connection is suitable for iAquaLink control.
You understand additional user interfaces and accessories may be sold separately.
You understand returns are not accepted on this or any electronic equipment.
You have reviewed and agree to the Important Purchase Notice listed above.

Key Features

Genuine Jandy AquaLink RS automation kit
Model IQ904-P
Pool-only P4 automation configuration
Includes iAquaLink RS Web-Connect Device
Remote control from compatible smartphone, tablet, or web-connected device
Supports control of compatible pool equipment
Useful for pumps, lighting, heaters, cleaners, and water features
Designed to replace or reduce reliance on manual timers and switches
Expandable Jandy automation platform
Professional installation and programming required
Product support not provided to homeowners
Returns not accepted on electronic equipment

Benefits

The Jandy AquaLink RS P4 Pool Only Kit helps simplify pool equipment operation by centralizing control into one automation system. Instead of manually operating timers, switches, and equipment at the pad, compatible pool functions can be scheduled, controlled, and monitored through AquaLink RS and iAquaLink when properly installed.

The included iAquaLink RS Web-Connect Device gives users convenient remote access through compatible connected devices. This can make it easier to adjust schedules, turn pool equipment on or off, manage lighting, and monitor system operation.

For pool professionals, the IQ904-P provides a strong automation solution for pool-only applications where the required equipment fits within a P4 configuration.

Pool-Only vs. Pool/Spa Automation

This model is intended for pool-only systems.

A pool-only automation system controls one body of water, such as a swimming pool without shared spa operation.

A pool/spa automation system is used when a pool and spa share equipment and require valve automation, spa mode, heater control logic, and different body-of-water operation.

Choose IQ904-P only when your installation is a pool-only setup. If the system includes a shared pool/spa combination, a different AquaLink RS configuration may be required.

Recommended Use

Use the Jandy IQ904-P when a pool professional has specified a Jandy AquaLink RS pool-only automation kit with iAquaLink web/app control.

This kit is best suited for pool-only systems where automation is needed for compatible equipment such as filtration pumps, pool lights, cleaners, heaters, and water features.

For pool/spa combinations, higher relay needs, salt integration, additional actuators, or expanded control requirements, a different Jandy automation package or additional accessories may be needed.

Installation Notes

This automation kit should be installed by a qualified pool professional or licensed electrician. Installation may involve high-voltage wiring, low-voltage control wiring, relay wiring, sensor installation, power center setup, network setup, iAquaLink configuration, equipment programming, and startup testing.

Professional installation is required to ensure:

Correct automation kit selection
Proper pool-only configuration
Correct relay wiring
Safe high-voltage and low-voltage wiring
Proper bonding and grounding verification
Correct temperature sensor installation
Compatible equipment control setup
Proper iAquaLink Web-Connect configuration
Reliable internet/network connection
Safe startup and system testing

Improper installation may cause equipment damage, automation failure, electrical hazards, communication problems, or voided warranty coverage.

Important Electronic Equipment Notice

This kit contains electronic automation components and must be handled carefully. Inspect the product immediately upon delivery. Any shipping damage must be reported promptly.

Returns are not accepted on this or any electronic equipment.

To help reduce transit risk, 2nd Day Shipping is strongly recommended.

Technical Specifications

Customer-Facing Q&A

Q: What is the Jandy IQ904-P used for?
A: It is a Jandy AquaLink RS P4 automation kit for compatible pool-only systems, with iAquaLink web/app control.

Q: Is this for pool-only or pool/spa systems?
A: This model is for pool-only systems. It is not intended for shared pool/spa combinations.

Q: Does this include iAquaLink?
A: Yes. This kit includes the iAquaLink RS Web-Connect Device.

Q: Can I control my pool from my phone?
A: Yes, when properly installed and configured with a compatible internet connection and iAquaLink setup.

Q: What does P4 mean?
A: P4 refers to the pool-only automation configuration and relay/control capacity. Your installer should confirm whether this configuration supports all equipment you want to automate.

Q: Does this include valve actuators?
A: Valve actuators are not included unless specifically supplied by manufacturer packaging. Confirm with your supplier before purchasing.

Q: Does this include a salt chlorinator?
A: No. This listing is for the AquaLink RS P4 pool-only kit with iAquaLink Web-Connect. A salt chlorinator is not included unless separately specified.

Q: Does this include additional remotes or wall panels?
A: Additional user interfaces, spa-side remotes, and in-house remotes are sold separately unless specifically included.

Q: Who should purchase and install this kit?
A: This product is intended to be purchased and installed by pool professionals.

Q: Is product support provided to homeowners?
A: No. Product support is not provided to homeowners for this item.

Q: Can this product be returned?
A: No. Returns are not accepted on this or any electronic equipment.

Q: What if the product is damaged during shipping?
A: Shipping damage will be covered but must be reported promptly after delivery.

Q: What shipping method is recommended?
A: To help prevent possible damage during transit, 2nd Day Shipping is strongly recommended.

Q: What should I check before ordering?
A: Confirm that you need IQ904-P, that your system is pool-only, that your equipment fits the P4 configuration, and that your pool professional has verified compatibility.