Product Overview

The Jandy Levolor K-2000 K2000CKC is an electronic water-level management system designed for vanishing-edge pools, perimeter-overflow pools, fountains, and other applications where maintaining a consistent water level is critical.

The K-2000 monitors both normal and high-water conditions and automatically controls filling to maintain the proper operating level. For vanishing-edge applications, the high-level switching function can be used to activate the edge pump and fill the catch basin so the system can properly test and maintain water level.

This K2000CKC package includes a wall-mounted controller, 100-foot sensor lead with an 18-inch slip-style sensor, and a 1-inch solenoid fill valve.

Key Features

Electronic Water-Level Control

Automatically monitors water conditions and adds water when necessary, helping maintain a consistent operating level without relying on a mechanical float.

High-Level Switching

Designed specifically for applications requiring high-water-level detection, including vanishing-edge and perimeter-overflow pools.

100' Slip-Style Sensor

Includes a 100-foot sensor lead with an 18-inch slip-style sensor intended for installation in a static pipe or standpipe application.

1" Solenoid Valve Included

The complete K2000CKC configuration includes a 1-inch solenoid valve for controlling the incoming makeup-water supply.

Wave Compensation

Electronic sensing helps compensate for waves and water movement, reducing unnecessary cycling caused by temporary fluctuations in water level.

Overfill Protection

Built-in control logic and a time-out sequence help prevent excessive filling and can help avoid masking a potential water leak.

110/220V Compatible

The controller is factory configured for 220V operation and can be field-adjusted for 110V installations.

Benefits

• Maintains a consistent pool or catch-basin water level
• Excellent for vanishing-edge and perimeter-overflow systems
• Automatically replaces water lost through evaporation and splash-out
• No mechanical float or other moving water-level components
• Helps reduce unnecessary manual filling
• Suitable for new construction and existing equipment installations
• Wall-mounted controller keeps electronics conveniently located at the equipment area
• Designed for professional pool installations

Specifications

Installation Information

The slip-style sensor is designed for use in a static pipe or standpipe and installs into 1-inch PVC. The final water-level setting is determined by the sensor's installed position.

A suitable 24VDC relay is required when the K-2000 is being used to operate the associated vanishing-edge pump. The relay is not included with K2000CKC and must be ordered separately.

Installation and electrical work should be completed by a qualified pool professional in accordance with Jandy instructions and applicable electrical and plumbing codes.

Confirm Before Ordering

Before purchasing, verify:

• Manufacturer part number K2000CKC
• 100-foot sensor lead is appropriate for the installation
• 18-inch slip-style sensor is suitable for the static pipe/standpipe configuration
• 1-inch fill valve matches the plumbing design
• Required 24VDC pump relay is available separately
• Existing electrical supply and installation meet Jandy requirements

Electronic pool-control equipment should be matched by exact model and application before ordering.

Warranty Information

Warranty eligibility is subject to current Jandy/Fluidra warranty terms, installation requirements, application, and method of purchase. Jandy equipment should be installed and serviced by a qualified pool professional.

⚠️ Important Purchase Notice: This product is intended to be purchased and installed by pool professionals. Product support is not provided to homeowners. Returns are not accepted on this or any electronic equipment. Damages to product from shipping will be covered and must be reported promptly. By purchasing this item, you agree to the terms above.

Customer Q&A

What is the Jandy K2000CKC used for?

It is designed to automatically manage water level while also providing high-level switching for applications such as vanishing-edge pools, perimeter-overflow pools, and fountains.

Does K2000CKC include the sensor?

Yes. It includes a 100-foot lead with an 18-inch slip-style sensor.

Is the 1-inch valve included?

Yes. K2000CKC includes a 1-inch solenoid fill valve.

Can it operate on 110V?

Yes. The controller supports 110/220V operation. It is factory configured for 220V and can be field-adjusted for 110V.

Does it include the pump relay?

No. A suitable 24VDC relay required for pump operation must be purchased separately.

Is this the same as the standard Levolor fill-only system?

No. The K-2000 incorporates a high-level switching function intended for applications such as vanishing-edge pools. Confirm the exact Levolor model required before ordering.