Product Overview

The Paramount 2″ 2-Port 5-Gear Control Water Valve | 004302415603 is a replacement water valve used in compatible Paramount in-floor pool cleaning systems. This valve helps direct water flow between cleaning zones so the in-floor heads can pop up in sequence and move debris toward the pool drain or collection area.

A properly functioning control water valve is critical for in-floor cleaning performance. If your cleaning heads are not cycling correctly, zones are not activating, or the system has weak or inconsistent cleaning coverage, the valve assembly may need inspection or replacement.

This model is a 2″, 2-port, 5-gear control water valve. Always confirm your existing valve style, port count, gear configuration, plumbing size, and system compatibility before ordering.

Ideal For

Compatible Paramount in-floor pool cleaning systems
Replacing worn or failed water valve assemblies
Systems using a 2-port valve configuration
Systems requiring a 5-gear valve setup
Pool cleaning zones that are not cycling properly
Pool professionals servicing Paramount water valve systems
Restoring in-floor cleaning head sequencing and coverage

What’s Included

Paramount 2″ 2-port 5-gear control water valve
Valve housing and internal gear assembly components included with manufacturer packaging
Manufacturer-supplied replacement part packaging

What’s Not Included

Complete in-floor cleaning system
Cleaning heads or nozzles
Valve module parts not included by manufacturer packaging
Plumbing pipe or fittings
PVC primer or cement
Actuator or automation equipment
Debris canister
Installation labor
Additional O-rings, gaskets, or hardware unless supplied in packaging

Compatibility Guidance

The Paramount 004302415603 is intended for compatible Paramount in-floor pool cleaning systems that require a 2″, 2-port, 5-gear control water valve.

Before ordering, confirm the following:

You need part number 004302415603.
Your system uses a 2-port Paramount water valve.
Your plumbing size is compatible with a 2″ valve.
Your existing valve uses a 5-gear configuration.
Your cleaning system requires valve-controlled zone sequencing.
Your existing cleaning heads and plumbing zones are compatible with this valve.
Your pool professional has confirmed whether the issue is the water valve, valve module, pressure supply, filter flow, or cleaning heads.

Do not order this valve by pipe size alone. Paramount water valves are system-specific, and the correct port count, gear configuration, valve body, plumbing layout, and cleaning system design must be verified.

Confirm Before Ordering

Before purchasing, please verify:

You need the Paramount 004302415603 replacement valve.
Your existing valve is a 2″, 2-port, 5-gear configuration.
Your system is a compatible Paramount in-floor cleaning system.
Your plumbing layout matches this valve style.
Your valve issue has been properly diagnosed.
Your cleaning heads, nozzles, and system pressure have also been inspected.
You understand this is a water valve component, not a complete cleaning system.
Professional installation will be completed if plumbing changes are required.

Key Features

Genuine-style Paramount replacement water valve
Part number 004302415603
2″ valve size
2-port configuration
5-gear control valve design
Designed for compatible Paramount in-floor cleaning systems
Helps direct water flow between cleaning zones
Supports proper sequencing of pop-up cleaning heads
Useful for restoring in-floor cleaning coverage
Important system component requiring exact fitment
Professional installation recommended

Benefits

The Paramount 2″ 2-Port 5-Gear Control Water Valve helps restore proper water distribution in compatible in-floor pool cleaning systems. By directing flow between zones, the valve allows the cleaning heads to activate in the correct sequence and move debris more effectively across the pool surface.

Replacing a worn, damaged, or malfunctioning valve can improve cleaning coverage, restore head cycling, and help the system operate closer to its intended performance. This is especially important for pools that rely on in-floor cleaning instead of traditional manual or robotic cleaning as the primary cleaning method.

Recommended Use

Use this valve when a compatible Paramount in-floor cleaning system requires a 2″, 2-port, 5-gear water valve replacement.

Common signs that the valve may need service or replacement include:

Cleaning heads not cycling properly
Only one zone operating
Weak or uneven flow between zones
Valve gear failure
Visible valve damage or leaks
Poor cleaning coverage after pump/filter issues have been ruled out

If multiple heads are not popping up or water pressure is low across the system, inspect pump flow, filter pressure, clogged lines, valve internals, and cleaning heads before replacing the valve.

Installation Notes

This water valve should be installed by a qualified pool professional or experienced pool plumbing technician. Installation may involve plumbing disassembly, valve orientation, O-ring inspection, pressure testing, flow verification, and system startup testing.

Professional installation is recommended to ensure:

Correct valve model selection
Proper valve orientation
Correct plumbing connection
Leak-free installation
Proper gear and valve operation
Correct cleaning zone sequencing
Adequate water pressure and flow
Compatibility with the existing in-floor cleaning system
Safe startup and troubleshooting after installation

Improper installation or incorrect part selection may cause leaks, poor cleaning performance, valve failure, zone sequencing problems, or plumbing damage.

Important Fitment Note

This item is a 2″ 2-port 5-gear control water valve. It is not a universal valve and should not be used as a substitute for a different port count, gear count, plumbing size, or valve style.

If your existing system uses a different Paramount valve configuration, a different replacement part may be required.

Technical Specifications

Customer-Facing Q&A

Q: What is the Paramount 004302415603 used for?
A: It is a 2″ 2-port 5-gear control water valve used in compatible Paramount in-floor pool cleaning systems.

Q: Is this a complete in-floor cleaning system?
A: No. This is a control water valve component only. It does not include cleaning heads, nozzles, plumbing, or a complete cleaning system.

Q: What does the water valve do?
A: The valve directs water flow between cleaning zones so the in-floor cleaning heads can pop up and operate in sequence.

Q: What size is this valve?
A: This model is a 2″ valve.

Q: How many ports does this valve have?
A: This model has a 2-port configuration.

Q: What does 5-gear mean?
A: It refers to the valve’s internal gear configuration used to control sequencing in compatible Paramount systems.

Q: Will this fit every Paramount in-floor system?
A: No. Paramount water valves are system-specific. Confirm port count, gear configuration, plumbing size, and part number before ordering.

Q: Can I order this by pipe size only?
A: No. Pipe size alone is not enough. You must verify the valve style, port count, gear count, and system compatibility.

Q: What are signs that my control valve may need replacement?
A: Signs can include cleaning heads not cycling, zones not activating, visible valve leaks, uneven flow, gear failure, or poor cleaning coverage after other flow issues have been ruled out.

Q: Can I install this myself?
A: Professional installation is recommended, especially if plumbing changes, valve orientation, pressure testing, or system troubleshooting are required.

Q: What should I check before ordering?
A: Confirm that you need part number 004302415603, that your system uses a 2″ 2-port 5-gear valve, and that your pool professional has verified compatibility.