Product Overview
The Speck Pumps Model 95-IX (IG274-1500F-000) is a 5 HP commercial pool pump with a 208-230V single-phase TEFC motor, for sites that need high flow without three-phase service. Its one-piece plastic housing with integrated strainer basket and 4 in quick-disconnect unions gives medium-head, high-flow performance for commercial and semi-commercial pools, large residential pools and water features such as waterfalls and negative edges.
⚠️ Important Purchase Notice
Installation should be done by a licensed electrician or qualified pool contractor, following the Speck manual and local codes. This motor draws 24.9/23 A, so confirm breaker and wire size before installing. At about 133 lb it ships by freight. Inspect the shipment upon arrival and report damage promptly.
WARNING: This product can expose you to chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.
Ideal For
- Commercial and semi-commercial pools with single-phase power.
- Large residential pools that need high flow.
- Waterfalls, negative edges and other water features.
- Replacing several smaller pumps with one high-flow pump.
Key Features
- 5 HP, 112-frame TEFC (totally enclosed fan-cooled) motor for 208-230V single-phase power.
- Large one-piece plastic housing with integrated strainer basket.
- Easy on/off two-piece lid for basket access.
- 4 in quick-disconnect unions on suction and discharge.
- Mechanical shaft seal that lets the pump run dry for up to one hour.
- Motor removes without disturbing the plumbing; reusable O-rings throughout.
- Suitable for salt pools up to 5,000 ppm.
- Performance tested at the Speck factory before shipping.
Benefits
- Commercial-level flow without needing three-phase service.
- Quiet, efficient medium-head operation.
- Quick-disconnect unions and an easy-off lid cut service time.
- Dry-run tolerance protects the seal if the pump loses prime.
Compatibility
Requires 208-230V single-phase power (24.9/23 A) and 4 in plumbing connections. Confirm the part number IG274-1500F-000, breaker and wire size, required flow and head, and equipment-pad space before ordering. A three-phase version is sold separately as IG273-1500F-000.
Installation or Upgrade Context
Set the pump on a level pad, connect suction and discharge with the 4 in unions, and have the motor wired to a correctly sized single-phase circuit. Prime the strainer housing and confirm flow before putting the system into service.
What’s Included
- Speck Model 95-IX 5 HP single-phase pump with TEFC motor
- Integrated strainer basket and two-piece lid
- 4 in quick-disconnect unions
- Wrench for unions and lid
Specifications
| Specification | Details |
|---|---|
| Manufacturer | Speck Pumps |
| Product Type | Commercial pool pump |
| SKU / Model | IG274-1500F-000 (Model 95-IX) |
| Horsepower | 5 HP |
| Voltage / Amps | 208-230V, 24.9/23 A |
| Phase | Single phase |
| Motor Enclosure | TEFC, 112 frame |
| Union Size | 4 in quick-disconnect |
| Housing Material | Plastic |
| Application | Commercial and large residential pools, water features |
| Country of Origin | United States |
| Shipping Dimensions | 38 x 28 x 26 in |
| Shipping Weight | 133 lb |
| Warranty | 2 years |
Warranty
Covered by Speck’s 2-year warranty on the motor and all pump parts, including normal wear of the mechanical seal, subject to the manufacturer’s terms. Pool Supply Depot can provide proof of purchase for warranty claims.
Customer Q&A
Do I need three-phase power for this pump?
No. This model runs on 208-230V single-phase power. The three-phase version is IG273-1500F-000.
What happens if the pump loses prime?
Its mechanical shaft seal is designed to run dry for up to one hour, giving you time to restore prime.
Can I use it on a saltwater pool?
Yes, with salt levels up to 5,000 ppm.
Is a wrench included?
Yes. A wrench for the unions and lid comes with the pump.
Speck Pumps Model 95-IX Commercial Pool Pump, 5 HP, 208-230V, Single Phase, TEFC | IG274-1500F-000
| Specification | Details |
|---|---|
| Manufacturer | Speck Pumps |
| Product Type | Commercial pool pump |
| SKU / Model | IG274-1500F-000 (Model 95-IX) |
| Horsepower | 5 HP |
| Voltage / Amps | 208-230V, 24.9/23 A |
| Phase | Single phase |
| Motor Enclosure | TEFC, 112 frame |
| Union Size | 4 in quick-disconnect |
| Housing Material | Plastic |
| Application | Commercial and large residential pools, water features |
| Country of Origin | United States |
| Shipping Dimensions | 38 x 28 x 26 in |
| Shipping Weight | 133 lb |
| Warranty | 2 years |
More Speck Commercial Pool Pumps
Shop all Speck Commercial Pool Pumps →-
Speck Pumps Normblock Multi 125/250 Commercial Pool Pump, 20 HP, 208-230/460V | NB715-1020F-016
-
Speck Pumps Normblock Multi Series Commercial Pool Pump, 20 HP, 208-230/460V, Three Phase | NB715-1020F-000
-
Speck Pumps Normblock Multi Series Commercial Pool Pump, 15 HP, 208-230/460V, Three Phase | NB715-1015F-000
-
Speck Pumps 21-80/33 GS Self-Priming Commercial Pool Pump, 4 HP, 208-230V, Single Phase | SA104-1400F-000
-
Speck Pumps Model 95-XI Commercial Pool Pump, 10 HP, 208-230/460V, Three Phase, TEFC | IG273-1100F-000
-
Speck Pumps Model 95-X Commercial Pool Pump, 7.5 HP, 208-230V, Single Phase | IG274-1750F-000
-
Speck Pumps Model 95-X Commercial Pool Pump, 7.5 HP, 208-230/460V, Three Phase, TEFC | IG273-1750F-000
-
Speck Pumps Model 95-IX Commercial Pool Pump, 5 HP, 208-230/460V, Three Phase, TEFC | IG273-1500F-000