Product Overview

Improve pool water quality and reduce the burden placed on the primary sanitizer with the A&A Manufacturing QuikPure3 Ozone System. Designed for residential inground pools containing up to 25,000 gallons, the QuikPure3 introduces ozone into the circulation system to oxidize organic contaminants, oils, chloramines, and other impurities.

Ozone is a powerful supplemental oxidizer that helps break down contaminants responsible for unpleasant chlorine odors, eye irritation, cloudy water, and buildup around the pool. After completing the oxidation process, ozone naturally converts back into oxygen without leaving unwanted chemical residues.

The QuikPure3 operates automatically whenever the pool circulation pump is running. This stand-pipe configuration includes a convenient vertical mounting arrangement and is designed for straightforward integration with compatible pool circulation and filtration systems.

This system does not replace chlorine, bromine, salt chlorination, or another EPA-approved residual sanitizer. It works alongside the primary sanitation system to improve oxidation and overall water quality.

How It Works

The QuikPure3 uses ultraviolet technology to generate ozone. The circulation system draws the ozone into the water stream, where it reacts with contaminants and helps break down chloramines, oils, greases, and other oxidizable materials.

The system runs automatically when the pool pump operates. A visible blue-green glow indicates that the UV lamp is functioning, while air bubbles returning to the pool can indicate that ozone-enriched air is being introduced into the circulation system.

Key Features

Designed for pools up to 25,000 gallons

Supplemental ozone oxidation system

Complete stand-pipe configuration

Supports 115V or 230V electrical installation

Single-lamp ozone-generation design

Convenient plug-in ultraviolet lamp

Visual operating indicator

Built-in safety shutoff feature

Simple valveless input controller

Automatically operates with the circulation pump

Helps reduce chloramines and unpleasant odors

Helps break down oils and organic contaminants

May reduce demand on the primary sanitizer

Aluminum equipment housing

Suitable for residential inground pools

Specifications

The 381100 is also referenced under Pentair In-Floor part number 556625. Published package information identifies a single lamp, ballast, orifice/check-valve assembly, and stand-pipe configuration.

Package Contents

• QuikPure3 ozone generator
• Stand-pipe assembly
• One ultraviolet lamp
• One ballast
• Orifice and check-valve assembly
• Required factory tubing and connection components

Contents may vary by manufacturing revision. Confirm the factory carton before installation.

Warranty & Compatibility

Installation Information

Professional installation by a qualified pool technician or licensed electrician is recommended. The installer must confirm the correct voltage, electrical protection, injector placement, tubing arrangement, check-valve orientation, stand-pipe positioning, and compatibility with the existing circulation system.

The system uses a bare electrical cord and must be wired according to the manufacturer’s instructions and applicable electrical codes. The unit should be installed in a protected, properly ventilated equipment area.

Warranty Information

A&A Manufacturing provides a two-year limited warranty to the original purchaser against defects in materials and workmanship. Proof of purchase is required. Damage caused by freezing, negligence, improper installation, misuse, or improper care is excluded. Labor, removal, transportation, and reinstallation costs are not covered.