Product Description

Control filtration and backwashing with the Pentair 263064 2-Inch PVC Push-Pull Valve Kit. This genuine Pentair slide valve is designed for compatible side-mounted D.E. and sand filters with 2-inch plumbing connections and a 7-1/2-inch centerline.

The simple two-position design directs water through the filter during normal operation and reverses the flow during backwashing. Its push-pull handle provides straightforward operation without the additional settings found on a multiport valve.

Constructed with a durable PVC body, the Pentair 263064 is engineered for dependable performance in residential pool and spa filtration systems. It is an ideal replacement for a cracked, leaking, difficult-to-operate, or worn backwash valve.

Key Features

• Genuine Pentair OEM valve assembly
• Two-position push-pull operation
• Filter and backwash settings
• Designed for compatible D.E. and sand filters
• 2-inch PVC plumbing connections
• 7-1/2-inch centerline spacing
• Side-mount filter configuration
• Durable PVC valve body
• Minimal flow restriction
• Simple handle operation
• Direct replacement for Pentair part number 263064
• Complete valve kit for compatible applications

Product Benefits

• Provides simple switching between filtration and backwashing
• Helps restore proper flow direction through the filter
• Allows accumulated filter debris to be flushed to waste
• Two-position design is easy to operate
• PVC construction resists corrosion from normal pool-water conditions
• Preconfigured design simplifies installation on compatible filters
• Genuine Pentair construction provides dependable fit and performance

Specifications

Compatible Pentair Filters

The Pentair 263064 valve is designed for compatible side-mounted Pentair filters, including select models from the following product lines:

Pentair FNS Plus D.E. Filters

• FNSP24
• FNSP36
• FNSP48
• FNSP60

Pentair Quad D.E. Filters

• QUAD60
• QUAD80
• QUAD100

Pentair Sand Filters

• Select Triton II side-mount sand filters

Compatibility depends on the filter model, plumbing size, valve style, port arrangement, and centerline spacing. Confirm that the existing system requires a 2-inch slip-style push-pull valve with a 7-1/2-inch centerline before ordering.

When to Replace the Valve

Consider replacing the valve when:

• Water leaks from the valve body
• Water continuously escapes through the waste line
• The handle is difficult to push or pull
• The valve does not switch fully between positions
• The internal piston or seals are worn
• The valve body is cracked or damaged
• The existing plumbing calls for Pentair part number 263064

A leaking waste line may also be caused by worn internal valve seals. Inspect the complete assembly before determining whether a repair kit or full valve replacement is required.

Operating Instructions

Filter Position

The valve should remain in the filter position during normal pool circulation. In this position, water is directed through the filter media before returning to the pool.

Backwash Position

The backwash position reverses water flow through the filter and directs dirty water to the waste line. Backwashing removes accumulated debris from the filter media.

Always turn the circulation pump off before moving the push-pull handle. Moving the valve while the pump is operating can damage the valve, plumbing, or filter system.

Installation Information

Installation requires compatible 2-inch PVC plumbing and correct alignment with the filter ports. Confirm the following before installation:

• The pump is turned off
• Electrical power is disconnected
• Filter pressure has been completely released
• The filter uses side-mounted valve connections
• The plumbing size is 2 inches
• The required centerline is 7-1/2 inches
• The valve is oriented correctly for the filter type
• The waste and return lines are connected to the correct ports

Professional installation by a qualified pool technician is recommended. Incorrect plumbing or valve orientation may prevent proper filtration and backwashing.

Package Includes

• One Pentair 263064 push-pull slide valve kit

Only the components supplied by the manufacturer are included. Additional PVC pipe, fittings, adhesive, replacement filter O-rings, and installation materials may be required.

Frequently Asked Questions

Is this a multiport valve?

No. The Pentair 263064 is a two-position push-pull slide valve. It provides filter and backwash functions without the additional positions found on a multiport valve.

Does this valve work with both sand and D.E. filters?

Yes, it is designed for select Pentair sand and D.E. filters. The exact filter model, plumbing arrangement, and centerline spacing must be verified before ordering.

What is the plumbing connection size?

The valve is designed for 2-inch PVC plumbing connections.

What is the centerline spacing?

The filter connection ports have a 7-1/2-inch centerline spacing.

Are the connections threaded?

No. Pentair lists the 263064 as a slip-style PVC slide valve. Verify the connection style on the existing valve before purchasing.

Can the valve be moved while the pump is running?

No. Always turn the pool pump off and release system pressure before changing the valve position.

What are the two operating positions?

The valve has a normal filter position and a backwash position.

Is this the complete pool filter?

No. This listing is for the push-pull valve kit only. The filter tank, pump, filter elements, plumbing, and other equipment are not included.

Does it fit every Pentair Triton or FNS filter?

No. Compatibility varies by filter generation, model, port spacing, and plumbing configuration. Confirm the filter model and existing valve part number before ordering.