Thank you
Product Overview
The Pentair 520272 Air & Water Temperature Sensor is a genuine Pentair replacement temperature sensor with a 10K-ohm thermistor and 20-foot cable, used to read air, water or solar temperature on Pentair and Compool pool and spa automation systems.
Compatible with Intellitouch, EasyTouch, SunTouch, and Compool pool and spa control systems; Includes a 10K-Ohm thermistor and 20-foot cable.
This is a OEM replacement part #520272
Ideal For
Replacing a failed air, water or solar temperature sensor on a Pentair or Compool automation system
Adding a solar or air temperature input to a compatible control system
Key Features
Genuine Pentair OEM part: part number 520272.
10K-ohm thermistor: the sensor type used by Pentair and Compool automation controls.
20-foot cable: reaches from the equipment pad to the control panel in typical installations.
IP67 enclosure rating.
Specifications
| Specification | Details |
|---|---|
| Brand | Pentair |
| Part Number | 520272 |
| UPC | 788379654269 |
| Sensor Type | 10K-ohm thermistor (air / water / solar) |
| Cable Length | 20 ft |
| Enclosure Rating | IP67 |
| Operating Temperature | -20 °C to 100 °C |
| Compatible Models | Pentair IntelliTouch, EasyTouch, SunTouch; Compool CP3400, CP3600, CP3800, CP3810, CP1000, CP2000, CP3000, CP30, CP100; LX100EZT, LX100EZTL |
| Weight | 0.2 lb |
Warranty & Compatibility
Compatibility Notes
The 520272 is used with Pentair IntelliTouch, EasyTouch and SunTouch control systems and Compool controls including CP3400, CP3600, CP3800, CP3810, CP1000, CP2000, CP3000, CP30 and CP100. Confirm that your control system uses a 10K-ohm thermistor sensor before ordering.
Installation Notes
Turn off power to the control system before connecting the sensor. Water sensors are installed in the plumbing (typically after the filter and before the heater); air sensors should be mounted out of direct sunlight. Route the cable to the control panel's sensor terminals and connect according to the control system's installation manual.
Customer-Facing Q&A
Q: What is the part number?
A: Pentair part number 520272.
Q: What is the UPC?
A: 788379654269.
Q: Which control systems does it work with?
A: Pentair IntelliTouch, EasyTouch and SunTouch, and Compool control systems such as the CP3400, CP3600, CP3800 and CP3810.
Q: Can it be used as an air, water or solar sensor?
A: Yes. The 520272 is a 10K-ohm thermistor sensor used for air, water or solar temperature inputs.
Q: How long is the cable?
A: 20 feet.
Pentair Air & Water Temperature Sensor 20FT Cable | 520272
$65.00
Shipping calculated at checkout.
| Specification | Details |
|---|---|
| Brand | Pentair |
| Part Number | 520272 |
| UPC | 788379654269 |
| Sensor Type | 10K-ohm thermistor (air / water / solar) |
| Cable Length | 20 ft |
| Enclosure Rating | IP67 |
| Operating Temperature | -20 °C to 100 °C |
| Compatible Models | Pentair IntelliTouch, EasyTouch, SunTouch; Compool CP3400, CP3600, CP3800, CP3810, CP1000, CP2000, CP3000, CP30, CP100; LX100EZT, LX100EZTL |
| Weight | 0.2 lb |
More Pool Equipment Sensors & Thermistors
Shop all Pool Equipment Sensors & Thermistors →-
Pentair IntelliChem ORP Sensor | 522187
-
Pentair Water and Temperature Sensor Kit | 520872
-
Pentair MasterTemp/Sta-Rite Pool Heater Thermistor | 42001-0053S
-
Pentair SolarTouch Solar Control System, Power Center/Control Panel, 3-Way Solar drain-down, 2 Temp Sensors (20' water, 40" solar) | 521592
-
Pentair IntelliChem pH Sensor | 522186Z
-
Pentair 42002-0024S. Strack Flue Sensor for Sta-Rite MasterTemp MaxE-Therm. Replacement Part
-
Jandy Levolor with Sensor 100' and 1" Valve Series K1100 | K1100CKC
-
Pentair Probe Thermistor MX NT – 471566Z
